Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
 |
Average Customer Rating: |
 |
(2 Reviews) |
Karen • Washington
Date Submitted: 09/10/2017
I Recommend This Product!
|
 |
"Very Cool Mold" |
COMMENTS: I had a custom order for a couple who were having pineapples as their theme for their wedding and wanted a nice size soap to set at each persons table setting to use as a decoration as well as a Thank-You gift for coming to the wedding. THEY LOVED THESE SOAPS! Not too big but not too small.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
|
|
|
|
|
kris • Florida
Date Submitted: 03/06/2017
I Recommend This Product!
|
 |
"Pineapple Fruit Soap mold MW417" |
COMMENTS: Sturdy hard plastic. Nice 5 oz sized soaps. Have used for MP and for cold process. I put mold in freezer prior to unmolding for CP and they came out of mold very easily.
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
1 Question(s) Shown Below |
If you used this product to create a masterpiece of your own, please share your ideas with others. Uploaded products can link directly to your Handmade Store so customers can purchase directly! |
Add Your Product |