We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Long before they depended on modern beehives to collect honey, beekeepers relied on skeps. These carefully designed woven baskets were often given as wedding present, along with a swarm of bees! The Bee Skep Soap Mold features a richly detailed basket and two hard-working bees. Perfect for garden soap or a summer gift basket.
Common Uses:
Melt & Pour Soap. Cold Process Soap.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
Helpful Product Information:
Material: Plastic
Style: Bar
Avg. Bar Weight: 5.5 oz
Bar Cavities: 3
Bar Depth: 1.625"
Bar Length: 3.25"
Bar Width: 2.75
Max Temperature: 145ºF
Mold Capacity (oz): 16.5
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: This soap mold is great and very good quality. It is very sturdy and the cavities are nice and deep, which allow for all the bees and flowers to be pronounced and visible on the finished bar even if you do not paint them with micas (included with the kit). Nice larger size bar.
PRODUCT USED IN: Soap - Melt & Pour
Agnes • New York
Date Submitted: 09/19/2015
I Recommend This Product!
"Fun Mold"
COMMENTS: Makes a fun shaped soap. A little harder to unmold that other milky way mold but worth the effort.
PRODUCT USED IN: Soap - Melt & Pour
CarolAnn • New Mexico
Date Submitted: 09/01/2015
I Recommend This Product!
"Bee Skep Soap Mold 60"
COMMENTS: Cute as a bug. Makes 3 full size bars. The bars just pop right out. Washing is just warm water. Everyone loves this mold. Try it with your honey soaps. Very cute.
• Cute design. • Ease of use, cleaning and unmolding.
Shannon • California
Date Submitted: 04/12/2015
I Recommend This Product!
"Used for melt 'n' pour & COLD PROCESS"
COMMENTS: I used this for both melt and pour as well as cold process soaps. Both came out pretty easily. I think this is such a cute mold and great for those soaps that have honey added to them.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Chanda • Missouri
Date Submitted: 09/06/2014
I Recommend This Product!
"an adoreable mold!!"
COMMENTS: I love honey scents,&this is the cutest choice for a mold.This is also a very sturdy mold
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Molds By Material
Retired Soap Molds
