Visit Us – Pick Up Orders Save 10% (Read More)
Lead Times 4-6 Business Days FREE SHIPPING ~ On Orders Over $25*
 
 
Wholesale Supplies Plus
0
 
   
 
 
 
Molds All Molds Fleur de Lis - (You Are Here - P1797)

Milky Way™ Fleur de Lis Soap Mold Tray (MW 12)

Pricing
$7.17$9.56 for 1 Mold
$30.94$41.25 for 5 Mold
$71.96$95.95 for 20 Mold
$385.70 for 150 Mold



Additional Information
Traditionally, the fleur de lis has been used to represent French royalty, signifying perfection, light, and life. Class up the joint with the Fleur De Lis Soap Mold Tray and pop out nine regal soaps.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Tray
Avg. Bar Weight: 3.75 oz Bar Cavities: 9
Bar Depth: 1.378" Bar Length: 2.625"
Bar Width: 2.625" Max Temperature: 145ºF
Mold Capacity (oz): 33.75



This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.

Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below



Q Bubble
Posted By: Heidi   |   January 19, 2014

"I'm going to use this tray to make lotion bars. Is there any way in particular that I should prepare the trays Before pouring in the batter so the bars don't stick? Thanks!"


Recipes & Videos (0)
CustomerReviews (13)
Submit A Rating Average Customer Rating: (13 Reviews)



Lane • Louisiana

Date Submitted:  03/19/2019

I Recommend This Product!
"Ideal Fleur de Lis Tray Mold "
COMMENTS:  I made some Fleur De Lis melt and pour soap using this Milky Way mold. They were perfect. I left my melt and pour soap in the mold overnight. The next morning I put it in the fridge for 15-20 minutes. When I went to remove the soap from the mold I pressed on the back of the mold with my thumbs. The soap removed beautifully. It was easy to cut the soap by following the lines between the mold. Cleaning the mold was easy also.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Soap released easily from the mold.
• The design is perfect.
Edna-Mae • North Carolina

Date Submitted:  07/26/2016

I Recommend This Product!
"Great for sports, Mardi Gras fans"
COMMENTS:  The perfect mold for Mardi Gras, 3 Musketeers or Saints fans! Great design.
PRODUCT USED IN:   Soap - Melt & Pour
Retta • New Mexico

Date Submitted:  01/28/2016

I Recommend This Product!
"Solid Mold"
COMMENTS:  This soap mold is very sturdy and I have used it numerous times and absolutely love this mold. Flexible but again, sturdy. Accent to the soap is outstanding. Love love love this mold.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Durability
• Nothing
Courtney • Ohio

Date Submitted:  12/03/2015

I Recommend This Product!
"wonderful"
COMMENTS:  I am pleased to say that I have been able to use these with hot process soaps if I get the temp down to around 130-145. I haven't had any melting or warping yet! Turns out great!
PRODUCT USED IN:   Soap - Cold Process, Soap - Hot Process
Sabine • Washington

Date Submitted:  11/15/2015

I Recommend This Product!
"Great Mold"
COMMENTS:  I own several molds like this, and I love them all. They are perfect for a 2lbs tray of MP, and I use the Fleur de Lis specifically for a more expensive look and feel with the Three Butter mp, colorant, and EO/FO from WSP.
PRODUCT USED IN:   Soap - Melt & Pour
Taelor • Tennessee

Date Submitted:  08/03/2015

I Recommend This Product!
"Nice little mold"
COMMENTS:  Purchased this mold to make my first batch of melt and pour. Unmolding was easy, and the design lasts a really long time in the finished product.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Nothing
Liz • Texas

Date Submitted:  03/01/2015

I Recommend This Product!
"GORGEOUS!!"
COMMENTS:  These ars so detailed and beautiful. They pop out easily, and so simple to cut and wrap in a jiffy. I hope to see this SIZE and type of easy soaping mold at Christmas time,,,,when we need all the short cuts as possible,,,LOVE LOVE LOVE!!!
PRODUCT USED IN:   Soap - Melt & Pour, Hair Care
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• EVERYTHING
Chanda  • Utah

Date Submitted:  09/02/2014

I Recommend This Product!
"suprizingly versatile"
COMMENTS:  One of the few molds with a design that can be used for both genders,& different holiday & seasons .All just depending on the colors & scent of your choosing!
PRODUCT USED IN:   Soap - Melt & Pour
PO Box • Louisiana

Date Submitted:  06/10/2014

I Recommend This Product!
"Just beautiful soap!"
COMMENTS:  This was the first soap mold I ever used to make soap, and I was SO happy with the way it turned out! I am using these for favors for my wedding, and they will be perfect. The fleur de lis design is deep enough into each soap that it remains throughout use. The only reason I didn't give an "excellent" rating is because it was rather difficult to get each soap out of the mold. I was afraid that I was going to break them, but eventually they all came out, unbroken.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Beautiful design
• Make the design easier to unmold
Rebecca • Louisiana

Date Submitted:  03/25/2014

I Recommend This Product!
"Soap mold"
COMMENTS:  Living in Louisiana the fleur de Lis is very popular and this is one of my best sellers!

WSP Response:Thank you for your review! We do carry a single mold. It is a guest mold that makes (8) 0.65 ounce small round soaps or wax tarts. Many people like these because they can package them as a set of 2 or 3. Dimensions: 1.5" wide by 7/8" high. In case you are interested, it is called: Fleur de Lis Guest Soap Mold (MW 155)
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Very sturdy
• Design
• Have in single molds
Danielle • Kansas

Date Submitted:  05/20/2009

I Recommend This Product!
"Great Mold - Easy Release"
COMMENTS:  This is an incredible mold. It releases easily. I use red color with liquid Blue 1 to make lavender and then I add lavender and peppermint scent.
PRODUCT USED IN:  Bath Products
Elizabeth • Louisiana

Date Submitted:  05/24/2008

I Recommend This Product!
"Design really lasts"
COMMENTS:  My customers tell me that the design lasts a really long time because it it so thick. I love this mold!
PRODUCT USED IN:  Soap Products
ELIZABETH • Alabama

Date Submitted:  09/22/2003

I Recommend This Product!
"TOP SELLING DESIGN!"
COMMENTS:  THIS HAS BEEN A CONSISTENT TOP-SELLER FOR ME IN MY MOLDED BARS. IT IS A BEAUTIFUL MOLD, AND SO EASY. ONE OF MY FAVORITES IS TO SWIRL SOME CLEAR BASE INTO PLAIN WHITE IN THIS MOLD, AND ANOTHER IS TO COLOR SOME CLEAR BASE, FILL IN THE CAVITIES OF THE FLEUR DE LIS, THEN LET HARDEN FOR ABOUT 15-20 MINUTES. tHEN, SPRITZ WITH ALCOHOL, THEN POUR IN A SOLID WHITE OR ANOTHER COLOR OPAQUE SOAP BASE. HAS BEEN A HUGE HIT!
PRODUCT USED IN:  Soap Products
Customer Photos (0)
Charts & Calculators
 
 
Stay updated on sales, new products, free recipes, and more.
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Adding To An Order
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Site Feedback

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2019 Wholesale Supplies Plus, LLC - All Rights Reserved