Wholesale Supplies Plus
Pamper Me Pedicure - Blue MP Soap Recipe

Yield: 12 Bars  |  Est. Time: 2 Hours  |  Level: Moderate

About This Recipe:
This soap is great in the shower. The round shape is easy to hold while washing and scrubbing dry, callus areas on knees, elbows and feet. 


Shopping List:
(2) 2 lb Premium Extra Clear MP Soap Base - 2 lb Tray

(1) 2 lb Premium Oatmeal MP Soap Base - 2 lb Tray

(1) 2 fl. oz Abalone & Sea Fragrance Oil 314

(1) 12 Piece  7/8 inch Luffa

(1) 1 Block La Bomba Blue Sparkle Mica Soap Color Blocks

(1) 1 Mold Round Basic Silicone Mold 1602


Recipe Ingredients:
Measure ingredients with a scale or precise measuring tool.

• 48 oz. Premium Extra Clear MP Soap Base - 2 lb Tray
• 16 oz. Premium Oatmeal MP Soap Base - 2 lb Tray
• 1.80 oz. Abalone & Sea Fragrance Oil 314
• 12 Piece(s)  7/8 inch Luffa
• 0.20 oz. La Bomba Blue Sparkle Mica Soap Color Blocks


Equipment From Home:
• (1) Microwave
• (1) Microwave-Safe Measuring Cup (32 oz.)
• (1) Microwave-Safe Measuring Cup (8 oz.)
• (1) Spatula
• (1) Spray Bottle with Rubbing Alcohol
• (1) Plastic Wrap
• (1) Scale - Digital Display
• (1) Thermometer - Digital
• (1) Soap Cutter & Cutting Mat

Directions:
NOTE: If you are making these products for sale, good manufacturing practices recommend you wear a hairnet, gloves and a mask. We also recommend a clean apron.
  1. to make 12 bars of soap, recipe must be made twice. 
  2. To microwave-safe measuring cup add 24 oz. cut up Extra Clear MP Soap. 
  3. Add 0.10 oz. blue color bar to soap
  4. Heat in microwave for 3 minutes or until melted. 
  5. Add 0.70 oz. Fragrance Oil and mix well.
  6. Place a luffa slice into each of the 6 mold cavities.
  7. Pour soap into each mold leaving ¼" of space. Spritz with alcohol and allow to harden.
  8. To clean microwave-safe measuring cup, add 8 oz. cut up Oatmeal MP Soap Base.
  9. Heat in microwave in 30 second increments until soap has melted.
  10. Add 0.20 oz. Fragrance Oil and mix well. Wait until temperature is 130°F or below.
  11. Spritz blue soaps with rubbing alcohol and then fill mold cavities with melted soap.
  12. Allow to harden and remove soap bars from mold. Wrap airtight in plastic wrap.
  13. Repeat to make 6 additional soaps. 
  14. Label accordingly.
To Use: Lather onto wet skin. Rinse off with warm water. 

Ingredient Label: Sorbitol, Propylene Glycol, Sodium Laureth Sulfate, Stearic Acid, Myristic Acid, Water, Sodium Hydroxide, Sodium Cocoyl Isthionate, Oatmeal, Coconut Oil, Glycerin, Luffa, Fragrance, Titanium Dioxide, Mica, Ultramarine Blue.

We are not responsible for the products you create from our supplies.
You alone are responsible for product and recipe testing to ensure compatibility and safety.