We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
The use of knots in Celtic art highlights the Celts’ belief in the interconnectedness of life and eternity. Combined with traditional shamrocks, the Celtic Clover Soap Mold adds a touch of the Irish to your handmade soap.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
Helpful Product Information:
Material: Plastic
Style: Bar
Avg. Bar Weight: 4.75 oz
Bar Cavities: 3
Bar Depth: 1"
Bar Diameter: 2.75
Bar Length: 2.75"
Bar Width: 2.75"
Max Temperature: 145ºF
Mold Capacity (oz): 14.25
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: I purchased this mold to use for my essential oil soaps. Before I used a handmade mold that worked but, just didn't give me the professional look I wanted. This can be a tough business sometimes and you need little things like this mold to help your business stand out. *Make sure to use sodium lactate unless your recipe produces a hard bar.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Detail of the mold • No cutting • No lining
Jamie • Arizona
Date Submitted: 08/30/2017
I Recommend This Product!
"Celtic Clover Soap Mold (MW 64)"
COMMENTS: Love this mold! The details are beautiful and I will be getting a couple more of them. MP soap sets up quickly in them and I had no issue popping them out of the mold once the seal was broken. Using 12 oz. of MP will give you 3 bars at 4 oz ea.
PRODUCT USED IN: Soap - Melt & Pour
Edna-Mae • North Carolina
Date Submitted: 05/30/2016
I Recommend This Product!
"What an awesome design!"
COMMENTS: I love the finished look of my soaps with this mold! I use a white over-pour for this design and it looks amazing. The detail is great!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• The intricate details in the design • The separate compartments
Theresa • Tennessee
Date Submitted: 03/31/2016
I Recommend This Product!
"Makes Great Scottish gifts"
COMMENTS: These make great gifts for anyone doing genealog with Scottish ancestors.
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Retired Soap Molds
