We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Bring this adorable duck into your child's next bath. They'll love playing with the duck and you'll love how squeaky clean they'll be. Bath time has never been so much fun! Embed fits in Crafter's Choice Regular Loaf Silicone Mold 1501 and Rectangle Regular Column Silicone Soap Mold 2009.
Helpful Product Information:
Style: Column
Bar Cavities: 1
Bar Depth: 1.75"
Bar Length: 8.125"
Bar Width: 2.375"
Max Pour Temperature: 135°F
Max Temperature: 500ºF
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Close the mold by firmly pressing the edges together. For added safety, clamp the edges. Slowly pour melted soap no hotter than 130ºF into mold. Allow soap to harden then open mold and remove soap. Trim edges with a potato peeler or spatula. Embed soap into a loaf or slice into bars.
Cold Process Soap: Close the mold by firmly pressing the edges together, and clamp the edges. Slowly pour traced soap into mold. After at least 24 hours, open mold and remove soap with gloved hands. Trim edges with a potato peeler or spatula. Embed soap into a loaf or slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Wholesale Supplies Plus, Inc. certifies that this fragrance product is in compliance with the standards of the International Fragrance Association, provided the fragrance is used in the above application (s) at the noted maximum concentration level(s).
The "Maximum Use Level for Skin Exposure" is the amount of fragrance, flavor and essential oil that can come in contact with the skin. It does not mean that your base product can perform at these levels. You must test each oil in each application for evaluation of desired performance.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: So far I absolutely love all the column molds I've purchased from WSP! I'm so happy that they have such great sales because THAT'S when I tryout all the products that I may not 'need' but am interested in purchasing...It gives me that little nudge to make the leap. The ducky column mold makes perfect sized soap bars for little hands when used alone (as well as great sized baby shower soap favors) but it also makes and adorable contrasting embeds in my loaf bars! Love, Love, Love... (Now I'm just waiting for the LIPS column mold to go on sale so I can buy several...It's my signature mark and I think it'll make great sample bars)
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• quality • size • ease of use
• nothing
Noel • New Jersey
Date Submitted: 12/22/2018
I Recommend This Product!
"Just the right size "
COMMENTS: I am using these as embeds in my cold process creating soaps for a baby shower. The only thing that I would suggest is make sure you have clamps on both sides as the mold can pop open. Makes great little duck embeds
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• The size • Unmolding easy
• Something that would make sure the mold • Cannot separate
Carolynn • New Hampshire
Date Submitted: 12/05/2018
I Recommend This Product!
"Adorable "
COMMENTS: This mold is easy to use and stays together fairly well. Make sure your soap batter is a bit thicker
PRODUCT USED IN: Soap - Cold Process
Cherome • Illinois
Date Submitted: 03/22/2018
I Recommend This Product!
"Love it"
COMMENTS: This duck mold turned out sooo great
PRODUCT USED IN: Soap - Melt & Pour
Jennifer • Minnesota
Date Submitted: 02/26/2018
I Recommend This Product!
"Perfect for sliced bars of soap or embedded."
COMMENTS: I embedded this duck and it turned out wonderful. Highly recommended.
PRODUCT USED IN: Soap - Melt & Pour
Theresa • Tennessee
Date Submitted: 02/20/2018
I Recommend This Product!
"I love this mold"
COMMENTS: Cold process soap comes right out
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• The cute duck shape
• Nothing
Janet • Connecticut
Date Submitted: 01/22/2018
I Recommend This Product!
"M&P Soap"
COMMENTS: This mold is perfect for an embed. Made cute little soaps for the holiday and they sold like hot cakes.even got a special order for
Baby shower gifts.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy to use
Susan • Ohio
Date Submitted: 01/04/2018
I Recommend This Product!
"This duck is so cute"
COMMENTS: This mold makes cute little duck soaps that I give to my grandkids and donate to a local church. The quality is excellent. I do sometimes have a little trouble getting it sealed right, but that is also with other column molds. I have arthritis in my hands so I'm sure that doesn't help. I am very happy with this mold.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Christie • Georgia
Date Submitted: 09/01/2017
I Recommend This Product!
"love it!"
COMMENTS: This mold is exellent and makes a precise duckie in cp soap.
PRODUCT USED IN: Soap - Cold Process
gayle • North Carolina
Date Submitted: 08/19/2017
I Recommend This Product!
"LOVE MY DUCK MOLD"
COMMENTS: wHAT A GREAT MOLD , JUST THE RIGHT SIZE. MY SOAP LOOK GREAT
PRODUCT USED IN: Soap - Cold Process
Janet • Florida
Date Submitted: 08/04/2017
I Recommend This Product!
"Really cute ducky "
COMMENTS: I would have given it 5 stars if it didn't get a split in it after 3 uses. The split does not impact the functionality of the mold, it is in the corner of the thick part of the seal. The mold seals very well all the way around, it's easier to get a good seal if you start at 1 end and work your way around. I place my mold in a larger container with a towel so I can go through the gel phase and so the mold stands without falling over. I don't know that it would but I don't want to chance it. I pour at a light medium trace and have not had any issue with leaking. The mold releases very easy. I use this to imbed in another soap batter so I tend to rush the curing process but I have not had any release issues. The soaps are large on their own and could be sliced and used or shaped slightly. Overall I am very satisfied and will purchase another.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Seal • Ease of release • Size
Andrea • North Carolina
Date Submitted: 06/01/2017
I Recommend This Product!
"Not just for embeds!"
COMMENTS: I used this mold to make baby shower favors. The duckies were the perfect size to fit in a 3x4" organza bag. The mold was very easy to use, but with the hot process soap the mold did come apart at the bottom as I filled to the top. I don't think this would happen with cold process. The mold released the soap easily and was easy to clean. I should have bought another!
PRODUCT USED IN: Soap - Hot Process
Andria • California
Date Submitted: 12/28/2016
I Recommend This Product!
"Well made"
COMMENTS: I ordered this mold when it was on sale and let me just say how pleased I am with the purchase. It's not cheaply made. It is made out of high quality, thick silicone. It closes and snaps well to prevent leaks. Highly recommend the mold. Wash by hand.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• It has weight
• nothing
MARLENY • California
Date Submitted: 11/23/2016
I Recommend This Product!
"really cute"
COMMENTS: sooo cute my son loved the soaps shape
PRODUCT USED IN: Soap - Melt & Pour
Barbara • Oregon
Date Submitted: 09/30/2016
I Recommend This Product!
"Great for baby shower soaps"
COMMENTS: Loving this mold for baby shower soaps
PRODUCT USED IN: Soap - Melt & Pour
Agnes • New York
Date Submitted: 08/02/2016
I Recommend This Product!
"Cute Mold"
COMMENTS: Worked well. Just make sure your edges are snapped together and well sealed.
PRODUCT USED IN: Soap - Melt & Pour
Karen • Washington
Date Submitted: 07/19/2016
I Recommend This Product!
"So Fun To Add Shapes Into Soaps"
COMMENTS: I love all of the silicone column molds. It is kind of tricky when you first start using them as you have to make sure you have them well sealed all the way around, but once you master that, it is a breeze. I love putting them in my M & P loves for added character in my bars.
PRODUCT USED IN: Soap - Melt & Pour
Sheryl • Georgia
Date Submitted: 06/15/2016
I Recommend This Product!
"Fun shape for embeds!"
COMMENTS: Love this for kids soaps!
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• the shape • ease of unmolding
Erin • Indiana
Date Submitted: 05/08/2016
I Recommend This Product!
"Cute duck"
COMMENTS: I am using this in a soap made with duck fat. It is cute, and a great size. The only thing I don't like is that you have to use binder clips to hold it together. Otherwise, it is a great mold.
PRODUCT USED IN: Soap - Cold Process
Cynthia • Ohio
Date Submitted: 03/14/2016
I Recommend This Product!
"very cute"
COMMENTS: this made very cute imbed for a special order for a baby shower. I would recommend having file clamps on the sides to hold together, I had more than one mishap with mold popping apart and hot soap all over but once I put clamps on it worked wonderful.
PRODUCT USED IN: Soap - Melt & Pour
Fran • Texas
Date Submitted: 02/03/2016
I Recommend This Product!
"Easy to mold"
COMMENTS: I made a duck from clear melt and pour. I inserted this into my cold process soap.
It's a big hit.
The mold is very easy to use.
This mold is large enough to slice and sell without embedding in other soap.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• easy to mold/unmold
• would like a little smaller mold
Tanya • Maryland
Date Submitted: 01/08/2016
I Recommend This Product!
"Super cute but a bit small"
COMMENTS: Cute but small. Stays closed with extra help from clips
PRODUCT USED IN: Soap - Cold Process
Janet R • Wisconsin
Date Submitted: 09/30/2015
I Recommend This Product!
"My little duck mold"
COMMENTS: When I saw this column silicon soap mold for the little duck, I just had to have it. I ordered two right away because my tall and skinny mold is 14" long. I just unmolded, and after putting them in the freezer for a short time, they came out perfect! I can't wait to make cp soap tomorrow and see how my little ducky looks in the mold. Thanks for another wonderful mold!
Janet Schreiner
PRODUCT USED IN: Soap - Cold Process
Carmen • Nevada
Date Submitted: 09/29/2015
I Recommend This Product!
"Great mold!!!"
COMMENTS: I'm in love with this column mold! The duck comes out perfect and makes a great embed in soaps. A 280 grams soap recipe fills the cavity perfectly.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Very sturdy.
• Really none.
Show more
Customer Photos
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Molds By Material
Retired Soap Molds
See customer photos
Product Details 
Have more questions? See Q&A
Recipes & Videos (2)
Questions & Answers (4)
Customer Reviews (24)
Customer Photos
Charts & Calculators
