Visit Us – Pick Up Orders Save 10% (Read More)
FREE SHIPPING ~ On Orders Over $25*
 
 
Wholesale Supplies Plus
0
 
   
 
 
 
Molds All Molds Fruit - (You Are Here - P9499)

Milky Way™ Citrus Small Round Soap Mold (MW 154)

Pricing
$9.56 for 1 Mold
$41.25 for 5 Mold
$95.95 for 20 Mold
$385.70 for 150 Mold (Bulk)



Additional Information
The round citrus mold is used for making wax tarts for a potpourri or tart burner. When the scented tart heats up, it fills the room with aroma. The molds are also great for guest soaps.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 0.65 oz Bar Cavities: 8
Bar Depth: 0.875" Bar Diameter: 1.5
Bar Length: 1.5" Bar Width: 1.5"
Max Temperature: 145ºF Mold Capacity (oz): 5.2



This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (0)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 0 Question(s) Shown Below

Recipes & Videos (7)
CustomerReviews (20)
Submit A Rating Average Customer Rating: (20 Reviews)



Peggi Fikac • Illinois

Date Submitted:  08/25/2018

I Recommend This Product!
"Perfect size"
COMMENTS:  I love these for embeds, for making little limes, oranges, lemons to top my soaps! Great size! Just wish it came out of mold a little easier.
PRODUCT USED IN:   Soap - Melt & Pour, Bath Fizzies & Salts
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Great for embeds
• hard getting out of mold
Aimee • Kentucky

Date Submitted:  02/09/2018

I Recommend This Product!
"Cute little mold!"
COMMENTS:  We use these for MP embeds, just fill them a little bit. We've also had really good success making cute bath bombs with them. I'm very pleased with the quality.
PRODUCT USED IN:   Soap - Melt & Pour, Bath Fizzies & Salts
Sondarya • Massachusetts

Date Submitted:  10/08/2017

I Recommend This Product!
"citrus small round soap mold"
COMMENTS:  I like this mold because it is easier to unmold product from citrus small round soap mold compare to the one , I bought earlier.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Bath Fizzies & Salts
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• easy to unmold
Ginger  • Kentucky

Date Submitted:  10/04/2017

I Recommend This Product!
"Great!"
COMMENTS:  Perfect!
PRODUCT USED IN:   Soap - Melt & Pour
Christian • California

Date Submitted:  03/09/2017

I Recommend This Product!
"Just what I was looking for :)"
COMMENTS:  I mainly purchased this item for the use of melt and pour. I was a little worried when I received it because I wasn't sure how difficult it would be to remove the soap out of the mold. However, it was very easy. They practically popped out on their own. It does quicken the process if you place it in the refrigerator for a few minutes after you have filled the mold up. Then flip it over and out they go. I recommend this :)
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Sturdy
• Not have each mold so deep.
Heather • Arizona

Date Submitted:  11/21/2016

I Recommend This Product!
"Pefect size!"
COMMENTS:  These molds are so easy to use. They are the perfect size for my products!
PRODUCT USED IN:   Soap - Shave Shampoo, Bath Fizzies & Salts, Lotion Bars & Sticks
Tami • California

Date Submitted:  07/23/2016

"Orange Slices"
COMMENTS:  They are so small:( I didn't realize it was plastic or I probably would not have ordered it. But as with plastic molds, the detail is great.
PRODUCT USED IN:   Soap - Melt & Pour
LINDA • South Carolina

Date Submitted:  07/18/2016

I Recommend This Product!
"Adorable lemon mold"
COMMENTS:  Love this mold for dishwasher tablets.
PRODUCT USED IN:   Bath Fizzies & Salts
Janice • New Jersey

Date Submitted:  06/18/2016

I Recommend This Product!
"Perfect"
COMMENTS:  I use this mold for embeds for Margaritaville soap. Perfect finishing touch to the top of the soap.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Realistic
• Hard to release, even frozen
• Easy to damage mold during release
Evelyn • California

Date Submitted:  05/14/2016

I Recommend This Product!
"Cute little shape"
COMMENTS:  Great little shape for citrus scented tiny lotion bars. The product comes out of the mold very easily, and clean up is very simple too.
PRODUCT USED IN:   Lotion Bars & Sticks
Jamie • Arizona

Date Submitted:  04/21/2016

I Recommend This Product!
"Citrus Mold"
COMMENTS:  Great mold for making MP embeds...easy to unmold and nicely detailed
PRODUCT USED IN:   Soap - Melt & Pour
Lui • Singapore

Date Submitted:  09/17/2015

I Recommend This Product!
"Cute size"
COMMENTS:  Cute size to make embellishments on my soaps.
PRODUCT USED IN:   Soap - Melt & Pour
CarolAnn • New Mexico

Date Submitted:  08/11/2015

I Recommend This Product!
"Citrus Guest Soap Mold 154"
COMMENTS:  Very pretty mold. Extremely easy to unmold, just pops right out. Washes with warm soap. Particularly nice when used with citrus scented soaps and bars. Very cute.
PRODUCT USED IN:   Soap - Cold Process, Soap - Shampoo Bars, Bath Fizzies & Salts, Lotion Bars & Sticks
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Easy to unmold.
• Easy to wash.
Jen • Georgia

Date Submitted:  02/12/2015

I Recommend This Product!
"So cute"
COMMENTS:  It looks really cute and easy to unmold.
PRODUCT USED IN:   Room & Linen Sprays
Jessica • Florida

Date Submitted:  01/11/2015

I Recommend This Product!
"Shower steamer"
COMMENTS:  We are using this product for our small shower steamers. The detail in the mold is very nice. Works well for molding the shower tabs.
PRODUCT USED IN:   Bath Fizzies & Salts
Shirley • North Carolina

Date Submitted:  12/26/2014

I Recommend This Product!
"citrus guest soap mold"
COMMENTS:  This mold makes a nice sized small bar. The design is good and clear when finished. Pleased with this.
PRODUCT USED IN:   Soap - Melt & Pour, Lotion Bars & Sticks, Candles - Paraffin
Stacey • South Carolina

Date Submitted:  07/31/2014

I Recommend This Product!
"Perfect size!"
COMMENTS:  Made adorable little orange and lemon slices for embeds. Happy with the mold and it was easy to pop the soap out.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Not one thing!
chris • Ohio

Date Submitted:  06/21/2014

I Recommend This Product!
"citrus mold"
COMMENTS:  nice mold. makes small little soaps.easier to unmold if you put it in the freezer for awhile
PRODUCT USED IN:   Soap - Melt & Pour
Katy  • Alabama

Date Submitted:  11/03/2013

I Recommend This Product!
"Cutest Soy tarts ever"
COMMENTS:  this mold is amazing, i love the silicone material and ive been using it to make soy wax tarts scented with citrus-y essential oils. so far theyve all turned out perfect. so adorable.
PRODUCT USED IN:   Candles - Soy
Nyota • Connecticut

Date Submitted:  09/08/2013

I Recommend This Product!
"Great for guest soaps"
COMMENTS:  These molds make the cutest guest sized soap melt and pour soaps. However, they are flexible enough to be used for wax tarts, bath bombs, homemade chalk projects, etc. A good buy all around.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Price
• Easy to clean
Customer Photos (0)
Charts & Calculators
 
 
Stay updated on sales, new products, free recipes, and more.
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Adding To An Order
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Site Feedback

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2019 Wholesale Supplies Plus, LLC - All Rights Reserved