Milky Way™ Handmade Guest Tray Soap Mold (MW 22) - Wholesale Supplies Plus
Current Processing Times: 3-5 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Handmade & Savon - (You Are Here - P9791)

Milky Way™ Handmade Guest Tray Soap Mold (MW 22)


Additional Information
Let your guests know that the soap they're using is made by you! The Guest Tray Handmade Soap Mold makes fifteen guest sized soaps.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Tray
Avg. Bar Weight: 2 oz Bar Cavities: 15
Bar Depth: 1" Bar Length: 2.5"
Bar Width: 1.5" Max Temperature: 145ºF
Mold Capacity (oz): 30

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (4)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 4 Question(s) Shown Below

Q Bubble
Posted By: Jennifer   |   January 02, 2019

"Would it be possible to make the soaps only 1oz ? "

Q Bubble
Posted By: Connie   |   December 01, 2017

"Hi, I just ordered this mold and I'm new to soap making. I am wondering if it is possible to make less bars at one time using this mold or do you have to make all 15 bars each time? Also, do you think it's possible to make let's say 3 bars of different colors all at the same time, so you'd end up with 3 bars each of 5 different colors? Thank you"

Q Bubble
Posted By: Trish   |   July 18, 2017

"Could this mold be used for wax?"

Q Bubble
Posted By: Jennifer   |   March 31, 2015

"Hi, could I get the dimensions of each bar that this mold makes? "

Recipes & Videos (1)
CustomerReviews (13)
Submit A Rating Average Customer Rating: (13 Reviews)

Amber • Florida

Date Submitted:  11/20/2017

I Recommend This Product!
"Awesome mold & SO CUTE!!!"
COMMENTS:  I think an addiction was born when I unmolded and cut my soaps this morning... I wanna buy SO MUCH MORE of these molds now!!!!! The soaps turned out so stinkin' CUTE!!!! Using this mold for CP was a breeze too! I was actually surprised by how easy it was! I finished pouring my soap around 10o'clock last night, and at 9:30 this morning, with a little steady guidance, it just popped right out... No coating the mold or freezing required! There's a little trick to it, and because this mold is clear, It's easy to see if the soap is ready to unmold. Just pull the sides away from the soap, and when you do, you'll notice the seal "breaking"... You can actually see it happening. Keep employing steady pressure as you gently pull from the sides, and as soon as you see the seal release fully, the soap will just slide right out! This process took less than 3 minutes, and the soaps are just adorable!! Best part... The mold released clean, and it's so durable, it can be used over and over again! Using sodium lactate at 3% in my recipe helped a lot too. I cannot wait to buy more of these super cute, affordable molds!!!
PRODUCT USED IN:   Soap - Cold Process
• Works great with CP!
• Soaps are so uniform & pretty!
• Durable, reusable & affordable!
• Absolutely NOTHING!
Dana • North Carolina

Date Submitted:  11/08/2017

I Recommend This Product!
"I love the mold"
COMMENTS:  This is just right size for guest soaps. I love that it has Handmade printed on the bars. Great product and highly recommend.
PRODUCT USED IN:   Soap - Melt & Pour
Nora • Arizona

Date Submitted:  09/11/2017

I Recommend This Product!
"Handmade guest tray"
COMMENTS:  Easy to unmold, nice size to sample and/or travel size
PRODUCT USED IN:   Soap - Melt & Pour
Christie • Kansas

Date Submitted:  12/11/2016

I Recommend This Product!
"Perfect size, will work great for samples"
COMMENTS:  This is the cutest little size mold. Its perfect for samples. I just love that it says handmade. I'll use this a lot. Its just perfect.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
• Great size
• Easy to use
• Price
• Nothing
Angie • New York

Date Submitted:  01/19/2016

I Recommend This Product!
"Nice for Sample Sizes"
COMMENTS:  I use this mold to make sample soaps to give away or sell at a very low price. Perfect size to get the product in customer's hands.
PRODUCT USED IN:   Soap - Melt & Pour
michelle  • Michigan

Date Submitted:  05/20/2015

I Recommend This Product!
"Great Product"
COMMENTS:  love the size, product releases easily. Great to work with!
PRODUCT USED IN:   Soap - Melt & Pour, Lotion Bars & Sticks
• Easy to work with
Jasmine • Delaware

Date Submitted:  03/14/2015

I Recommend This Product!
"Great for samples"
COMMENTS:  This mold is perfect to make a batch of soap and give it as 2oz soap samples to friends and family. When I bought it I did not realized what "tray mold" meant until I received it. At first I thought that the mold would have compartments and not much cutting needed. This does not bother me none since I have a nice soap knife I can use.
PRODUCT USED IN:   Soap - Melt & Pour
• size
tammie • Ohio

Date Submitted:  07/28/2014

I Recommend This Product!
"So Cute!"
COMMENTS:  These are adorable! Made of very thick plastic, so they should a while.
PRODUCT USED IN:   Soap - Melt & Pour
Gables Apartment • Florida

Date Submitted:  07/17/2014

I Recommend This Product!
"Used it same day it arrived!"
COMMENTS:  I love this mold. The bars come out itty bitty and are so cute. I already used it, same day it arrived, and already chopped up the bars to give out at work. I did a light blue tone with citrus basil scent for a refreshing morning scent and wow! There was no excessive elbow grease required to pop them out of the mold, just gentle taps and encouragement.
PRODUCT USED IN:   Soap - Melt & Pour
Tabitha • Pennsylvania

Date Submitted:  05/26/2014

I Recommend This Product!
"Nice size"
COMMENTS:  Makes a nice size for sample bars or prize bars.
PRODUCT USED IN:   Soap - Melt & Pour
• Bar size
Laura • North Carolina

Date Submitted:  05/15/2014

I Recommend This Product!
"Perfect for medicinal bars"
COMMENTS:  So far, I've used this for poison ivy relief soap and pine tar soap. The soap pops out of the mold easily and are perfect sized for medicine chest bars (or samples). I plan on using it for smaller (cheaper) bars for the customers that are reluctant to buy at first. Also, the indents for the "HANDMADE" isn't so deep that I cannot get HP soap in every cranny. Most of these molds are unusable for HP simply due to the nature of HP. Not so with this mold. Fill quickly, drop on the table a few times to get out air pockets, then run a bench scraper of the back to even it up.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
Patricia • California

Date Submitted:  04/21/2014

I Recommend This Product!
"Great for Lotion Bars"
COMMENTS:  I made lotion bars and these were perfect. I absolutely loved it. I have used them several times and they are still in good condition.
PRODUCT USED IN:   Lotion Bars & Sticks
Linda  • North Carolina

Date Submitted:  12/14/2013

I Recommend This Product!
"Will probably get several more of these"
COMMENTS:  Milky Way molds work well and hold up very well to repeated use. I have used this guest size mold so much especially here at the holidays. It makes nice consistent size soaps....15 all at one time which is awesome. For gifts and samples this has worked so well.
PRODUCT USED IN:   Soap - Melt & Pour
• Makes consistent soap sizes
• Easy to work with
• Very durable
Customer Photos (3)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved