We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
The round citrus mold is used for making wax tarts for a potpourri or tart burner. When the scented tart heats up, it fills the room with aroma. The molds are also great for guest soaps.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
Helpful Product Information:
Material: Plastic
Style: Bar
Avg. Bar Weight: 0.65 oz
Bar Cavities: 8
Bar Depth: 0.875"
Bar Diameter: 1.5
Bar Length: 1.5"
Bar Width: 1.5"
Max Temperature: 145ºF
Mold Capacity (oz): 5.2
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: I love these for embeds, for making little limes, oranges, lemons to top my soaps! Great size! Just wish it came out of mold a little easier.
COMMENTS: We use these for MP embeds, just fill them a little bit. We've also had really good success making cute bath bombs with them. I'm very pleased with the quality.
COMMENTS: I mainly purchased this item for the use of melt and pour. I was a little worried when I received it because I wasn't sure how difficult it would be to remove the soap out of the mold. However, it was very easy. They practically popped out on their own. It does quicken the process if you place it in the refrigerator for a few minutes after you have filled the mold up. Then flip it over and out they go. I recommend this :)
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Sturdy
• Not have each mold so deep.
Heather • Arizona
Date Submitted: 11/21/2016
I Recommend This Product!
"Pefect size!"
COMMENTS: These molds are so easy to use. They are the perfect size for my products!
COMMENTS: They are so small:( I didn't realize it was plastic or I probably would not have ordered it. But as with plastic molds, the detail is great.
PRODUCT USED IN: Soap - Melt & Pour
LINDA • South Carolina
Date Submitted: 07/18/2016
I Recommend This Product!
"Adorable lemon mold"
COMMENTS: Love this mold for dishwasher tablets.
PRODUCT USED IN: Bath Fizzies & Salts
Janice • New Jersey
Date Submitted: 06/18/2016
I Recommend This Product!
"Perfect"
COMMENTS: I use this mold for embeds for Margaritaville soap. Perfect finishing touch to the top of the soap.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Realistic
• Hard to release, even frozen • Easy to damage mold during release
Evelyn • California
Date Submitted: 05/14/2016
I Recommend This Product!
"Cute little shape"
COMMENTS: Great little shape for citrus scented tiny lotion bars. The product comes out of the mold very easily, and clean up is very simple too.
PRODUCT USED IN: Lotion Bars & Sticks
Jamie • Arizona
Date Submitted: 04/21/2016
I Recommend This Product!
"Citrus Mold"
COMMENTS: Great mold for making MP embeds...easy to unmold and nicely detailed
PRODUCT USED IN: Soap - Melt & Pour
Lui • Singapore
Date Submitted: 09/17/2015
I Recommend This Product!
"Cute size"
COMMENTS: Cute size to make embellishments on my soaps.
PRODUCT USED IN: Soap - Melt & Pour
CarolAnn • New Mexico
Date Submitted: 08/11/2015
I Recommend This Product!
"Citrus Guest Soap Mold 154"
COMMENTS: Very pretty mold. Extremely easy to unmold, just pops right out. Washes with warm soap. Particularly nice when used with citrus scented soaps and bars. Very cute.
COMMENTS: Made adorable little orange and lemon slices for embeds. Happy with the mold and it was easy to pop the soap out.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Not one thing!
chris • Ohio
Date Submitted: 06/21/2014
I Recommend This Product!
"citrus mold"
COMMENTS: nice mold. makes small little soaps.easier to unmold if you put it in the freezer for awhile
PRODUCT USED IN: Soap - Melt & Pour
Katy • North Carolina
Date Submitted: 11/03/2013
I Recommend This Product!
"Cutest Soy tarts ever"
COMMENTS: this mold is amazing, i love the silicone material and ive been using it to make soy wax tarts scented with citrus-y essential oils. so far theyve all turned out perfect. so adorable.
PRODUCT USED IN: Candles - Soy
Nyota • Connecticut
Date Submitted: 09/08/2013
I Recommend This Product!
"Great for guest soaps"
COMMENTS: These molds make the cutest guest sized soap melt and pour soaps. However, they are flexible enough to be used for wax tarts, bath bombs, homemade chalk projects, etc. A good buy all around.
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Retired Soap Molds
