Milky Way™ Faith, Hope, Love Soap Mold Tray (MW 08) - Wholesale Supplies Plus
Current Processing Times: 3-4 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Cross & Christian - (You Are Here - P8719)

Milky Way™ Faith, Hope, Love Soap Mold Tray (MW 08)


Additional Information
The Faith Hope Love Soap Mold Tray features all three words, each surrounded by a beautiful Art Déco border.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Tray
Avg. Bar Weight: 4 oz Bar Cavities: 6
Bar Depth: 1" Bar Length: 2"
Bar Width: 2.2" Max Temperature: 145ºF
Mold Capacity (oz): 24

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (3)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 3 Question(s) Shown Below

Q Bubble
Posted By: Jacqueline   |   December 23, 2020

"Can these be used for candle wax melts?"

Q Bubble
Posted By: Kathleen    |   September 07, 2013

"Is this made out of silicone?"

Q Bubble
Posted By: Emily   |   June 02, 2013

"Are these individual soap cavities or one big mold?"

Recipes & Videos (1)
CustomerReviews (17)
Submit A Rating Average Customer Rating: (17 Reviews)

shannon • Texas

Date Submitted:  09/06/2017

I Recommend This Product!
"Faith HOPE love"
COMMENTS:  Love this and so do my customers. It's not to hard to get soap out of mold. Just have to ease it out. But the design always turns out great
PRODUCT USED IN:   Soap - Melt & Pour
Kathleen • Ohio

Date Submitted:  09/22/2016

I Recommend This Product!
"Best Seller"
COMMENTS:  This mold is absolutely perfect. It doesn't warp under the heat of m&p soap. It releases the soap with ease. The finished product is perfect and always sells out at my craft tables. Definitely recommend! Perfect for beginners.
PRODUCT USED IN:   Soap - Melt & Pour
Tabitha • Michigan

Date Submitted:  01/03/2016

I Recommend This Product!
COMMENTS:  I absolutely love this mold. It is so gorgeous, and my customers love them.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
• design
• ease of soap removal
• make it a sturdier plastic
• warps to soon from heat
Rachelle • Colorado

Date Submitted:  10/05/2015

I Recommend This Product!
"Nice Size Bars"
COMMENTS:  My customers like the words in these bars. I like the size and shape as well. Some people like holding a bigger bar like this. Glad I bought this one.
PRODUCT USED IN:   Soap - Cold Process
• Size and Shape
• Milky Way brand
• Words on the bars
Barbara • North Carolina

Date Submitted:  05/15/2015

I Recommend This Product!
"Faith, Hope, Love Soap Mold Tray"
COMMENTS:  This mold produces bars of soap with an inspirational message, often purchased as a gift for someone to speak encouragement. I enjoy being able to produce a product that gives hope. Thanks!
PRODUCT USED IN:   Soap - Melt & Pour
CarolAnn • New Mexico

Date Submitted:  03/11/2015

I Recommend This Product!
"Faith, Hope Love Soap Mold Tray"
COMMENTS:  Oh this is the prettiest and easiet mold ever. I use this every day. The soap pops right out. The words are very clear. I do not understand why other reviewers spray or freeze. Just flip it over and out it comes. Gorgeous, perfect bars and fast. Please also try the Loving Hands mold, Chakra molds. They are lovely too. Your friends think you spent all day molding these bars and nothing to it.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Shampoo Bars
• Easy. Gorgeous.
• Nothing.
Krista • California

Date Submitted:  11/17/2014

I Recommend This Product!
"really like this mold"
COMMENTS:  I was a little skeptical about using this mold at first since it is a hard plastic. I wasn't sure if it would be difficult to get the soap out. The first few times I used it I sprayed a little cooking spray in it. The soap released pretty well but there was a slight film of cooking spray on my soap. The next few times I used it I did not use cooking spray and it was a little difficult to get the soap out. I solved this issue by placing the mold in the freezer for about 5-10 minutes and unmoldng was a piece of cake! It's much easier to unold the soap when you fill the mold up all the way. I prefer using the mold without the cooking spray and just putting it in the freezer in I need to.
PRODUCT USED IN:   Soap - Melt & Pour
Jessica • California

Date Submitted:  10/29/2014

I Recommend This Product!
"Favorite mold"
COMMENTS:  This is hand down my favorite and my customer's favorite design. I'm ordering 3 more so I can make larger quantities of this trio of bars. It un-molds very easily as well. Love it!!
PRODUCT USED IN:   Soap - Melt & Pour
tracy • Ohio

Date Submitted:  10/27/2014

I Recommend This Product!
"Great Mold"
COMMENTS:  I had HOPE that this mold would be good and put my Faith in the company that it would be.. my outcome from using the mold is LOVE. This is probably the mold I use the most in making soaps.
PRODUCT USED IN:   Soap - Melt & Pour
angela • North Carolina

Date Submitted:  08/18/2014

I Recommend This Product!
"Instant HIt"
COMMENTS:  I bought this mold to make for guests a at shower for my daughter. it was a instant hit!
PRODUCT USED IN:   Soap - Melt & Pour
Sybella • Massachusetts

Date Submitted:  05/23/2014

I Recommend This Product!
"great idea!"
COMMENTS:  I love the ideas of this mold, I do have some issue with being able to cut it straight since it is one big block that has to be cut into 6 separate blocks, however I work mostly with molds and those soap makers who do layering and are used to cutting will likely have no issue with that. I personally wish these came in separate molds to pop out of, it would be easier. I LOVE the word messages though!
PRODUCT USED IN:   Soap - Melt & Pour
• words
• make it seperate molds
kasey • New York

Date Submitted:  05/06/2014

I Recommend This Product!
"not for CP, great for MP"
COMMENTS:  I like it. Not what I was expecting. Clearly I did not read the description. I just looked at the pic and ordered it. Its not bad, but def not for CP. You can use it for CP...but difficult to remove the words. You may have to use a little bit of grape seed oil for help. I like the things you can do with the mold. Great for MP..Make three/four color soap. To me it looks like its silicone but its not.
PRODUCT USED IN:   Soap - Melt & Pour
• easy too make a change if there is
• make silicone
health • Minnesota

Date Submitted:  03/11/2014

I Recommend This Product!
"nice size"
COMMENTS:  This is the only soap mold that I have from WSP from which soap came out super easy even before I had to put it in freezer. Love design with words.
PRODUCT USED IN:   Soap - Hot Process
Linda  • North Carolina

Date Submitted:  02/24/2014

I Recommend This Product!
"Love the messages"
COMMENTS:  I enjoy using Milky Way molds and this one is no exception. This has been a great mold to use for fundraisers and customers really enjoy the messages. I have learned to work with these molds and have very little issue with getting soaps out although olive oil and aloe vera base can test me sometimes:)
PRODUCT USED IN:   Soap - Melt & Pour
• Love the messages
• Easy to clean
• Easy to work with
Dawn • Wisconsin

Date Submitted:  10/24/2013

I Recommend This Product!
COMMENTS:  Love this mold, the soaps turn out great! Just like the picture for the Inspiration Kit. Looks like I spent a lot of time on them, very nice.
PRODUCT USED IN:   Soap - Melt & Pour
Karen • Washington

Date Submitted:  10/10/2013

I Recommend This Product!
"Beautiful Mold"
COMMENTS:  I bought this mold to make soaps for Breast Cancer Awareness. I made them pink with white words and frame, and white with pink words and frames. Turned out absolutely BEAUTIFUL!
PRODUCT USED IN:   Soap - Melt & Pour
Wendy  • Pennsylvania

Date Submitted:  07/24/2013

I Recommend This Product!
"Beautiful "
COMMENTS:  This mold makes beautiful soaps at just the right size to fit in your hand! The soap came out of the mold beautifully. This is definitely a must have mold!
PRODUCT USED IN:   Soap - Melt & Pour
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved