We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
The word arabesque comes from an ornamental design consisting of intertwined flowing lines, originally found in Arabic or Moorish decoration. The Arabesque Soap Mold Tray makes eight stunning bars.
Helpful Product Information:
Material: Plastic
Style: Tray
Avg. Bar Weight: 4 oz
Bar Cavities: 8
Bar Depth: 1.25"
Bar Length: 1.8"
Bar Width: 3.5
Max Temperature: 145ºF
Mold Capacity (oz): 32
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Wholesale Supplies Plus, Inc. certifies that this fragrance product is in compliance with the standards of the International Fragrance Association, provided the fragrance is used in the above application (s) at the noted maximum concentration level(s).
The "Maximum Use Level for Skin Exposure" is the amount of fragrance, flavor and essential oil that can come in contact with the skin. It does not mean that your base product can perform at these levels. You must test each oil in each application for evaluation of desired performance.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: This is a nice mold. It makes a little taller/narrower 4oz bar, which is good for some of my customers with arthritis. It's a fun design without being too pinned down to your colors or scent choices. I do agree with the other review that it would be nice if the sides were straighter, so the bars were more uniformed. This may make it harder to unmold though, and the unmolding process was very easy.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy to use • Bar Dimensions
• Straighter sides for more uniformed bars
Shelly • Missouri
Date Submitted: 11/14/2018
I Recommend This Product!
"Makes a beautiful soap"
COMMENTS: My customers and I love this design. It can be very elegant or bohemian depending on the colors you chose to use. I would like the sides straighter so that the edges are neater, not flared. Easy to unmold after a bit of time in the freezer.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Nice design
• Would like the sides less flared
Zoie • North Carolina
Date Submitted: 08/26/2018
I Recommend This Product!
"Very Pretty Bars"
COMMENTS: I really like the way my soap came out in this mold. Each bar is different and unique and I like that even tho the bottom bars are slightly smaller than the rest. Very good mold, you can easily change the feel of this mold with the type of soap and coloring you use so that you can get a lot of variety from it. Very nice mold!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Detail • Ease of Use
• Making the bar lines a bit more even
Amber • Florida
Date Submitted: 01/18/2018
I Recommend This Product!
"Gorgeous! "
COMMENTS: Another winner MW mold!! The bars produced in this mold are absolutely breathtaking! Each one is unique in it's own beautiful way, and I love how deep this mold is, so the bars are a nice, hearty size! I did notice that the cut lines are just ever so slightly off, making the bottom 2 corner bars a tad smaller than the others, but honestly, I'm so happy with this mold that the slight difference doesn't bother me enough to knock it down a star. This is a 5 star mold through and through! So extremely easy to use, unmold, clean & use over & over again! Gives CP soap the most incredibly smooth look! The durability, ease of use, look of the bars and phenomenal price of these molds makes it so easy to get addicted & justify buying more! Thank you so much WSP for carrying these molds! Silicone will always be my first love, but every time I make a batch of soap in a MW mold, I'm blown away by how beautiful the bars turn out!
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Gorgeous & unique design! • Makes CP look so smooth! • Very durable! Easy to use & clean.
Jamie • Arizona
Date Submitted: 01/03/2018
I Recommend This Product!
"Arabesque Soap Mold Tray"
COMMENTS: Love the detail left on the bar of soap! Very beautiful. Used with MP soap, easy removal and made a CP batch and allowed it to sit for 48 hours and it popped right out. I always use sodium lactate in all my cp batches especially if using anything besides a log mold.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Detail of bar
• Would like to see bigger for 5 oz bars
caridad • Florida
Date Submitted: 05/25/2017
I Recommend This Product!
"Perfect"
COMMENTS: It was perfect for my exfoliatingbath bar
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Shape • Flexibility
• Nothing
JACQUELYN • Kansas
Date Submitted: 01/02/2017
I Recommend This Product!
"Arabesque mold"
COMMENTS: This is a beautiful mold
Love it.
PRODUCT USED IN: Soap - Melt & Pour
Stilltipping3 • Nevada
Date Submitted: 12/12/2016
I Recommend This Product!
"Mold tray I use for soaps"
COMMENTS: This is a nice size tray with a great design. It makes 8 bars if you use the lines that are made in the mold for cutting bars. I will use this again and recommend you get this mold.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Size and depth • Design • Lines in mold helps you make good cuts
• Plastic to silicone
Katherene • California
Date Submitted: 12/02/2016
I Recommend This Product!
"Nice mold... Nice Design"
COMMENTS: I like the Arabesque design of this mold. I used it to make melt & pour soap which I am planning to give as gifts for Christmas. Nice design. Gave my soap a professional look. Keep the different designs coming.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Nice design
• None
Nora • Arizona
Date Submitted: 04/26/2016
I Recommend This Product!
"Second time ordered !"
COMMENTS: I really love the design!
PRODUCT USED IN: Soap - Melt & Pour
Kimberly • Michigan
Date Submitted: 04/13/2016
I Recommend This Product!
"love"
COMMENTS: love this mold tray! it looks so awesome on the finished product!! will definatly get more of the milky way molds!
PRODUCT USED IN: Soap - Melt & Pour
mountain knitter • California
Date Submitted: 02/17/2016
I Recommend This Product!
"Beautiful and elegant looking soap"
COMMENTS: I LOVE this soap mold. It makes beautiful and elegant soap. Easy to use and easy to remove.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• everything
• nothing
Carla • Florida
Date Submitted: 03/05/2015
I Recommend This Product!
"Love this mold!"
COMMENTS: I was looking for something different for my m&p soap and this was it. The soap comes out with this wonderful design. I'm in love!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Great design • Easy to remove soap
• None
Patricia • New Mexico
Date Submitted: 02/17/2015
I Recommend This Product!
"Elegant"
COMMENTS: Doesn't matter what colors or designs you use with this mold, it just turns out elegant bars of soap. One of my favorites AND it makes 8 good sized bars. Not often you get a mold with so many cavities that has such a great pattern.
PRODUCT USED IN: Soap - Melt & Pour
Dunja • New York
Date Submitted: 09/23/2014
I Recommend This Product!
"Beautiful Design"
COMMENTS: This mold is perfect for when you want a little flair. Simply make sure your molding area is level, pour in and let cool. It's super easy to un-mold and then just cut. You can even use the crinkle style cutter to give it some extra style. Very durable and easy to hand clean.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Flexible, Easy to un-mold and clean.
health • Minnesota
Date Submitted: 09/22/2014
I Recommend This Product!
"beautiful mold"
COMMENTS: I've made cp soap so far in this mold and I like it, but I'm planning to make hp soap too. My cp soap thickens fast so it's hard to push it in without bubbles, but I had time to do 2 colors and spoon them interchangeably. I like that I get 8 soaps not 3 for the same price.
PRODUCT USED IN: Soap - Cold Process
Shari B • Tennessee
Date Submitted: 05/30/2014
I Recommend This Product!
"Soap Mold"
COMMENTS: This mold makes a very pretty soap. Fairly easy removal and the scores make it easy to cut.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Makes a very pretty soap
Tabitha • Pennsylvania
Date Submitted: 05/26/2014
I Recommend This Product!
"Nice Looking bars."
COMMENTS: This mold makes a very nice bar, I will be looking for more like it soon.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Better than single bar molds.
Linda • North Carolina
Date Submitted: 04/17/2014
I Recommend This Product!
"Had to have another of these"
COMMENTS: I already had one of these molds and just had to have another one. I like using it with ocean scented and nautical soaps. It makes a very pretty design and looks like waves or swirling water to me. I'm a Milky Way mold fan so I highly recommend this mold.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Beautiful design • Easy to clean • Easy to use
Deborah • North Carolina
Date Submitted: 04/17/2014
I Recommend This Product!
"Cute swirls"
COMMENTS: I love the design of this mold, but for some reason I can't seem to get consistently even bars with my cold process soap. I'm sure it's user error, or I'm pouring too thick. The next time I use it I'm going to try it at a very thin trace, or maybe try it with some melt and pour. Be sure to get all the air bubbles out by tapping gently on a flat surface. The good thing is the mold is clear so you can look under it to see if any are remaining.
PRODUCT USED IN: Soap - Cold Process
P.O. Box 40 • California
Date Submitted: 11/30/2013
I Recommend This Product!
"love it!"
COMMENTS: Awesome! worked great for cp soap. next time I'll add some color to make it pop more
PRODUCT USED IN: Soap - Cold Process
Amanda • California
Date Submitted: 11/23/2013
I Recommend This Product!
"Excellent"
COMMENTS: I made some vintage inspired yellow green and turquoise soaps in this mold that turned out awesome! I posted them on my facebook and they sold out before I could even list them in my store. Definitely use a lot of rubbing alcohol after filling in the details and freeze then hot water to unmold. Really nice results!
PRODUCT USED IN: Soap - Melt & Pour
Terri • Texas
Date Submitted: 11/10/2013
I Recommend This Product!
"Arabesque Soap Mold"
COMMENTS: I made a melt and pour layered soap with this mold. The first layer plain white coconut milk soap, then I made white soap curls and layered on top of the white soap filling the rest of the mold with clear soap base while layering more soap curls. I scented the batch with White Tea and Ginger f/o, my favorite BBW the scent is dead on!! Beautiful bars and the scent is fantastic!! Ease of use, great, professional bar of soap, and the price cannot be beat!!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• everything
Show more
Customer Photos
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Molds By Material
Retired Soap Molds
See customer photos
Product Details 
Have more questions? See Q&A
Recipes & Videos (0)
Questions & Answers (4)
Customer Reviews (23)
Customer Photos
Charts & Calculators
