Milky Way™ American Flag Soap Mold (MW 299) - Wholesale Supplies Plus
 
Current Processing Times: 1-2 Business Days
 
 
Wholesale Supplies Plus
 
   
 
 
 
Soap Molds Plastic & Silicone Molds Flags & Americana - (You Are Here - P1456)

Milky Way™ American Flag Soap Mold (MW 299)

Pricing







Additional Information
Show your patriotism with this beautiful American Flag Soap Mold! Complete with 50 stars and 13 stripes, this detailed mold is perfect for an Americana holiday or themed party.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 5.1 oz Bar Cavities: 3
Bar Depth: 1" Bar Length: 3 7/8"
Bar Width: 2 1/2" Mold Capacity (oz): 15.3

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients


Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (0)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 0 Question(s) Shown Below

Recipes & Videos (0)
CustomerReviews (4)
Submit A Rating Average Customer Rating: (4 Reviews)



Derek • Missouri

Date Submitted:  05/13/2019

I Recommend This Product!
"Love"
COMMENTS:  Perfect size and very nice quality!
PRODUCT USED IN:   Bath Fizzies & Salts
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• everything
• nothing
Home • Michigan

Date Submitted:  08/23/2018

I Recommend This Product!
"Great large bar of soap"
COMMENTS:  I made bars of soap for all my friends for 4th of July and these were a big hit. Creates a large substantial bar and if you pour carefully you can alternate red and white colored soaps in the stripe cavities and blue where the stars are. For a plastic mold the soaps come out easy. Just put in the freezer for a couple minutes, turn upside down and apply pressure to create air gaps.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• substantial size
• can pour stripes and blue star area
• fairly easy to release
Rachelle • Colorado

Date Submitted:  10/19/2016

I Recommend This Product!
"Flag Mold"
COMMENTS:  This flag is cute for the 4th of July. The soap comes out of the mold nicely. I did the three color red, white, and blue swirl.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Easy to use.
• Comes out of the mold nicely.
Victoria • California

Date Submitted:  09/11/2016

I Recommend This Product!
"American Flag Mold"
COMMENTS:  People love this mold; I use rub on color for it and so far have made it only with a fragrance of Leather which is hugely popular.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• popularity with customers
• size of bar
Customer Photos (0)
Charts & Calculators
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Careers/Job Openings

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved