Milky Way™ Assorted 4 in 1 Soap Mold (MW 40) - Wholesale Supplies Plus
Current Processing Times: 1-2 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Basic - Smooth Designs - (You Are Here - P9741)

Milky Way™ Assorted 4 in 1 Soap Mold (MW 40)


Additional Information
For classic soap shapes, you can't go wrong with the 4-in-one soap mold. Included are oval, round, square and rectangle shapes.

Milky Way® Molds are constructed of plastic and have angled sides for easier soap removal. The dimensions listed are for the largest sides. The bottom of each cavity will be slightly smaller than the dimensions listed.

Common Uses:
Melt & Pour Soap. Cold Process Soap.

Points of Interest:
Square Bar Dimensions: 2.25” x 2.25” x 1”
Rectangle Bar Dimensions: 3.25” x 2.5” x 1”
Oval Bar Dimensions: 3.75” x 2.25” x 1”

Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 3.75 oz Bar Cavities: 4
Bar Depth: 3.75" Bar Length: 3.25"
Bar Width: 2.5" Max Temperature: 145ºF
Mold Capacity (oz): 15

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (2)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 2 Question(s) Shown Below

Q Bubble
Posted By: Andrea   |   October 19, 2015

"Are these plastic or silicone?"

Q Bubble
Posted By: Carlotta   |   May 07, 2014

"Can you list the dimensions of each mold? I need to know if they will fit in the clamshells I have."

Recipes & Videos (0)
CustomerReviews (10)
Submit A Rating Average Customer Rating: (10 Reviews)

annmarie • Massachusetts

Date Submitted:  07/19/2017

I Recommend This Product!
"great product"
COMMENTS:  easy to use, i like the different shapes
PRODUCT USED IN:   Soap - Melt & Pour
Briony  • New York

Date Submitted:  01/01/2017

I Recommend This Product!
"Great mold"
COMMENTS:  I find myself using this mold for many things. Love that there's 4 different shapes.
PRODUCT USED IN:   Soap - Melt & Pour, Exfoliants & Sugar Scrubs, Lotion Bars & Sticks
Lekesha  • South Carolina

Date Submitted:  12/27/2016

I Recommend This Product!
"perfect size"
COMMENTS:  Although I have found that I prefer the silicon molds, this one has come in very handy. The size of the bars are perfect & they are not difficult to unmold, (though not as easy as the silicon molds). I would purchase again.
PRODUCT USED IN:   Soap - Melt & Pour
April • Minnesota

Date Submitted:  12/25/2016

I Recommend This Product!
"Great starter mold!"
COMMENTS:  My 13-year-old was interested in beginning her own soaping hobby, so when she asked for soap supplies for her birthday, this was the first mold I bought her. It's perfect for a beginner, nice and sturdy, enabling her to experiment and become familiar with all the basic shapes and techniques.
PRODUCT USED IN:   Soap - Melt & Pour
Dale • South Carolina

Date Submitted:  10/13/2016

I Recommend This Product!
COMMENTS:  the best
PRODUCT USED IN:   Soap - Melt & Pour
Jennifer • Ohio

Date Submitted:  04/15/2016

I Recommend This Product!
COMMENTS:  This is my go to mold for simple shaped bars. I have a couple of these and I find myself using them a lot. Great quality!
PRODUCT USED IN:   Soap - Melt & Pour
• fantastic quality
Laura • Florida

Date Submitted:  08/21/2014

I Recommend This Product!
"Easy to use"
COMMENTS:  The soap hardens fast, it's easy unmolding, beautiful shapes and it gives me shiny soaps.
PRODUCT USED IN:   Soap - Cold Process
• Easy unmolding
• Easy to clean
• Great for a prove
Shari B • Tennessee

Date Submitted:  07/30/2014

I Recommend This Product!
"Soap Mold"
COMMENTS:  This is a great mold. Soap comes right not and makes smooth, shiny bars of soap.
PRODUCT USED IN:   Soap - Melt & Pour
• Ease of use
• Easy release
Brandi • Texas

Date Submitted:  03/16/2014

I Recommend This Product!
"Good variety of shapes"
COMMENTS:  I bought this mold for the variety of shapes it offers. This is a nice quality plastic mold. The inside edge of each cavity is curved, so this mold will not produce sharp edges on the tops of your soaps.
PRODUCT USED IN:   Soap - Melt & Pour
• Shapes of cavities
• Sizes of cavities
• Durable
• Make available in silicone
Judy • Illinois

Date Submitted:  02/13/2014

I Recommend This Product!
"Great Basic Bar Shapes"
COMMENTS:  For anyone just starting out, this is a great basic soap mold to begin your M & P adventures with.
PRODUCT USED IN:   Soap - Melt & Pour
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved