International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
 |
Average Customer Rating: |
 |
(3 Reviews) |
|
Elizabeth • Colorado
Date Submitted: 05/13/2017
I Recommend This Product!
|
 |
"Undulations Tray Soap" |
|
COMMENTS: My hot process soap got "stuck" in the mold. I just let it sit an extra day and the unmolding was much easier.
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Kelly • California
Date Submitted: 07/15/2016
I Recommend This Product!
|
|
"melt and pour" |
|
COMMENTS: I used this mold to make a baby shower gift. I do not have any complaints. My customers think it is cute because of the design. I call my soap baby shower circles.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy relase of product
|
|
|
|
|
|
Nikki • Pennsylvania
Date Submitted: 06/04/2016
I Recommend This Product!
|
|
"Cool!" |
|
COMMENTS: This mold is a hit with men! Held up well, soap came out easily. There's one corner of the mold that's a little hard to get the design right, but I might just need a little more practice with it. (Made 2 batches so far with the same outcome.)
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
0 Question(s) Shown Below |
-1_t.jpg)
