Milky Way™ Floral Heart Soap Mold (MW 73) - Wholesale Supplies Plus
Current Processing Times: 3-5 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Hearts - (You Are Here - P9761)

Milky Way™ Floral Heart Soap Mold (MW 73)


Additional Information
This romantic design has lovely, flowing detail inspired by Victorian art. The Floral Heart Soap Mold is perfect for Valentine's Day or weddings.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 5 oz Bar Cavities: 3
Bar Depth: 1.25" Bar Length: 3.5"
Bar Width: 3" Max Temperature: 145ºF
Mold Capacity (oz): 15

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (0)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 0 Question(s) Shown Below

Recipes & Videos (0)
CustomerReviews (8)
Submit A Rating Average Customer Rating: (8 Reviews)

Deirdre • Illinois

Date Submitted:  04/14/2020

I Recommend This Product!
"Easy To Use"
COMMENTS:  I have this mold 4 stars because I just don’t like the fact that it’s plastic.(misread that part) But it’s very easy to unmold and is a generous size bar. I made lotion bars and thought I’d have to fight to get the bars out. But they slipped out in an hour the moment I turned the mold over. (So be certain to place a plate directly beneath it so you don’t drop your bars like I did) I recommend this mold because of it’s very easy use. I’ll try to make cold process soap with it next. I did let the formula cool to 125 degrees before pouring so as to avoid warping the mold. This was a GREAT suggestion in your description! Thx!!!
PRODUCT USED IN:   Lotion Bars & Sticks
• Easy to use
• Moderately priced
• Nice Big Cavity
• Plastic construction
• Wish it had more than 3 cavities
Barbara • North Dakota

Date Submitted:  09/10/2019

I Recommend This Product!
"Beautiful heart mold"
COMMENTS:  This is a good size bar of soap, and it is also beautiful. Haven't had a problem getting the soap out of the mold; after a few minutes in the freezer it pops right out. Am getting another!
PRODUCT USED IN:   Soap - Cold Process
• beautiful design
• large size bar
• sloped sides make soap pop out easily
Nancy • California

Date Submitted:  02/19/2019

I Recommend This Product!
"Very easy to use pretty mold!"
COMMENTS:  I Love this mold! Easy to use, releases easily! Can get creative with it, such as adding diffrent soap colors for flowers and leaves, doesn't have to be plain solid or marbled in color. Nice large bars! Definitely one of my favorite molds!
PRODUCT USED IN:   Soap - Melt & Pour
• Lg Size! Great shape!
• Ease of release!
• Nothing!
Agnes • New York

Date Submitted:  07/14/2016

I Recommend This Product!
"Makes a lovely bar of soap"
COMMENTS:  But be prepared, you'll need some elbow grease to unmold this one.
PRODUCT USED IN:   Soap - Melt & Pour
Rachelle • Colorado

Date Submitted:  01/15/2016

I Recommend This Product!
"AWWW... Pretty!"
COMMENTS:  Pretty mold for Valentines or Mother's Day. I would buy this again.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
• Perfect size
• Shape is good in hand
VICTORIA • Virginia

Date Submitted:  05/04/2015

I Recommend This Product!
"Love this mold!"
COMMENTS:  This has become one of my go-to molds. It's a simple shape with an intricate design and substantial size and weight. Easy to use and unmold, and makes an elegant, expensive-looking soap every time!
PRODUCT USED IN:   Soap - Melt & Pour
Charlotte  • Tennessee

Date Submitted:  02/20/2015

I Recommend This Product!
"Floral Heart mold"
COMMENTS:  I wasn't sure if I'd like this mold or not because I don't care for heart shaped things in general, but I really like it. It has more heft to it than the picture shows and more detail. It's a really nice mold. I want to get more.
PRODUCT USED IN:   Soap - Melt & Pour
• size
• detail
Judy • Illinois

Date Submitted:  01/28/2014

I Recommend This Product!
COMMENTS:  Beautiful heart design and perfect soap size!
PRODUCT USED IN:   Soap - Melt & Pour
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved