Processing Times Avg. 1-3 Business Days My Account (Sign In)  |  Cart Items: ( 0 )
Wholesale Supplies Plus
Graduation Cap Soap Recipe
Author: Wholesale Supplies Plus
Wednesday, April 23, 2014

These are perfect favors for your grad's party. Customize tassels to match your school color!

Wholesale Supplies Plus is not responsible for the products you create from our supplies.
You alone are responsible for product and recipe testing to ensure compatibility and safety.

Project Level: Moderate
Estimated Time: 1 Hour
Yield: 6 - Approx 1.6 oz Bars


  •  12 oz. Premium Extra Clear MP Soap Base - 2 lb Tray
  •  2 oz. Premium Ultra White MP Soap Base - 2 lb Tray
  •  2 oz. Black Raspberry Vanilla* FO 89
  •  1 Piece(s) Matte Black Soap Color Blocks
  •  1 Tablespoon(s) Bath Bomb Yellow Powder Color
  •  1 oz. Glycerin - Natural
  •  1 Piece(s) Round Guest Silicone Mold 1607
  •  1 Piece(s) Square Guest Silicone Mold 1609
  •  1 Piece(s) Deco-It: Ferns & Dragonflies Silicone Mold
  •  1 Piece(s) Cap for Lip Tube - White, Round


  •  Cookie Sheet
  •  Glass Measuring Cup
  •  Measuring Spoons
  •  Microwave or Double Boiler
  •  Plastic Bottle with Alcohol(spritzing)

INCI Ingredient Label: Propylene Glycol, Sorbitol, Water, Sodium Stearate, Sodium Laureth Sulfate, Sodium Laurate, Glycerin, Triethanolamine, Fragrance, Titanium Dioxide, Iron Oxides, Yellow 5 Lake

Recipe Directions

  1. NOTE: If you are making these products for sale, good manufacturing practices recommend you wear a hairnet, gloves and a mask. We also recommend a clean apron.
  2. Place round and square silicone molds on cookie sheet. This will give mold stability if it needs to be moved.
  3. Weigh 11 oz. of clear soap and cut into chunks. Place in glass measuring cup.
  4. Remove 1 black soap color cube from the clamshell. Cut in half and place both halves in glass measuring cup along with clear soap.
  5. Place glass measuring cup in microwave and heat for 30 seconds. If soap has not melted completely, heat in 10-15 second increments until soap is all liquid.
  6. Add 10 ml. (or 2 tsp) of fragrance oil and blend with spoon.
  7. Pour soap into all 6 round soap cavities. For the square soap mold, pour only a thin layer into each cavity. These should be about 1/8 inch thick.
  8. Once soap has completely hardened, remove soaps from molds and set aside.
  9. In a plastic beaker, pour 1 oz. of glycerin. Add about 1/4 teaspoon of Bath Bomb Yellow Powder.
  10. Mix powder into glycerin slowly using a mini-mixer or frother. Stir by hand before turning mixer on so the powder does not fly all over. Mix until powder is completely dissolved.
  11. Cut up 2 oz. of white soap and heat in microwave until melted. Check that soap temperature is no hotter than 125° F. Add yellow color until desired shade is achieved. Pour into middle band on Ferns & Dragonflies Deco-It mold. This piece will be cut into 3's so one piece will make 3 tassels.
  12. Let set up, about 10 minutes, then carefully remove from mold. Pour more yellow soap into band (soap may need to be reheated slightly). Pour remaining soap into 1 square cavity. This will be used for the button on the top of graduation cap.
  13. Cut each yellow band into 3 pieces. On one end of tassel, make 3 or 4 3/8" cuts to make bottom of tassel.
  14. Remove yellow square from mold. Using the white lip tube cap, cut out 6 buttons and set aside.
  16. In a plastic beaker, melt 1 oz. of clear soap. Take one round soap and spritz top with alcohol. Pour small amount of clear soap on top, spreading to cover entire area, and immediately place square soap on top positioning evenly over the round soap.
  17. Hold in place for a few seconds until soap hardens and top of cap sticks to bottom. Continue until all 6 caps are assembled.
  18. To place button on, spritz small amount of alcohol in middle of cap. Spread some of the melted clear soap on bottom of button and adhere to middle of cap. Hold for few seconds.
  19. On the end of tassel that will be glued to the top, take soap cutter or dull knife and make slightly curved to fit around button.
  20. Spritz top of cap again and put melted clear soap on part of tassel that will be glued next to the button. Hold in place until set. Gently bend tassel so it hangs down next to cap.
  21. Continue with remaining buttons and tassels until all caps are completed.
  22. Repeat above steps to make additional caps.
  23. If selling soaps, be sure to label according to the FDA guidelines.

  Questions & Answers (0)

Sign up for our newsletter
Get exclusive emails and offers!
1-800-359-0944 Get to Know Us Let Us Help You Savings Center
Monday - Friday
8:30AM - 4:00PM EST

We Proudly Accept
About Us
Privacy Pledge
Return Policy
Terms & Conditions
User Agreement
Digital Media Takedown Policy
Anti-Fraud/Bullying Policy

Contact Us
Frequently Asked Questions
Calculating Processing Times
Donate Your Change
Free Shipping Program
Off-Shore Shipping Policy
Adding To An Order
Money Saving Coupons
Rewards Program
Safe Sale Guarantee
WSP Bulk Purchases
Copyright © 2018 Inc. All Rights Reserved