We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
The Body Bar Rectangle Silicone Mold is the perfect sized bar to use in the shower. The 7 oz rounded rectangle has smooth edges that fit perfectly in the hand. This Silicone mold has four lipped cavities that allow the rounded edges to be easily poured. Personalize this body bar by using a soap stamp!
Common Uses:
Melt & Pour Soap (MP). Cold Process Soap (CP). Cold Process Oven Process Soap (CPOP). Hot Process Soap (HP). Lotion Bars.
Points of Interest:
Maximum Temperature: 500ºF
Manufacturer: Crafter’s Choice®
Material: Silicone
Country of Origin: China
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, place in freezer for 45-60 mins then gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: I bought 2 of these molds for melt and pour soaps and fell in love!! I wanted to have a bigger bar of soap, because a lot of companies don’t sell big body bars like these, and I like that it will last longer than the smaller bar. After making my first couple of batches, I ordered about 6 more when I saw they were on sale. Super easy to unmold soap from also. If you make melt and pour and are looking for a larger than normal soap size, this is a winner!!
PRODUCT USED IN: Soap - Melt & Pour
Terri • Missouri
Date Submitted: 08/13/2021
I Recommend This Product!
"Excellent mold!"
COMMENTS: This mold is perfect for my hot process herb soaps. Nice shape and size
PRODUCT USED IN: Soap - Hot Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Size • Shape • Function
• None
Casita • Texas
Date Submitted: 08/12/2019
"Should’ve Heeded Previous Review "
COMMENTS: Review #1 of 2:
Day a Reaction: The lipped edges on this mold ruin the soap when unmolding.
Disclaimer: Recipe is 72% Hard Oils, 28% Soft Oils. I tried unmolding just now - after the soap (CPOP) sat in the oven undisturbed for 32 hours - and the bar I unmolded was ruined. I can always unmold this same recipe in as little as 8-12 hours with the Euro Rectangle (15 Bar) Mold.
I will post another review when I’m finally able to successfully unmold, hopefully. I love Crafters Choice molds and I must say I’m highly disappointed in this one thus far. I’d understand if this was a soft recipe but it’s not. If it takes longer than 2 days, I’ll have to find different molds and now I know to avoid those with “lipped edges”. And of course I eagerly bought 5 of them just knowing they’d be great! Sigh.
PRODUCT USED IN: Soap - CPOP
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• LOSE THE LIPPED EDGE, PLEASE!
Karen • Texas
Date Submitted: 06/17/2019
I Recommend This Product!
"#1621 Rectangle Body Bar Silicone mold"
COMMENTS: WOW! Just upgraded my soaps in a big way! So very easy to use (be sure to set them on a cookie sheet or something so you can move them after the pour - if you need them out of the way). Every single bar came out so easily, perfect and the size is perfect too. Some customers said they were too big but liked the idea of cutting them in half and bought them w/ the idea they were getting almost two full bars for the price of one. Have come up with great new designs that i couldn't do as easily with other molds. Love these and am ordering more now. Yes, 7 oz bars ups the price and uses more of our soap faster but they look so very nice, are so easy to use and sell so well - just no down side to this mold. Beautifully shaped bars, no cutting, plane - ing/scraping, no potato peeler needed for the edges, just perfection. Thanks WSP!
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• makes beautiful soaps
• more bars per mold set
Alisha • Texas
Date Submitted: 02/21/2019
I Recommend This Product!
"Love the shape "
COMMENTS: I used this on CP and even though the soap easily unmolded, the lipped edges dragged against the soap. I had to clean up the sides which then changed the shape, eliminating the rounded edges. For this to work on CP, the soap has to really dry out because when you unmold the soap, gravity combined with the lipped edges will press against the soap. The shape is nice and the soap fit perfectly in my hand but I think this is better for M&P.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Retired Soap Molds
