Milky Way™ Handmade Soap Mold Tray (MW 15) - Wholesale Supplies Plus
WSP Latest News ~ COVID-19 Updates
Lead Times 8-10 Business Days FREE SHIPPING ~ On Orders Over $25*
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Handmade & Savon - (You Are Here - P3447)

Milky Way™ Handmade Soap Mold Tray (MW 15)

(19 Reviews)
Submit Your Own Review
$7.30 for 1 Mold
$31.45 for 5 Mold
$100.75 for 20 Mold
$404.99 for 150 Mold (Bulk)

Additional Information
What better way to advertise your soaps are handmade than by literally writing that on the bars? The Handmade Soap Mold Tray is effective and to the point. And with its decorative floral border, it’s pretty, too!

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Tray
Avg. Bar Weight: 4 oz Bar Cavities: 8
Bar Depth: 1.125" Bar Length: 3.75"
Bar Width: 2" Max Temperature: 145ºF
Mold Capacity (oz): 32

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below

Q Bubble
Posted By: Latoya   |   June 09, 2020

"Do you have the soap boxes for these?"

Recipes & Videos (0)
CustomerReviews (19)
Submit A Rating Average Customer Rating: (19 Reviews)

Michele • Illinois

Date Submitted:  06/29/2020

I Recommend This Product!
"Great Mold"
COMMENTS:  Great mold! Did two batches of cold process and key is to let dry 72 hours minimum because my recipe is high in olive oil. I ruined the first batch by being impatient! After testing on 2nd with no issues, I rebatched original one and used mold again. For rebatch it dried 4 full days and then put in freezer last few hours because it still clung to letters. It popped right out with light pressure on bottom and love the cutting lines. Size and shape of bar is perfect!
PRODUCT USED IN:   Soap - Cold Process
• Nice sized bars
• Easy cutting guides
• Well made & not flimsy
Holly • Illinois

Date Submitted:  06/10/2020

I Recommend This Product!
"Sturdy and fun!"
COMMENTS:  No complaints here! This mold is adorable and so sturdy and so easy to use and clean and I have nothing bad to say about this mold. So glad I got 2 of them because you can whip up a batch of soap in no time!
PRODUCT USED IN:   Soap - Melt & Pour
• Sturdy
• Easy to clean
• Nothing!
Amber • Florida

Date Submitted:  01/15/2018

I Recommend This Product!
COMMENTS:  I just love these affordable, cute molds!! My MW mold addiction began with the Handmade Guest Size mold and I loved it so much I had to have MORE!! Customers loved the fact the soaps clearly stated "Handmade", so naturally I had to get it in the bigger size bar too! Using these molds is so fun & easy, and unmolding has always been a breeze! I love that they're clear so you can tap out any air bubbles, and it makes unmolding easy also, as you can actually see the seal release before the soap just pops right out! This mold makes the cutest soaps, and is so durable, it can be used many times! My first MW mold has been through at least a dozen batches now & is still in perfect condition! Cleaning is super easy as well, and at such a great price, you can afford to try out multiple designs without going broke! I absolutely LOVE these molds!! If you want to add unique and fun designs to your product line, MW molds are the way to go!
PRODUCT USED IN:   Soap - Cold Process
• Ease of use & works great with CP!
• Affordable & very durable! Easy clean-up
• Makes the cutest designs!
Dawn • Minnesota

Date Submitted:  03/07/2016

I Recommend This Product!
"One of our favorite molds!"
COMMENTS:  This mold provides a nice size bar of soap, and it proclaims so nicely the fact that it is a homemade soap. We have several of the molds so we can make multiple batches in one day.
PRODUCT USED IN:   Soap - Cold Process
• sturdier plastic
Sheena • Georgia

Date Submitted:  02/02/2016

I Recommend This Product!
"so cute"
COMMENTS:  This handmade mold is perfect for melt & pour soap. The only complaint is that the soaps come out small and don't last long but it works well & the soaps have a perfect shape when done.
PRODUCT USED IN:   Soap - Melt & Pour
Angie • New York

Date Submitted:  01/19/2016

I Recommend This Product!
"Great Bar Size!"
COMMENTS:  I use this to make Gardener's Soaps and Mechanic's Soaps. Bar is a nice size.
PRODUCT USED IN:   Soap - Melt & Pour
Jill  • Massachusetts

Date Submitted:  04/28/2015

I Recommend This Product!
"Nice mold :)"
COMMENTS:  The bars from this mold sell well for me at craft fairs. Soap pops right out.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Jasmine • Delaware

Date Submitted:  03/14/2015

I Recommend This Product!
"Great for starters"
COMMENTS:  I needed a simple mold to get me started in MP Soaps. This is perfect and I do not have to try to figure out how much MP soap I need, just heat up all 2 lb of it. However does not work well if I only need to make 1/2 of the bars since it is a "tray mold" and not individually separated
PRODUCT USED IN:   Soap - Melt & Pour
• size
• design
• at least one divider to make 1 lb of MP
Alicia • Florida

Date Submitted:  02/21/2015

I Recommend This Product!
"Awesome "
COMMENTS:  Easy to use, easy to clean, made really cute bars
PRODUCT USED IN:   Soap - Melt & Pour, Lotion Bars & Sticks
Jesse • Florida

Date Submitted:  08/16/2014

I Recommend This Product!
"excellent mold"
COMMENTS:  I use these molds with my CP soap. They work great. I had a little trouble unmolding at first but once I figured out a good method, perfect bars every time! I leave the soap in the mold for 48-72 hours then loosen around the edge with a knife and set upside down in the sun for about 30 minutes...perfect release!
PRODUCT USED IN:   Soap - Cold Process
Andrea • Kentucky

Date Submitted:  05/15/2014

I Recommend This Product!
"Nice mold"
COMMENTS:  Loved loved loved this mold. Lets your customers that the item is homemade
PRODUCT USED IN:   Soap - Cold Process
Stacy • Maryland

Date Submitted:  04/22/2014

I Recommend This Product!
"Perfect! Perfect!"
COMMENTS:  I used this mold with the M&P soaps. They turned out so nice! It was easy to pop them out when they were done, and the mold left a 'cheat' line for cutting perfect size soap bars.
PRODUCT USED IN:   Soap - Melt & Pour
• The design
• Ease of use
Linda  • North Carolina

Date Submitted:  04/17/2014

I Recommend This Product!
"One of these was just not enough"
COMMENTS:  I already had one of these molds and decided I just had to have another one. I like that is makes 4 oz bars which is the size I shoot for in most soap batches. Also when the soap is something other than goat milk or olive oil,etc., this mold works nicely. I'm a fan of Milky Way molds and have had great success with them.
PRODUCT USED IN:   Soap - Melt & Pour
• Easy to use and good quality
• Easy to clean
• Makes a beautiful soap
Veronica • North Carolina

Date Submitted:  04/05/2014

I Recommend This Product!
"Homemade Mold"
COMMENTS:  This mold is perfect for the mp soap its really easy to use just spray with a little oil and pour the base. After the base cools and sets it pops right out! I really like that it makes the perfect bars to go into my gift baskets!
PRODUCT USED IN:   Soap - Melt & Pour
Sandy • Missouri

Date Submitted:  12/09/2013

I Recommend This Product!
"My favorite mold! "
COMMENTS:  I love this mold. The one word on it makes each bar seem significant and gift ready, instead of just a rectangle bar of soap. I also love pouring the entire batch at once. I never seem to fill the holes with the same amount as each other when I use the silicone molds. Clean up with this tray mold is as easy as silicone and I have no difficulties getting the soap to release.
PRODUCT USED IN:   Soap - Melt & Pour
Irene • West Virginia

Date Submitted:  11/20/2013

I Recommend This Product!
"Making soap"
COMMENTS:  This soap mold makes a very nice size bar of soap. It was very easy to unmold my MP soaps and my HP soaps.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Hot Process
Lisa • Florida

Date Submitted:  08/23/2013

I Recommend This Product!
COMMENTS:  Used the tray for M&P so far and love it..nice size bar..
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Ann • New Jersey

Date Submitted:  12/26/2007

I Recommend This Product!
COMMENTS:  This is a perfect size for a 2lb block of M&P soap.. I used WSP's "Silk & Shea" Base and it set up beautiful! Soap did not stick, very easy release. I am very happy with this mold.
PRODUCT USED IN:  Soap Products
Mindy • Illinois

Date Submitted:  06/17/2004

I Recommend This Product!
"Hot process soap"
COMMENTS:  I used this mold the first time I made hot process soap. It was flexible and firm, not flimsy or weak. I sprayed it with olive oil from a mister, not cooking spray. I had to press my soap mix into the design as it was a bit thick. My soap released easily 24 hours later.
PRODUCT USED IN:  Soap Products
Customer Photos (3)
Charts & Calculators
Stay updated on sales, new products, free recipes, and more.

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2021 Wholesale Supplies Plus, LLC - All Rights Reserved