Milky Way™ Fins and Feathers Tray Soap Mold (MW 179) - Wholesale Supplies Plus
Current Processing Times: 3-4 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Fish, Frogs & Turtles - (You Are Here - P10360)

Milky Way™ Fins and Feathers Tray Soap Mold (MW 179)


Additional Information
You’ll find fish and fowl in this beautifully detailed mold based on M.C. Escher’s famous “Bird/Fish (No. 22)” tessellation. The graphic design elements on the Fins & Feathers Soap Mold Tray make it perfect for Op Art collectors and fans of geometry.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 4 oz Bar Cavities: 6
Bar Depth: 1.25" Bar Length: 2"
Bar Width: 2.75" Max Temperature: 145ºF
Mold Capacity (oz): 24

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below

Q Bubble
Posted By: Jenn   |   May 27, 2015

"What are the individual bar measurements for this mold?"

Recipes & Videos (1)
CustomerReviews (3)
Submit A Rating Average Customer Rating: (3 Reviews)

Jacqueline • Florida

Date Submitted:  09/21/2018

I Recommend This Product!
"Super Cute!"
COMMENTS:  I love this mold. It is super cute and works great. I love that you can hardly tell where the bird begins and the fish ends. Good design, and not a super flimsy mold.
PRODUCT USED IN:   Soap - Melt & Pour
Catherine • California

Date Submitted:  12/13/2016

I Recommend This Product!
COMMENTS:  Gorgeous, as always with Milky Way. Detail, artistry, strength, ease-of-use. Milky way is the best!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
• Bigger bars
CarolAnn • New Mexico

Date Submitted:  08/02/2015

I Recommend This Product!
"Fins and Feathers Tray Soap Mold"
COMMENTS:  This is the most gorgeous soap mold we have. Can not begin to say the lovely work we create with it. The bars of soap are ordered in bulk before we can get them made. The mold is a breeze to use. Just pour in the soap batter and let cool and pop it out and cut your 6 wonderful bars. The design on each bar looks like Japanese Koi and Canada Geese woven together. You can use different colors to make your bars outshine everyone else. It is very easy to put different colors into the parts of the birds and fish. We even put a small dot for the fish eye. So pretty when done. We sell these for a charity and they are the most popular product we sell. Please give this a try. We need to buy several more of these to keep up. By the way, the mold may look as though it will not last but we have used these for years and they do. Just be careful. All you need is a gentle push and the whole tray of soap pops out easily. Warm water to wash.
PRODUCT USED IN:   Soap - Cold Process, Soap - Shampoo Bars
• Beautiful unique design.
• Ease of use.
• Long lasting. Washing easy.
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved