We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
The Bumblebee Soap Mold is shaped like a resting bumblebee. Use this mold to create soaps or lotion bars that we recommend pairing with honey scented fragrance oils!
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
Helpful Product Information:
Material: Plastic
Style: Bar
Avg. Bar Weight: 4
Bar Cavities: 3
Bar Depth: 1 1/8"
Bar Length: 3 7/8"
Bar Width: 3"
Max Temperature: 135ºF
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: I really like this mold and my customers comment all the time about how cute they are. I use them for my Honey & Beeswax CP Soap. I use sodium silicate in the batter and pop them in the fridge after a few days of sitting in the molds. The soaps came right out.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• They're unique. Make a good size bar.
• I always prefer silicone molds.
Kelly • California
Date Submitted: 06/22/2019
"Flimsy"
COMMENTS: Love the bee molds in general. This mold was flimsy. When gently pushing out the bee, the mold cracked along the edge of the cavity. Used tons of molds from MW and this has never happened in 100s of removals.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Good size for hands
• Better Quality • Better Price
alma • Virginia
Date Submitted: 11/21/2018
I Recommend This Product!
"soap mold"
COMMENTS: i use this mold for bath bombs and it comes out so cute. together with the honey powder and honey fragrance oil this is a winner.
PRODUCT USED IN: Bath Fizzies & Salts
Kelly • Virginia
Date Submitted: 12/23/2016
I Recommend This Product!
"Bee Mold"
COMMENTS: perfect... I love this mold, use it for my honey soap line.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
If you used this product to create a masterpiece of your own, please share your ideas with others. Uploaded products can link directly to your Handmade Store so customers can purchase directly!