Visit Us – Pick Up Orders Save 10% (Read More)
Lead Times 1-3 Business Days FREE SHIPPING ~ On Orders Over $25*
 
 
Wholesale Supplies Plus
0
 
   
 
 
 
Molds All Molds Baby & Young Kids - (You Are Here - P7140)

Milky Way™ Baby Bootie Soap Mold (MW 507)

Pricing
$9.56 for 1 Mold
$41.25 for 5 Mold
$95.95 for 20 Mold
$385.70 for 150 Mold



Additional Information
Craft cute baby bootie soaps as a baby shower favor or as a gift for an expecting mother. Color the bow pink, blue or yellow to fit the occasion. These could also be favors at a reveal party.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 4.3 oz Bar Cavities: 3
Bar Depth: 1 1/2" Bar Length: 3 3/4"
Bar Width: 2 3/4" Max Temperature: 135
Mold Capacity (oz): 12



This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (2)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 2 Question(s) Shown Below



Q Bubble
Posted By: kimbelry   |   November 15, 2017

"Im wanting to purchase the MW baby bootie soap mold and the MW baby bottle soap mold however I plan to use them for gender reveal bath bomb party favors. Which shrink wrap bag or band do you recommend?"




Q Bubble
Posted By: Home   |   October 29, 2015

"I have been trying to make the shoe laces a different color from the bootie w/melt & pour soap, but it doesn't stick or bleeds into the white soap. Is there any pointers on how to do this?"


Recipes & Videos (0)
CustomerReviews (12)
Submit A Rating Average Customer Rating: (12 Reviews)



ELIZE • New Jersey

Date Submitted:  04/07/2018

I Recommend This Product!
"VERY CUTE!"
COMMENTS:  Baby Bootie Soap Mold is so cute...love it! I'm going to try to use them for bath fizzies.The size is perfect. I'm very satisfied with this purchase. I'm also planning to use it as a soap mold.
PRODUCT USED IN:   Soap - Cold Process, Bath Fizzies & Salts
Christina • Ohio

Date Submitted:  05/10/2017

I Recommend This Product!
"Cute booties!"
COMMENTS:  So I wanted this mold so badly for a gender reveal bath bomb. Wasn't sure how it would do but guess what it turned out great.
PRODUCT USED IN:   Bath Fizzies & Salts
ROMANA • New York

Date Submitted:  04/04/2017

I Recommend This Product!
"BABY BOOTIE SOAP MOLD"
COMMENTS:  IT LOOKS BETTER THAN ON THE PICTURE
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Ludene L • Wisconsin

Date Submitted:  03/03/2017

I Recommend This Product!
"R"
COMMENTS:  Since submitting an earlier review I have discovered a few things that make using it even better or at least easier. Chilling the mold in the freezer for about 15 minutes and then setting it in hot water for about 3 results in the soaps popping right out. The hot water was a suggestion in an earlier review and for me makes all the difference. No more fear of cracking the mold. I have also tried painting the bow with mica mixed with alcohol. It adds a nice touch and looks great. Less room for error than trying to pour the color into the bow.
PRODUCT USED IN:   Soap - Melt & Pour
KellyAnn • Pennsylvania

Date Submitted:  01/16/2016

I Recommend This Product!
"Nice"
COMMENTS:  Makes an adorable 4oz bar of soap. Waited 24 hours to unmold and it popped right out.
PRODUCT USED IN:   Soap - Melt & Pour
CarolAnn • New Mexico

Date Submitted:  08/11/2015

I Recommend This Product!
"Baby Bootie Mold 182"
COMMENTS:  Very cute mold. We color the tie part a blue, pink or yellow as we need and the rest white. We use Baby Powder scent. They sell like crazy at craft fairs and people order these ahead of time to make sure they get what they need. Mold is easy to unmold, just pops right out and washing is just warm water. The bar is full size.
PRODUCT USED IN:   Soap - Cold Process, Soap - Shampoo Bars, Bath Fizzies & Salts, Exfoliants & Sugar Scrubs, Lotion Bars & Sticks
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Makes cute soaps and bars.
• Unmolds and washes easily.
michelle  • Michigan

Date Submitted:  05/05/2015

I Recommend This Product!
"Very Cute Mold"
COMMENTS:  I really like this mold (a little flimsy thou). Cute Soap results.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Super Cute
• Nice Size
• heavier plastic
Tammy • North Carolina

Date Submitted:  09/08/2014

I Recommend This Product!
"Great quality"
COMMENTS:  Love, love this mold. Have used it twice now. Great for gifts of new moms!
PRODUCT USED IN:   Soap - Melt & Pour
patricia lavaique • Pennsylvania

Date Submitted:  07/31/2014

I Recommend This Product!
"very cute!"
COMMENTS:  I used this mold for baby shower favors...took some time to get used to using plastic mold...but learned to apply a tiny bit of glycerin around the edges before putting in the freezer for 15 minutes and dip bottom in hot water for a few minutes.....made 30 soaps!........Trish
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• makes a cute gift item
• sturdier plastic
Dorene  • Georgia

Date Submitted:  11/17/2013

I Recommend This Product!
"Beautiful Mold "
COMMENTS:  This made the cutest baby bootie for shower. Details were deep enough for multiple pours, super cute!
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Details
• Nice size
• Make pastic stronger
victoria • Texas

Date Submitted:  09/23/2013

I Recommend This Product!
"Excellent"
COMMENTS:  Good detail, put in freezer after it set--easy release
PRODUCT USED IN:   Soap - Cold Process
Jessica • Washington

Date Submitted:  01/18/2011

I Recommend This Product!
"Beautiful mold!"
COMMENTS:  This one is a little tricky to use (I color the top laces and front laces separately, then add the white), but it makes a very cute and original soap. Found the plastic to be a little flimsier than others, like Footprints, but I'd definitely buy another if this one gives out.
PRODUCT USED IN:  Bath Products
Customer Photos (0)
Charts & Calculators
 
 
Stay updated on sales, new products, free recipes, and more.
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Adding To An Order
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Site Feedback

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2019 Wholesale Supplies Plus, LLC - All Rights Reserved