Wholesale Supplies Plus
Pineapple MP Soap Pops Recipe

Yield: 6 Bars  |  Est. Time: 1 Hour  |  Level: Moderate

About This Recipe:
Cool off in the shower or tub with these soapy treats. The sweet smell of Pineapple Punch will stay with you all day long, don't forget to remove the stick before using! 


Shopping List:
(1) 2 lb Premium Extra Clear MP Soap Base - 2 lb Tray

(1) 2 lb Premium Ultra White MP Soap Base - 2 lb Tray

(1) 2 fl. oz Pineapple Punch* Fragrance Oil 229

(1) 2 oz Vanilla Color Stabilizer - MP Soap

(2) 1 Block Stained Glass Lemon Yellow Soap Color Blocks

(1) 1 Mold Soap Popsicle Silicone Mold 1617

(1) 1 Mold Guest Loaf Silicone Mold 1502

(6) 1 Piece Soap Pop Sticks

(1) 1 Each Hairnets - 24 inch Disposable

(1) 1 Piece Beaker - Natural Polypropylene


Recipe Ingredients:
Measure ingredients with a scale or precise measuring tool.

• 7 oz. Premium Extra Clear MP Soap Base - 2 lb Tray
• 18 oz. Premium Ultra White MP Soap Base - 2 lb Tray
• 0.50 oz. Pineapple Punch* Fragrance Oil 229
• 0.50 oz. Vanilla Color Stabilizer - MP Soap
• 0.60 oz. Stained Glass Lemon Yellow Soap Color Blocks
• 1 Piece(s) Soap Popsicle Silicone Mold 1617
• 1 Piece(s) Guest Loaf Silicone Mold 1502


Equipment From Home:
• (1) Microwave
• (1) Microwave-Safe Measuring cup (32 oz.)
• (1) 1 Each Scale - Digital Display (Professional)
• (1) 1 Each Thermometer - Infrared, Dual Laser
• (1) 1 Piece Straight Soap Cutter
• (1) Cutting Mat
• (1) Spray Bottle with Rubbing Alcohol - 71% or higher
• (1) Plastic Wrap
• (1) 1 Piece 20/410 Natural Ribbed Sprayer Top - Clear Cap

Directions:
NOTE: If you are making these products for sale, good manufacturing practices recommend you wear a hairnet, gloves and a mask. We also recommend a clean apron and workspace.
  1. To microwave safe measuring cup, add Clear Soap Base and 0.30 oz. Lemon Yellow Color Bar. Heat in microwave until melted.
  2. Pour soap into Guest Loaf Silicone Mold and let set up.
  3. Remove soap from mold and cut up into small chunks. Set aside.
  4. To large, clean measuring cup add White Soap Base and 0.30 oz. Lemon Yellow Color Bar. Heat in microwave until completely melted.
  5. In plastic beaker, add Fragrance Oil and Vanilla Color Stabilizer. Mix and let sit for 2 minutes. Add to melted soap and stir.
  6. When soap has cooled to 130°F, spritz yellow soap chunks with rubbing alcohol.
  7. Pour a small amount of melted soap into the bottom of first soap pop cavity. Follow with a small handful of bright yellow chunks. Pour more melted soap over, being sure to tap the mold to get soap down between the pieces. Continue in this manner until the soap cavity is filled to the top. Spritz with rubbing alcohol.
  8. Repeat this process until all 6 cavities have been filled. Place lid on mold and insert popsicle sticks halfway into each soap. Let completely harden.
  9. Remove soaps from mold being careful not to pull on the sticks.
  10. Wrap each bar in plastic wrap. Label product accordingly. Be sure to put a warning on your label such as "DO NOT EAT".
To Use: Remove stick from soap. Lather onto wet skin. Rinse off with warm water.

Ingredient Label: Sorbitol, Propylene Glycol, Sodium Laureth Sulfate, Stearic Acid, Myristic Acid, Water, Sodium Hydroxide, Sodium Cocoyl Isethionate, Fragrance, Titanium Dioxide, Glycerin, Sodium Myristate, Yellow 5.

We are not responsible for the products you create from our supplies.
You alone are responsible for product and recipe testing to ensure compatibility and safety.