Wilton™ Cake Pop Silicone Mold - Wholesale Supplies Plus
 
Current Processing Times: 1-2 Business Days
 
 
Wholesale Supplies Plus
 
   
 
 
 
Soap Molds Plastic & Silicone Molds Food & Bakery - (You Are Here - P9146)

Wilton™ Cake Pop Silicone Mold

Pricing






Additional Information
Make small soaps or bath fizzies in the Wilton Cake Pops Silicone Mold. This simple and fun oval shape can be used to make soap in the shape of eggs, candy corn, acorns, or truffles.

Material: Food Grade Silicone
Maximum Product Pour Temp: 500ºF
Makes (8) 1.45 ounce bars
Dimensions: 1.5" x 1.5"



Country Of Origin: China

Helpful Product Information:
Style: Bar Avg. Bar Weight: 1.45 oz
Bar Cavities: 8 Bar Depth: 1.5"
Bar Length: 1.5" Bar Width: 1.5"
Max Temperature: 500ºF Mold Capacity (oz): 11.6

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.

Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.

Care:
Hand wash in warm sudsy water.
SDS & Documents
Questions & Answers (0)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 0 Question(s) Shown Below

Recipes & Videos (7)
CustomerReviews (13)
Submit A Rating Average Customer Rating: (13 Reviews)



Ludmela • Maryland

Date Submitted:  04/07/2018

I Recommend This Product!
"Pop Sticks"
COMMENTS:  I was excited to get this mold and it worked out really well.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Cheryl • South Carolina

Date Submitted:  09/05/2017

I Recommend This Product!
"Had to buy some more because of demand"
COMMENTS:  Made the Ginger Bread Snow Globes for the first time today. They turned out so cute. Only had one mold so I ordered another one and more little ginger bread men. Can't wait to try other ideas I have for this mold.
PRODUCT USED IN:   Soap - Melt & Pour
Joan  • Nevada

Date Submitted:  02/08/2016

I Recommend This Product!
"mold"
COMMENTS:  Like this mold as it is easy to take product out, would buy again
PRODUCT USED IN:   Exfoliants & Sugar Scrubs
Jennifer • New York

Date Submitted:  12/04/2015

I Recommend This Product!
"Easy to remove "
COMMENTS:  These are a great way to make a small product. The flexible silicone is great. Thanks.
PRODUCT USED IN:   Soap - Melt & Pour, Bath Fizzies & Salts, Exfoliants & Sugar Scrubs
Carrie • Florida

Date Submitted:  02/12/2015

I Recommend This Product!
"I love this for making truffles!"
COMMENTS:  This is a great mold for making M&P chocolate truffles. Sturdy too. I don't fill all the way up to make them but it is just great!
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Great "candy" mold
• Heavy Duty
• Price
• More Cavities
Ashley • New York

Date Submitted:  10/29/2014

I Recommend This Product!
"AWESOME"
COMMENTS:  It is thick so it doesnt rip apart. It releases the scrubs so easily, and doesnt hold fragrance which is a plus.
PRODUCT USED IN:   Exfoliants & Sugar Scrubs
Casey • New Mexico

Date Submitted:  10/13/2014

I Recommend This Product!
"Perfect mold for the Snow Globe Soaps"
COMMENTS:  I bought this for my 11 year old to make the Gingerbread Snow Globe project and now think he will make Bath Bomb Pops with it also. Its perfect!
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• flexible and easy to work with
• many uses
• no strange odors
• I wish it had 12 cavities instead of 8
Linda  • North Carolina

Date Submitted:  04/16/2014

I Recommend This Product!
"Basic must have mold"
COMMENTS:  I will have to have more of these molds. It is used in a number of recipes so this mold will be used SO much. I've used it for the Lavender rose bath fizzies and it was so easy to use. This is a sturdy and high quality mold so it should last.
PRODUCT USED IN:   Soap - Melt & Pour, Bath Fizzies & Salts
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Used for so many products
• High quality and sturdy
• Easy to use
Jen • Georgia

Date Submitted:  03/11/2014

I Recommend This Product!
"Great"
COMMENTS:  It is very easy to use.
PRODUCT USED IN:   Soap - Melt & Pour
Katy  • North Carolina

Date Submitted:  02/22/2014

I Recommend This Product!
"easter egg soaps came out great!"
COMMENTS:  this is a fun mold for all holiday soaps, and since its wilton the quality is great.
PRODUCT USED IN:   Soap - Melt & Pour
Judy • Illinois

Date Submitted:  02/13/2014

I Recommend This Product!
"Used this mold for chocolate "candies""
COMMENTS:  Perfect silicone mold for making soap "candies" - silicone makes for quick release!
PRODUCT USED IN:   Soap - Melt & Pour
Christian  • Texas

Date Submitted:  01/23/2014

I Recommend This Product!
"perfect size for samples"
COMMENTS:  I purchased this mold to make chocolate soap truffles and I'm so glad that I did. I didn't have problems getting the soap to release from the mold. I put the mold in the freezer and also just let the mold cool overnight. Both times, the soap popped right out and the mold didn't crack. If you're looking to make soap that looks like candy, I'd recommend just filling the cavities halfway. Otherwise, you wind up with more of an egg shape. The cavity is also great for testing out fragrances or colors.
PRODUCT USED IN:   Soap - Melt & Pour
Pamela • Florida

Date Submitted:  11/13/2013

I Recommend This Product!
"Excellent"
COMMENTS:  I love this mold. I used it in the Lavender and Rose Bath Fizz and it worked perfectly and I want to use it in my mp soap next. I love the size. It is perfect
PRODUCT USED IN:   Bath Fizzies & Salts
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• thick and sturdy for a silicone mold
• perfect size
• nothing
Customer Photos (0)
Charts & Calculators
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Careers/Job Openings

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved