Equipment & Molds

Silicone Mold for cold processed, melt & pour, hot processed soaps, bombs & fizzies, lotion bars, wax, ceramic crafts and candies. (To avoid cross-contamination, do not use for food after using for anything else).
Molds can tolerate temperatures up to 428F (220C). Above these temperatures, warping may occur.
Soap is easiest to release 12-24 hours after cooling.
Hand wash with warm, soapy water
Actual mold color may vary
Material: BPA-Free Silicone
Dimensions: 3.125 x 2.75 x 1.875"
Cavity qty: 6
Ounces per bar: 4.0 - 4.75

Measuring cups are an easy way to transfer and measure liquids.
Graduated measurements of oz, cc, ml, tbs & drams.
Capacity: 1 oz (30 ml) = Approx 2 Tbs
Length: 1.75" Diameter x 1.5" High
Material: Polypropylene

Soap mold for cold processed, melt & pour, hot processed soaps, bombs & fizzies, lotion bars, wax, and ceramic crafts.
Molds can tolerate temperatures up to 140F (60C). Above these temperatures, warping may occur.
Soap is easiest to release 12-24 hours after cooling.
Hand wash with warm, soapy water
Material: PVC Plastic
Dimensions: 2.75 x 3.625 x 1.25"
Ounces per bar: approximately 7.6 oz each (2 lb 14 oz total) (
Cavity qty: 6 - Tray molds do not produce individual bars. Entire tray will need to be filled, then cut into bars.

Lip Balm Filling Tray will allow you to fill 50 Slim Line Lip Balm Tubes without the drips or spills and in significantly less time than hand filling. (Tubes from different manufacturers may not fit this tray.) After pouring your lip balm & allowing it to cool, quickly scrape excess balm from the surface with our Flat Spatula Scraper. This tray was custom designed for our slim lip tubes, so we cannot guarantee that tubes from any other supplier will fit.
Filling Trays should not be used with waxes heated above 140° F.
Actual tray color is blue and measures 10" long x 4.5" wide x .5" deep.