Visit Us – Pick Up Orders Save 10% (Read More)
Lead Times 1-3 Business Days FREE SHIPPING ~ On Orders Over $25*
 
 
Wholesale Supplies Plus
0
 
   
 
 
 
Molds All Molds Baby & Young Kids - (You Are Here - P9985)

Milky Way™ Bicycle Soap Mold (MW 53)

Pricing
$9.56 for 1 Mold
$41.25 for 5 Mold
$95.95 for 20 Mold
$385.70 for 150 Mold



Additional Information
You can practically feel the wind in your hair with the carved Bicycle Soap Mold. Perfect for cleaning up after a long bike ride with family and friends.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 4.25 oz Bar Cavities: 3
Bar Depth: 1" Bar Length: 3.5"
Bar Width: 2.25" Max Temperature: 145ºF
Mold Capacity (oz): 12.75



This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (2)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 2 Question(s) Shown Below



Q Bubble
Posted By: Brenda   |   February 01, 2014

"What are the dimensions on the finished soap?"




Q Bubble
Posted By: Annie   |   January 20, 2014

"What is this mold made out of? Is it flexible?"


Recipes & Videos (1)
CustomerReviews (12)
Submit A Rating Average Customer Rating: (12 Reviews)



Lara • Georgia

Date Submitted:  09/06/2019

I Recommend This Product!
"Detailed Soaps"
COMMENTS:  This mold made some wonderful detailed hot process soaps for my business. People compliment them by saying how cute the soaps are! Thank you!
PRODUCT USED IN:   Soap - Hot Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Easy to use and clean
• Nothing!
Amanda • Michigan

Date Submitted:  06/07/2019

I Recommend This Product!
"SO CUTE"
COMMENTS:  I bought this to make a summer design or my Sweet Strawberry soap. Makes them look really cute! Mold works great, lots of possibilities. Seems sturdy.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Cute
• Easy to use
Karen • Washington

Date Submitted:  02/06/2018

I Recommend This Product!
"LOVE THIS MOLD!"
COMMENTS:  I think I own each and every mold MILKY WAY makes. I love the size of the bars as well as the great details in each style. Ease of de-molding is great if you allow them to cool in the mold. If you are inpatient like me, you can easily speed up the process by putting the mold in the refrigerator for about 15 - 20 minutes. The perfect design for people who ride bikes, no matter what their age.
PRODUCT USED IN:   Soap - Melt & Pour
Lucinda  • Indiana

Date Submitted:  04/28/2017

I Recommend This Product!
"Specialty soap"
COMMENTS:  I bought this mold just to make soap for my daughter who loves biking. I know she'll love it as well as many of my customers.
PRODUCT USED IN:   Soap - Cold Process
ERIKA • Florida

Date Submitted:  02/07/2017

I Recommend This Product!
"Nice design"
COMMENTS:  Nice design, unisex
PRODUCT USED IN:   Soap - Melt & Pour
nancy • Arizona

Date Submitted:  01/03/2017

I Recommend This Product!
"Bicycle Mold"
COMMENTS:  People love this mold especially for those bicyclist enthusiastics
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Design
• Nothing
Diane • Missouri

Date Submitted:  09/29/2016

"Not so great."
COMMENTS:  Never works for me.
PRODUCT USED IN:   Soap - Melt & Pour
anabanana • California

Date Submitted:  08/10/2016

I Recommend This Product!
"LOVE, LOVE, LOVE"
COMMENTS:  We are avid cyclists, so this mold was an obvious choice. I love the molds I purchased! You must put your soap into the freezer after 24 hours of curing to get the soap out without disfiguring the shape. I suggest at least 15 minutes. For soft oil soaps, I suggest not much more time than the 15 minutes otherwise, you get the soap out but face the same possibility of disfiguring the soap due to the added "moisture" of the freezer and the softness of the oils used in CP.
PRODUCT USED IN:   Soap - Cold Process
Marissa • Wisconsin

Date Submitted:  07/18/2016

I Recommend This Product!
"Nice mold"
COMMENTS:  This is a super cute mold and I love the way the soap comes out, although after only a few uses the plastic mold gets a little messed up from releasing your soaps from the mold. I'd love if this came in a silicone mold.
PRODUCT USED IN:   Soap - Melt & Pour
Stephanie • Utah

Date Submitted:  02/14/2016

I Recommend This Product!
"Perfect for those of us who bike"
COMMENTS:  This mold is so perfect for the products I make for my boys. They all love to bike and the soaps and lotion bars that I give them from this mold make them feel special. I read a few reviews talking about ways to get the molds to easily release and here's what has worked for me; I spray a small amount of cooking spray into the cavity and really rub it into the small spaces of the spokes and seat before I pour the CP soap. Then after 24 hours I pop the mold with the soaps into the freezer for about 30 minutes. With gentle pressure they come right out, super crisp. It's my favorite mold.
PRODUCT USED IN:   Soap - Cold Process, Lotion Bars & Sticks
Shannon • California

Date Submitted:  04/12/2015

I Recommend This Product!
"Very cute!"
COMMENTS:  Very cute and fun. I'm happy I added this to my collection.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• chic
Hayna • New York

Date Submitted:  04/05/2014

I Recommend This Product!
"Great size, fun graphic"
COMMENTS:  This mold has been a great addition to my soap and lotion making. The image comes out clean and soap and lotion release easily.
PRODUCT USED IN:   Lotion Bars & Sticks
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Four cavities instead of three
Customer Photos (1)
Charts & Calculators
 
 
Stay updated on sales, new products, free recipes, and more.
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Adding To An Order
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Site Feedback

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2019 Wholesale Supplies Plus, LLC - All Rights Reserved