Crafter's Choice™ Circle Mini Column Silicone Soap Mold 2016 - Wholesale Supplies Plus
Current Processing Times: 3-4 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Basic - Smooth Designs - (You Are Here - P10300)

Crafter's Choice™ Circle Mini Column Silicone Soap Mold 2016


Additional Information
Create a couple mini circle soap columns from this loaf, and embed them with a rubber duck embed! The circles act as bubbles giving your soap a touch of fun and uniqueness. Guests will love them at baby showers!

Common Uses:
Melt & Pour Soap. Cold Process Soap.

Points of Interest:
This soap column mold makes one mini circle shaped soap column that can be embedded into a loaf. The silicone construction allows for easy soap removal. One side of the mold is hinged and three sides have edges that seal closed. The mold does not stand upright by itself. Leaning it against a sturdy upright surface or putting in a heavy cup will keep it upright. See “Directions” for more information on how to use this mold.

Manufacturer: Crafter’s Choice®
Material: Silicone
Style: Column Mold
Number of Cavities: 1
Country of Origin: China
Color: Natural Semi-Transparent
Max. Temperature: 500ºF
Wash molds in warm, sudsy water.

Country Of Origin: China

Helpful Product Information:
Style: Column Bar Cavities: 1
Bar Depth: 8.125" Bar Diameter: 0.5
Bar Length: 0.5" Bar Width: 0.5"
Max Pour Temperature: 125°F Max Temperature: 500ºF

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Close the mold by firmly pressing the edges together. Stand the mold in a sturdy measuring cup. Slowly pour melted soap into mold, and allow soap to harden. Open mold and remove soap. Trim edges with a potato peeler or spatula. Embed mini column into a loaf. Embed multiple mini columns for a unique design.

Cold Process Soap: Close the mold by firmly pressing the edges together. Stand the mold in a sturdy measuring cup. Slowly pour traced soap into mold. After at least 24 hours, open mold and remove soap with gloved hands. Trim edges with a potato peeler or spatula. Embed soap into a loaf. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Hand wash mold in warm, sudsy water.
SDS & Documents
Questions & Answers (5)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 5 Question(s) Shown Below

Q Bubble
Posted By: Jeanne   |   April 25, 2020

"So if I understand this right this mold is 8.5" long and it only holds 1 ounce of soap? That's expensive for 1 ounce mold and over 8 inches just doesnt seem right."

Q Bubble
Posted By: Ila   |   April 19, 2019

"Does this mold need to be filled in thirds or layers to prevent bowing? "

Q Bubble
Posted By: Andrea   |   October 29, 2015

"How much soap does it take to fill it? How many ounces should I melt at a time, so I am not remelting soap."

Q Bubble
Posted By: Jessica   |   August 13, 2015

"Any news on the dimensions of this mold?"

Q Bubble
Posted By: Kathy   |   February 19, 2015

"What size is this?"

Recipes & Videos (0)
CustomerReviews (6)
Submit A Rating Average Customer Rating: (6 Reviews)

Lisa • North Carolina

Date Submitted:  06/09/2017

I Recommend This Product!
"Great for small embeds "
COMMENTS:  Simple and small circles. I wasn't sure what in the world I would use this small circle (stick) for, but now that I have made a few of them..ideas are starting to pop! I had no issues with major leaks, I made sure there was a solid seal before using. You do have to do a small clean up as a tiny bit spread out in the seal of the mold. More like a little rough edge, but was not an issue, just ran a sharp knife carefully over those places to trim. Takes very very little product to fill the tube.
PRODUCT USED IN:   Soap - Melt & Pour
Lindsay • Wisconsin

Date Submitted:  03/15/2017

I Recommend This Product!
COMMENTS:  loved these! They don't leak they're easy to put together and easy to clean. They're so small it's hard to get the soap to gel without adding heat, but that's not a huge deal if you plan for it.
PRODUCT USED IN:   Soap - Cold Process
Theresa • Tennessee

Date Submitted:  10/25/2016

"An ok mold,to small though"
COMMENTS:  A little harder to work with but it will work,if it were any smaller it would be micro.
PRODUCT USED IN:   Soap - Cold Process
• Shape
• The way it fits together
Agnes • New York

Date Submitted:  08/02/2016

I Recommend This Product!
"Nice Product"
COMMENTS:  Good for making M&P embeds.
PRODUCT USED IN:   Soap - Melt & Pour
Caroline • New York

Date Submitted:  05/14/2016

I Recommend This Product!
"Another wonderful soap mold!"
COMMENTS:  Love this mold! I also bought the heart mini mold too. In my opinion the WSP molds are really fantastic and number #1, they set the standard for soap molds in the industry. If you want the best quality this is where you should buy your molds. They are a little bit more expensive here but they are well worth it in the long run since these molds will last for a really long time. In the long run I believe they will wind up being more economical since they won't have to be replaced often, like many inferior quality molds out in the market.
PRODUCT USED IN:   Soap - Melt & Pour
• Everything!
• Nothing
Debbie • Missouri

Date Submitted:  11/12/2015

I Recommend This Product!
"Great for Embellishing"
COMMENTS:  This mold is great for making circles in bars of soap. After the soap in unmolded, I embed the soap cylinder in my cold (or hot) process soap batter. When the soap is cut, it appears as a circle. This can be useful if you want to create a "scene" in your soap, with a sun or moon on the horizon. If using several cylinders, you can make polka dots or a bubbles effect in your soap. Experiment with different colors. Sometimes, if I have leftover soap, I'll pour it into this mold to use in a near future batch.
PRODUCT USED IN:   Soap - Melt & Pour
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved