Visit Us – Pick Up Orders Save 10% (Read More)
FREE SHIPPING ~ On Orders Over $25*
 
 
Wholesale Supplies Plus
0
 
   
 
 
 
Molds All Molds Cross & Christian - (You Are Here - P10440)

Crafters Choice™ Cross Column Silicone Soap Mold 2015

Pricing
$27.07 for 1 Mold
$117.84 for 5 Mold
$495.30$707.57 for 34 Mold (Bulk)



Additional Information
Create a cross-shaped column to be used in a loaf with this silicone soap mold. Craft Easter inspired soaps with this mold or create a design to be sold at you church fundraiser! Embed fits in Crafter’s Choice Regular Loaf Silicone Mold 1501 and Rectangle Regular Column Silicone Soap Mold 2009.

Holds approx. 6 fl. oz.

Country Of Origin: China

Helpful Product Information:
Style: Column Bar Cavities: 1
Bar Depth: 2" Bar Length: 8.125"
Bar Width: 1.375" Max Pour Temperature: 135°F
Max Temperature: 500ºF



This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Close the mold by firmly pressing the edges together. For added safety, clamp the edges. Slowly pour melted soap no hotter than 130ºF into mold. Allow soap to harden then open mold and remove soap. Trim edges with a potato peeler or spatula. Embed soap into a loaf or slice into bars.

Cold Process Soap: Close the mold by firmly pressing the edges together, and clamp the edges. Slowly pour traced soap into mold. After at least 24 hours, open mold and remove soap with gloved hands. Trim edges with a potato peeler or spatula. Embed soap into a loaf or slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Care:
Hand wash mold in warm, sudsy water.
SDS & Documents
Questions & Answers (3)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 3 Question(s) Shown Below



Q Bubble
Posted By: Kim   |   August 16, 2017

"How many ounces of soap does this mold hold? "




Q Bubble
Posted By: Emily   |   November 01, 2015

"Would I be able to make cold process soap with this mold?"




Q Bubble
Posted By: Victoria   |   September 04, 2015

"How much will the soap weigh? "


Recipes & Videos (0)
CustomerReviews (13)
Submit A Rating Average Customer Rating: (13 Reviews)



zaliaw • Nevada

Date Submitted:  04/27/2019

I Recommend This Product!
" Beautiful Cross"
COMMENTS:  I love this column mold! I got it for a soap I did for Easter. It was a hit! The cross is ornate but not overly so. It is the perfect height embed for 1400 g mold. The only drawback is you have to make two if you want it all the way through your soap. I read some reviews that said some people had issues with the mold leaking, I had no such issues. I made sure the mold was closed properly, with all the seams aligned. I purposely did not use clamps because I wanted to see if it would leak. In my case, they were not necessary. All in all, as I sad, it preformed beautifully with no drip, no runs and no errors. Thank you for a lovely mold!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• The length of the mold. It needs 3” more
Danielle • Pennsylvania

Date Submitted:  01/13/2018

I Recommend This Product!
"Beautiful cross! But be careful..."
COMMENTS:  ...this will trap air bubbles when used in a horizontal loaf.
PRODUCT USED IN:   Soap - Melt & Pour
Jocelyn • Florida

Date Submitted:  11/14/2017

I Recommend This Product!
"Perfection"
COMMENTS:  This mold is absolutely beautiful. I had no problems with leaking - used it with crimson and pine melt and pour soap - two colors poured at a cool temp made an incredible swirl inside this mold for embed. I couldn’t be happier.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• No leaking
• Easy to unmold
• Beautiful shape
Maria • Georgia

Date Submitted:  09/13/2017

I Recommend This Product!
"Cross column silicone mold"
COMMENTS:  I made a awesome M&P soap.. It looks really beautiful using the cross in the middle. People loved it!
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Easy to use
• Nothing
Ella • Michigan

Date Submitted:  08/02/2017

I Recommend This Product!
"Beautifu;!"
COMMENTS:  This is a beautiful cross, used for imbeds. Easy to extricate the soap.
PRODUCT USED IN:   Soap - Cold Process
JACQUELYN • Kansas

Date Submitted:  11/07/2016

I Recommend This Product!
"Cross mold"
COMMENTS:  I love this mold. The soap I created with it is awesome. A best seller.
PRODUCT USED IN:   Soap - Melt & Pour
carola • Ohio

Date Submitted:  07/23/2016

I Recommend This Product!
"Love this mold! "
COMMENTS:  First time using this type of mold. Very nicely made and easy to use.
PRODUCT USED IN:   Soap - Melt & Pour
Karen • Washington

Date Submitted:  07/19/2016

I Recommend This Product!
"So Fun To Add Shapes Into Soaps"
COMMENTS:  I love all of the silicone column molds. It is kind of tricky when you first start using them as you have to make sure you have them well sealed all the way around, but once you master that, it is a breeze. I love putting them in my M & P loves for added character in my bars.
PRODUCT USED IN:   Soap - Melt & Pour
Leslie • Ohio

Date Submitted:  05/12/2016

"Nice, but...."
COMMENTS:  I was a little hesitant to buy this mold due to reviews stating that it leaked. However, I was pleasantly surprised to find that when I tried it out I didn't have any issues with it leaking. The only problem I had is that the mold bulged out in the middle. I ended up with soaps with embedded detail that looked more like angels. :( On the upside, unmolding was a breeze.

WSP Response:Next time you use this mold try pouring it in three sections to help prevent bowing. Pour the fist third and spritz with alcohol and allow to harden and then spritz again before pouring the second third. Repeat with the final third.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• beautiful design
• did not leak
• sturdier to avoid bulging out
Rachelle • Colorado

Date Submitted:  04/01/2016

I Recommend This Product!
"Pretty Shape"
COMMENTS:  This is a pretty shape. I agree it is more difficult to get the soap out, but I managed by going very slowly and really twisting the silicon back with no damage to my embed.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Shape and size
• Make it easier to release
Cory • Alabama

Date Submitted:  03/31/2016

I Recommend This Product!
"Great mold!"
COMMENTS:  I had a vision of how I wanted my soap to be and this hit it right on the mark.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Tammy  • California

Date Submitted:  01/16/2016

I Recommend This Product!
"Crafters Choice Cross Column Silicone Soap Mold"
COMMENTS:  Great mold. Easy to use and work with. Just love it
PRODUCT USED IN:   Soap - Melt & Pour
Rachel • Colorado

Date Submitted:  12/04/2015

I Recommend This Product!
"Cute, but...."
COMMENTS:  This mold is lovely, and I had plans to use a turquoise color in this mold and embed in a chocolate brown soap for a cute western chic look. However, getting the soap out of this mold has proven difficult. I did't use SL, so can't speak to if that would help. I attempted to unmold after 2 days and it was very soft. (My recipe usually unmold of from silicone) I forgot about it and tried a week later.... Still too soft. The freezer helped, but was still hard to unmold the horizontal part of the cross without pulling off one side or another. The mold itself is a nice silicone, snaps together well, and doesn't leak. The mold itself would get 5 stars from me. The design though is hard to unmold, so keep that in mind when purchasing. :)
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Cute
• Quality mold
• Doesn't leak with even very thin traced
Customer Photos (0)
Charts & Calculators
 
 
Stay updated on sales, new products, free recipes, and more.
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Adding To An Order
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Site Feedback

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2019 Wholesale Supplies Plus, LLC - All Rights Reserved