WSP Latest News ~ COVID-19 Updates
Lead Times 8-10 Business Days FREE SHIPPING ~ On Orders Over $25*
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Hearts - (You Are Here - P9770)

Milky Way™ Hearts Floral Guest Soap Mold (MW 44)

$6.95 for 1 Mold
$29.95 for 5 Mold
$95.95 for 20 Mold
$385.70 for 150 Mold (Bulk)

Additional Information
Can’t decide what kind of heart soap you like best? Try them all! This Hearts Floral Guest Soap Mold offers five beautiful options, including some with vines, flowers, and frames.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 1.75 oz Bar Cavities: 5
Bar Depth: 0.75" Bar Diameter: 2
Bar Length: 2" Bar Width: 2"
Max Temperature: 145ºF Mold Capacity (oz): 8.75

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below

Q Bubble
Posted By: LaceNWhimsy   |   January 27, 2014

"What are the individual finished dimensions of these soaps?"

Recipes & Videos (0)
CustomerReviews (15)
Submit A Rating Average Customer Rating: (15 Reviews)

celestial  • Texas

Date Submitted:  02/13/2018

I Recommend This Product!
"I use this for melt and pour soap "
COMMENTS:  Beautiful design, lil smaller than I expected and hard to remove soap
PRODUCT USED IN:   Soap - Melt & Pour
• beautiful design
• the middle heart is difficult to remove
Heika • Oregon

Date Submitted:  01/31/2018

I Recommend This Product!
"Fantastic mold, but incorrect weight"
COMMENTS:  I am using this mold to make lotion bars, and it is really great. I saw a review saying the mold warps above 110 degrees, but I have been pouring hot beeswax and oils at about 150 degrees with no warping at all. The lotion bars are really easy to unmold! I just turn the mold over, and they fall right out. My only complaint, and it is minor, is that the weight listed for these molds says that the bars are 1.75 ounces. I used that weight measure to formulate my recipe, and ended up with a LOT more bars than I expected. A correct weight for these little molds is about 1.05 ounces, so you may want to take that into account when you are making your calculations.
PRODUCT USED IN:   Lotion Bars & Sticks
• Nice detail, sturdy mold, easy unmolding
• Weight is incorrectly listed for bars.
M.M.  • South Dakota

Date Submitted:  07/29/2017

I Recommend This Product!
"Pretty Designs "
COMMENTS:  I found it difficult to use with M&P because I prefer silicone molds as silicone releases the soap easily. However, It does work well for small bath bombs as the designs are pretty. I package 3 different scents/colors in a cello bag with a pretty ribbon. Gives customers a chance to try multiple scents. These work well for bath melts or lotion bars too. Also nice for samples.
PRODUCT USED IN:   Soap - Melt & Pour, Bath Fizzies & Salts, Lotion Bars & Sticks
Mary • New York

Date Submitted:  06/11/2017

I Recommend This Product!
COMMENTS:  Great little mold for sample size soaps and gift sets, so cute and lovely detail!
Elisabeth • Missouri

Date Submitted:  06/09/2017

I Recommend This Product!
"Very Nice"
COMMENTS:  This mold is really nice and easy to use. Very sturdy
PRODUCT USED IN:   Soap - Cold Process
Lisa • Utah

Date Submitted:  03/08/2017

I Recommend This Product!
"Nice Mold"
COMMENTS:  I initially purchased this for lotion bars, but have been making cp in them. Very pretty design. Can't wait to purchase some more.
PRODUCT USED IN:   Soap - Cold Process, Lotion Bars & Sticks
Sabrina • Kansas

Date Submitted:  12/09/2016

I Recommend This Product!
COMMENTS:  Works great. I mainly use to give that decorative touch to lotion bars.
PRODUCT USED IN:   Lotion Bars & Sticks
Janice • New Jersey

Date Submitted:  05/07/2016

I Recommend This Product!
"OK mold"
COMMENTS:  Nice heart design. Slow on release.
PRODUCT USED IN:   Soap - Cold Process
• Nice design
• Need quicker release
Theresa • Tennessee

Date Submitted:  03/31/2016

I Recommend This Product!
"Makes great guest products"
COMMENTS:  This mold makes just the right size guest soaps and bath boms .
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Bath Fizzies & Salts
• Everythin
• Nothing
Mary • California

Date Submitted:  12/03/2015

I Recommend This Product!
"Hearts Floral Guest Soap Mold (MW 44)"
COMMENTS:  This is the best mold for the little bit of soap left over from my pours. Then I wrap them up for gifts.
PRODUCT USED IN:   Soap - Melt & Pour
Jessica • Florida

Date Submitted:  07/30/2015

I Recommend This Product!
"Shower Fizzies"
COMMENTS:  This is a nice shape and size to use for our shower fizzing tablets. Thank you!
PRODUCT USED IN:   Bath Fizzies & Salts
Bradley • Turks and Caicos Islands

Date Submitted:  02/24/2015

I Recommend This Product!
COMMENTS:  Used this mold for Valentines themed lotion bars. They unmolded very easily. For packaging I used the 2 oz. tins. If you don't fill the molds until the very top, the bars will just fit into the 2 oz tins (height wise).
PRODUCT USED IN:   Lotion Bars & Sticks
veronica • Texas

Date Submitted:  02/08/2015

I Recommend This Product!
"easy release"
COMMENTS:  Worked great on my lotion bars. Turn the mold upside down and there out.
PRODUCT USED IN:   Lotion Bars & Sticks
• Easy to use
• price
Barbara • Texas

Date Submitted:  12/14/2014

I Recommend This Product!
"adorable in a small gift bag!"
COMMENTS:  I sell a $5 gift bag including a small lotion (amenity 1.65oz set), face pad or loofa, and a clear poly bag with 2 cute soaps. This mold is a great size and shape! The only thing to really be cautious of is the heat at which you pour the melted soap into the mold at. Anything much more than 110*F warps plastic molds. I cut the molds into individual cavities because I make batches of about 3-5 lbs of soap at a time. Have a care for the sharpness of the cut edges, and make sure that there is a 1/3-1/2 inch lip to make popping the soaps out easier, but this way at least makes it easier to pack together a bunch of different molds from a large soap batch onto a cold tray and refrigerate.
PRODUCT USED IN:   Soap - Melt & Pour
• size, shape, oz
• heat resistance
Judy • Illinois

Date Submitted:  04/25/2014

I Recommend This Product!
"Nice size"
COMMENTS:  Perfect size and great for the bath!
PRODUCT USED IN:   Soap - Melt & Pour
Customer Photos (0)
Charts & Calculators
Stay updated on sales, new products, free recipes, and more.

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Site Feedback


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2020 Wholesale Supplies Plus, LLC - All Rights Reserved