International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
 |
Average Customer Rating: |
 |
(18 Reviews) |
Diane • Missouri
Date Submitted: 07/12/2017
I Recommend This Product!
|
 |
"Love this mold!" |
COMMENTS: Great size for honey gave soap
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
|
|
|
Dondra • Maryland
Date Submitted: 01/13/2017
I Recommend This Product!
|
 |
"so cute " |
COMMENTS: This is one of the cutest molds I have seen. I used it with honey MP and what a gorgeous soap it made. This is rigid plastic, so I did find it hard to unmold so I stuck in the freezer and shimmed them out like ice cubes.
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Maureen • Ontario
Date Submitted: 10/01/2016
I Recommend This Product!
|
 |
"Great Product" |
COMMENTS: I have had this mold now for a year and never had any problems removing my CP soap. Just put it in the freezer for 10-15 minutes before removing the soap. Cute design too.
|
PRODUCT USED IN: Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• the design
|
|
|
|
|
Alicia • Alabama
Date Submitted: 09/13/2016
I Recommend This Product!
|
 |
"I use this mold for my lotion" |
COMMENTS: These fit just perfect in your hand! They are easy to unmold the lotion bars! And the design is cute since I use alot of beeswax in my bars!
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
Jennifer • Ohio
Date Submitted: 04/15/2016
I Recommend This Product!
|
 |
"Can't go wrong with Milky Way Molds!" |
COMMENTS: Milky Way molds are the best plastic molds out there! I haven't had a Milky Way mold break yet!
|
PRODUCT USED IN: Soap - Melt & Pour, Lotion Bars & Sticks
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• sturdy • cute designs • usually a spot to make a little sample
|
|
|
|
|
Chih • California
Date Submitted: 02/27/2016
I Recommend This Product!
|
 |
"Really cute design" |
COMMENTS: I really think that this design is really cute. It has great details without looking like it's too complicated or messy on the finished soap. The size is nice. This is a plastic mold, so you do have to be a little more careful with temperature and when you pop it out. Overall I think it's really cute!
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
JONELLE • Florida
Date Submitted: 01/13/2016
I Recommend This Product!
|
 |
"A Well-designed Mold" |
COMMENTS: I find this mold easy to use, easy to fill just the bee in a contrasting color, and easy to remove the soap from the mold. I like to take some sparkle mica and dry-brush it over the bee after the soap is set for a pretty presentation.
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Angie • New York
Date Submitted: 09/30/2015
I Recommend This Product!
|
 |
"Love this mold!" |
COMMENTS: Favorite amongst customers! Nice size for handheld soaps!
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Shannon • California
Date Submitted: 07/15/2015
I Recommend This Product!
|
 |
"Cute and made with quality" |
COMMENTS: Very cute addition for all the bee lovers out there.
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
Ashley & Tina • Pennsylvania
Date Submitted: 05/07/2015
I Recommend This Product!
|
 |
"LOVE!" |
COMMENTS: This makes a beautiful soap that fits nicely in your hand. It's the perfect size for samples or facial bars. I used all sorts of bases mixed with honey in this mold and each one popped out without a problem. I placed in freezer for quicker hardening and molds released product very well. Customers absolutely love the detail in the design.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Beautifully detailed design. • Size is just right. • Releases product perfectly.
|
|
|
|
|
Sharon • Ontario
Date Submitted: 11/27/2014
I Recommend This Product!
|
 |
"Easy to use/release" |
COMMENTS: Sturdy and made well with good detail - used Goat Milk & Honey Fragrance Oil and it was like a match made in soapy heaven :)
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Dane • Massachusetts
Date Submitted: 12/09/2013
I Recommend This Product!
|
 |
"Creates very detailed bars." |
COMMENTS: Durable mold which continues to yield perfect shapes. You can put differently colored soap in the bee indentation, or a little bit of cinnamon, and it will look just as good as it sounds. Almond or oatmeal/milk/honey are ideal fragrance choices. A great seller.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Allows for some very nice designs.
|
|
|
|
|
jennifer • Minnesota
Date Submitted: 12/09/2013
I Recommend This Product!
|
 |
"Looks great!" |
COMMENTS: I used the oatmeal, milk, and honey fragrance with the clear melt and pour. Added some gold mica & voila! They turned out beautifully!
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Julia • Ohio
Date Submitted: 12/04/2013
I Recommend This Product!
|
 |
"Lotion Bar Mold" |
COMMENTS: I use this mold to make my lotion bars. My customers love the motif, they just love the wee bee! Nice size for a lotion bar fits in the hand well and isn't too bulky to use. Bars pop right out of the mold easily which is a huge plus!
|
PRODUCT USED IN: Lotion Bars & Sticks
|
|
|
Marilyn • Tennessee
Date Submitted: 08/24/2013
I Recommend This Product!
|
 |
"Very Nice Soap Mold" |
COMMENTS: The honeycomb soap mold is excellent my soaps unmold very easily..very pretty detail for my soaps.
My customer's just simply love this soap!
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Kathleen • Connecticut
Date Submitted: 12/20/2004
I Recommend This Product!
|
 |
"Adorable!" |
COMMENTS: This is one of the cutest honeycomb molds I've seen. Perfect for honey based soaps.
|
PRODUCT USED IN: Soap Products
|
|
|
LAURA • Florida
Date Submitted: 08/26/2004
I Recommend This Product!
|
 |
"GREAT WITH HONEY BASED SOAP" |
COMMENTS: THIS IS MY ABSOLUTE FAVORITE MOLD. I USE IT WITH THE HONEY BASE, GOLD SPARKLE AND HONEY ALMOND FRAGRANCE. FAMILY AND FRIENDS LOVE IT AND ASK FOR MORE!!
|
PRODUCT USED IN: Soap Products
|
|
|
Karen • North Carolina
Date Submitted: 03/22/2004
I Recommend This Product!
|
 |
"My favorite mold!" |
COMMENTS: This is the cutest mold ever and easy to create a dripping-with-honey effect by overpouring the first layer and sucking up the excess with a dropper.
|
PRODUCT USED IN: Soap Products
|
|
|
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
0 Question(s) Shown Below |
If you used this product to create a masterpiece of your own, please share your ideas with others. Uploaded products can link directly to your Handmade Store so customers can purchase directly! |
Add Your Product |