Crafter's Choice™ Gingerbread Man Column Silicone Soap Mold 2007 - Wholesale Supplies Plus
Current Processing Times: 3-4 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Gingerbread - (You Are Here - P10209)

Crafter's Choice™ Gingerbread Man Column Silicone Soap Mold 2007


Additional Information
Marry the gingerbread man soap made with this mold with a gingerbread fragrance for a merry and festive holiday soap! Embed fits in Crafter’s Choice Regular Loaf Silicone Mold 1501 and Rectangle Regular Column Silicone Soap Mold 2009.

Country Of Origin: China

Helpful Product Information:
Style: Column Avg. Bar Weight: 10 oz
Bar Cavities: 1 Bar Depth: 8.25"
Bar Length: 1.75" Bar Width: 1.5"
Max Pour Temperature: 135°F Max Temperature: 500ºF
Mold Capacity (oz): 10

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Close the mold by firmly pressing the edges together. For added safety, clamp the edges. Slowly pour melted soap no hotter than 130ºF into mold. Allow soap to harden then open mold and remove soap. Trim edges with a potato peeler or spatula. Embed soap into a loaf or slice into bars.

Cold Process Soap: Close the mold by firmly pressing the edges together, and clamp the edges. Slowly pour traced soap into mold. After at least 24 hours, open mold and remove soap with gloved hands. Trim edges with a potato peeler or spatula. Embed soap into a loaf or slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Hand wash mold in warm, sudsy water.
SDS & Documents
Questions & Answers (3)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 3 Question(s) Shown Below

Q Bubble
Posted By: Marie   |   April 07, 2017

"I need a bear mold to use as an embed for m&p soap. Does this resemble a bear when and it's taken out of the mold? It looks bear shaped but I'm not sure. Thank you. "

Q Bubble
Posted By: Renee   |   September 12, 2014

"How many oz of soap does this hold?"

Q Bubble
Posted By: brittny   |   September 12, 2014

"Are these molds safe for Hot Process Soapmaking?"

Recipes & Videos (1)
CustomerReviews (7)
Submit A Rating Average Customer Rating: (7 Reviews)

Melissa • New York

Date Submitted:  12/28/2020

I Recommend This Product!
"learning curve"
COMMENTS:  There is a bit of a learning curve with this mold, but once you know what you're doing it's great. I used it to make CP soap for a baby shower treat bag. I made a pink gingerbread soap column (the baby was a girl), let it set up overnight and made the rest of the batch the next day. I did not cut the gingerbread soap before the embed, I cut the finished soap with the embed at the same time. I turned out great and was a big hit at the shower. I never had a leak but there was some extra soap on the top and bottom from the seams that was not difficult to remove. I also have have the pine tree mold and love it too. The key to not having the mold distort is to use soap at a thicker trace, and then support the mold on the sides. I also have the pine tree mold and it makes a lovely column of soap as well.
PRODUCT USED IN:   Soap - Cold Process
• very adorable
• just the right size
• easy clean up
• i would love a "girl' version of this
Aimee • Kentucky

Date Submitted:  06/20/2018

I Recommend This Product!
"Works very well - Really Cute!"
COMMENTS:  makes perfect little gingerbread man embeds for rimmed or loaf soaps.
PRODUCT USED IN:   Soap - Melt & Pour
Joanna • New York

Date Submitted:  07/24/2016

I Recommend This Product!
"Love that"
COMMENTS:  My little gingerbread man soaps are so cute. The mold held together and after 2 hours peeled right out of the mold.
PRODUCT USED IN:   Soap - Melt & Pour
• size
• unmolding was easy
• added so much design to my soap
Karen • Washington

Date Submitted:  07/19/2016

I Recommend This Product!
"So Fun To Add Shapes Into Soaps"
COMMENTS:  I love all of the silicone column molds. It is kind of tricky when you first start using them as you have to make sure you have them well sealed all the way around, but once you master that, it is a breeze. I love putting them in my M & P loves for added character in my bars.
PRODUCT USED IN:   Soap - Melt & Pour
Helen • California

Date Submitted:  03/28/2015

I Recommend This Product!
COMMENTS:  This mold was easy to fill, I had no problem with the seams leaking as stated in the Heart mold. The first fill did bow a bit in the middle, so I waited for a bit thicker trace on the second attempt. It unmolds easily, and little clean up is needed after. I am deciding on which one to choose next:) I don't use colors, so I am using the vanilla content to my advantage, filling the mold with unscented soap and placing the white Gingerbread man in a soap that has a color or vise versa. The mold is shorter than my bar mold, so I cut the Gingerbread soap to the match the length up to the last bar. Not sure what I'm going to do with the little Gingerbread men pieces left over, but I'm sure I'll find something!!!
PRODUCT USED IN:   Soap - Cold Process
• Easy snap seams
• Easy to clean
• Very little trimming is needed.
• Wish it was just a tad bit longer.
YTS • Texas

Date Submitted:  01/29/2015

I Recommend This Product!
"great for Christmas or for children soaps"
COMMENTS:  It has the perfect size to use with the other embeds and the regular mold!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo
Carrie • Virginia

Date Submitted:  10/03/2014

I Recommend This Product!
COMMENTS:  I love love love these column molds! They make the soap look great and are easy to use! I hope they bring in more!!
PRODUCT USED IN:   Soap - Melt & Pour
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved