We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Bamboo symbols are often found in Chinese, Japanese and Indian culture to represent luck, longevity, strength, and friendship. The beautiful Bamboo Soap Mold features bamboo stems and leaves set in a peaceful, Zen-like window setting.
Common Uses:
Melt & Pour Soap. Cold Process Soap.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
Helpful Product Information:
Material: Plastic
Style: Bar
Avg. Bar Weight: 4.25 oz
Bar Cavities: 3
Bar Depth: 0.875"
Bar Length: 3.5"
Bar Width: 2.375"
Max Temperature: 145ºF
Mold Capacity (oz): 12.78
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: The soaps I made from this mold (with Fresh Cut Grass fragrance) were the first gone from the Christmas tray I made for the angelic doctors and nurses at my son's cancer-treatment center. They turned out amazing, with clear detail, and were very easy to unmold. I would definitely recommend!
PRODUCT USED IN: Soap - Cold Process
Julie • Wisconsin
Date Submitted: 12/12/2016
I Recommend This Product!
"One of my favorites"
COMMENTS: I love this mold, it is very easy to use. It is super easy to un mold it.Also super easy to clean :)es only a few seconds to un mold it. It is also easy to clean :)
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Everything !!
• nothing
Judith • Pennsylvania
Date Submitted: 10/26/2016
I Recommend This Product!
"Bamboo Mold"
COMMENTS: This mold makes a beautiful Bath Bar. Love it
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Mary • Ohio
Date Submitted: 06/23/2016
I Recommend This Product!
"Makes a lovely bar"
COMMENTS: This makes a nice bar. Good for small gift bars.
PRODUCT USED IN: Soap - Melt & Pour
Mary • California
Date Submitted: 03/05/2016
I Recommend This Product!
"Milky Way™ Bamboo Soap Mold (MW 57)"
COMMENTS: Looked beautiful with the lotus bamboo fragrance and Matte brown coloring.
PRODUCT USED IN: Soap - Melt & Pour
Sandra Lee • North Carolina
Date Submitted: 11/27/2015
I Recommend This Product!
"Beautiful details "
COMMENTS: The soap I've made with this mold has been a customer favorite. I've done a two toned effect with m&p and they were quite lovely.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Beautiful detailing • Easy to use • Easy to clean
Rachelle • Colorado
Date Submitted: 09/21/2015
I Recommend This Product!
"Pretty detail"
COMMENTS: This bar has an interesting look overall. Nice detail. It comes out of the mold easily. I bought it to make CP with a bamboo sugarcane FO. It is still curing so I don't know how well I will like the fragrance, but the mold is very pretty.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• ddesign
Agnes • New York
Date Submitted: 09/19/2015
I Recommend This Product!
"Very nice mold"
COMMENTS: Nice mold that make a very pretty bar. I like to use it with Bamboo Lotus fragrance.
PRODUCT USED IN: Soap - Melt & Pour
Cynthia • California
Date Submitted: 08/17/2015
I Recommend This Product!
"Aesthetically appealing! "
COMMENTS: I really love this design. I used MP soap and plastic droppers. First, I sprayed with RA and used the droppers to add green MP to bamboo shoots and edging, let it dry then sprayed again and added the background soap in a beige/brown color. This goes well with any "green type" of fragrance. I used "Bamboo Hemp", which worked out wonderfully. The colors were very complimentary. As expected, plastic molds are handled differently than silicone molds.I find it helpful to make sure you add your MP base all the way to the top edge. Once the soap has hardened I make an air pocket on one side which makes it easier to pop out. It makes a very beautiful soap.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Design • Detail • Artistically appealing
Lynne • New Mexico
Date Submitted: 08/07/2015
I Recommend This Product!
"Nice"
COMMENTS: I like this mold, it has nice detailing and it goes well with my Asian themes soaps.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• detailing
• finished bare not thick enough
Sharon • Nevada
Date Submitted: 01/04/2015
I Recommend This Product!
"Bamboo Soap Mold"
COMMENTS: This plastic soap mold has a wonderful design. MP soap was a little difficult to get out of the mold due to the hard plastic (this is common), but when it released the soap was intricately beautiful. I try to get molds to match my scented soaps. This one was scented with WSP Crafter's Choice Bamboo Lotus. I plan to use this mold many more times for instant eye appeal. I have never purchased a mold from WSP that didn't release. Plastic molds are always a little more difficult for soap to release, but it's worth the extra effort.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Designs that match scents • Intricate beauty
• Making molds from silicone
Leah • Kentucky
Date Submitted: 12/30/2014
I Recommend This Product!
"Wonderful!"
COMMENTS: This is a thick plastic so don't expect this to be silicone or anything of amazing quality, but for the price this mold is excellent. I just popped out my 3rd batch of M&P soap from this mold with no issues at all. I typically just warm the bars slightly with my hands while still in the mold then push them out with my thumbs. No issues at all. It would probably be easier to dip in warm water but I have never had any issues. If you want to pay the price for silicone, go for it, but if you are looking for an inexpensive mold with a wonderful design, this one is perfect!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Price • Cute, crisp design
Elizabeth • Alabama
Date Submitted: 04/09/2014
I Recommend This Product!
"Lovely looking soap!"
COMMENTS: I love this mold, it makes such lovely looking soaps. I like to use the Bamboo Lotus fragrance oil with my soaps whenever I use this mold as they go hand in hand! I don't have too much trouble getting my soap out of the mold either.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Great detail!
Kathryn • New Hampshire
Date Submitted: 03/30/2014
I Recommend This Product!
"Bamboo Soap Mold"
COMMENTS: I've used this mold over and over again. It's such a lovely look for a bar of soap . . . I put it in a cello bag rather than wrapping it so that the detail can be seen. It's been very popular with my customers.
PRODUCT USED IN: Soap - Melt & Pour
Judy • Illinois
Date Submitted: 02/13/2014
I Recommend This Product!
"Everyone loves this mold"
COMMENTS: So attractive - everyone loves it!
PRODUCT USED IN: Soap - Melt & Pour
Bobette • Nevada
Date Submitted: 02/08/2014
I Recommend This Product!
"elegant design"
COMMENTS: This mold is physically sturdy with a delicate design. Soaps release easily and the pattern is sharp and clear. A favorite!
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Retired Soap Molds
