Milky Way™ Apple Small Round Soap Mold (MW 152) - Wholesale Supplies Plus
Current Processing Times: 3-4 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Fruit - (You Are Here - P9497)

Milky Way™ Apple Small Round Soap Mold (MW 152)


Additional Information
The round Wax Tart Apple mold is used for making wax tarts for a potpourri or tart burner. When the scented tart heats up, it fills the room with aroma. The molds are also great for small guest soaps.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Wax Tarts.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 0.65 oz Bar Cavities: 8
Bar Depth: 0.875" Bar Diameter: 1.5
Bar Length: 1.5" Bar Width: 1.5"
Max Temperature: 145 Mold Capacity (oz): 5.2

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (5)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 5 Question(s) Shown Below

Q Bubble
Posted By: Heather   |   February 17, 2014

"Whats the best way to pop these out? And how long should you wait to unmold?"

Q Bubble
Posted By: Samantha   |   February 23, 2014

"Can you spray these prior to pouring to help release the soap when it's time to remove from mold? "

Q Bubble
Posted By: andrew   |   August 29, 2013

"Can you recycle these molds if they are broken?"

Q Bubble
Posted By: andrew   |   August 29, 2013

"What kind of plastic are these made from?"

Q Bubble
Posted By: andrew   |   August 29, 2013

"What is the maximum pour temperature for plastic molds? "

Recipes & Videos (3)
CustomerReviews (4)
Submit A Rating Average Customer Rating: (4 Reviews)

Laurel • New York

Date Submitted:  10/17/2018

I Recommend This Product!
"Apple Mold"
COMMENTS:  This is one of the best molds for the season. Nice big Apple shape that looks great with Glycerin soap
PRODUCT USED IN:   Soap - Melt & Pour
Lisa Johnson • Ohio

Date Submitted:  08/14/2016

I Recommend This Product!
"Perfect size for wax melts"
COMMENTS:  This mold was purchased specifically for wax melts, but also works great for small MP soaps to be included in gift bags or CP samples. No issues popping out the product and I never put products in the freezer to assist removal...just 25+ years of learning when and how to remove the product without damaging the molds!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Candles - Paraffin
Jessica • Florida

Date Submitted:  12/08/2014

I Recommend This Product!
"Bath fizzles"
COMMENTS:  Thus is a nice size for the bath fizzles. A strong mold but flexes enough to release the fizzles.
PRODUCT USED IN:   Bath Fizzies & Salts
Nyota • Connecticut

Date Submitted:  09/08/2013

I Recommend This Product!
"Absolutely Adorable"
COMMENTS:  These molds make the cutest guest soap melt and pour molds. However, they are flexible enough to be used for wax tarts, bath bombs, homemade chalk projects, etc. A good buy all around.
PRODUCT USED IN:   Soap - Melt & Pour
• Price
• Easy to clean
• Easy to bend the mold when unmolding
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved