Visit Us – Pick Up Orders Save 10% (Read More)
Lead Times 2-4 Business Days FREE SHIPPING ~ On Orders Over $25*
 
 
Wholesale Supplies Plus
0
 
   
 
 
 
Molds All Molds Handmade & Savon - (You Are Here - P10399)

Milky Way™ Handmade Bar Soap Mold (MW 186)

Pricing
$9.56 for 1 Mold
$41.25 for 5 Mold
$95.95 for 20 Mold
$385.70 for 150 Mold



Additional Information
Show off those handmade soaps with a little bit of bragging! We’ll help you announce to the world all the work that went into your creations with this simple yet elegant mold. The Handmade Bar Soap Mold is designed in the popular oval shape for universal appeal and features the word “handmade” in a sweet, casual font.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 3.25 oz Bar Cavities: 4
Bar Depth: 1.125" Bar Length: 3.5"
Bar Width: 2.5" Max Temperature: 145ºF
Mold Capacity (oz): 13



This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (0)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 0 Question(s) Shown Below

Recipes & Videos (0)
CustomerReviews (9)
Submit A Rating Average Customer Rating: (9 Reviews)



tammie • Alabama

Date Submitted:  05/28/2019

I Recommend This Product!
"Perfect size"
COMMENTS:  Why didn't I order more molds when they were on sale? I guess I didn't think I would like these molds or maybe because I got so many molds I literally don't have room for one more. Whatever the reason I didn't buy more at the sale price, shame on me. I love these molds. They give perfect size bars, with the handmade bragging rights-- printed right on the bar of soap, BAM! So, why didn't I buy more when they were on sale? :( They are easy to release, just place them into the refrigerator for a about 2 0r 3 hours and they will pop right out.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• size
• easy to release
• handmade imprint
• price
Jill • Michigan

Date Submitted:  01/01/2017

"Hard to remove"
COMMENTS:  I have a slight problem getting my soaps out of these hard plastic molds, but the soaps have a professional look once you get them out. I still like my silicone rubber molds the best.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• The look
• Make them out of silicone instead!
Jennifer • Nevada

Date Submitted:  12/12/2016

I Recommend This Product!
"Beautiful Design"
COMMENTS:  Great for guest size soap. The only thing is because they are plastic, the soap has to harden for a couple days or more to be unmolded without ruining design. But they didn't crack as I unmolded so the plastic is pretty durable so far.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Design
• Durable
Bo  • North Carolina

Date Submitted:  10/26/2016

I Recommend This Product!
"good for a saling soap"
COMMENTS:  It's good for a saling soap. you don't need to tell people about your handmade soap. but it's little bit smaller than other regular soap mold.
PRODUCT USED IN:   Soap - Melt & Pour
Michael • Virginia

Date Submitted:  07/27/2016

I Recommend This Product!
"Adds variety to the shapes available"
COMMENTS:  Nice addition to the collection of molds. Gives another variety of bar shape that draws customer attention.
PRODUCT USED IN:   Soap - Melt & Pour
Broadway Acct • Texas

Date Submitted:  06/23/2016

I Recommend This Product!
"love it!"
COMMENTS:  fits in white soap box with square/rectangle window with microfiber face pad and biz card
PRODUCT USED IN:   Soap - Melt & Pour
Glynis • Massachusetts

Date Submitted:  03/26/2016

I Recommend This Product!
"Excellent Product??"
COMMENTS:  I just received and used today. It makes the best bars and release so easily. I loved them and so did my teenaged daughter.
PRODUCT USED IN:   Soap - Melt & Pour
sally • Florida

Date Submitted:  11/16/2015

I Recommend This Product!
"Perfect size"
COMMENTS:  Love the size of this mold. Great for a women's hand
PRODUCT USED IN:   Soap - Hot Process
CarolAnn • New Mexico

Date Submitted:  08/11/2015

I Recommend This Product!
"Handmade Bar Soap Mold 186"
COMMENTS:  This mold makes the prettiest bars. The design is so lovely. I am buying one after I have finally used the old one for the last time. I had that one for about 5 years and used it constantly. Just looks really cool to have the handmade imprint on such a pretty bar of soap. Please try this one. So nice.
PRODUCT USED IN:   Soap - Cold Process, Soap - Shampoo Bars, Lotion Bars & Sticks
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Unique.
• Handmade imprint.
Customer Photos (0)
Charts & Calculators
 
 
Stay updated on sales, new products, free recipes, and more.
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Site Feedback

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2020 Wholesale Supplies Plus, LLC - All Rights Reserved