WSP Latest News ~ COVID-19 Updates
Lead Times 7-9 Business Days FREE SHIPPING ~ On Orders Over $25*
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Dragonfly & Lady Bugs - (You Are Here - P6091)

Milky Way™ Lady Bug Soap Mold (MW 399)

$6.95 for 1 Mold
$29.95 for 5 Mold
$95.95 for 20 Mold
$385.70 for 150 Mold (Bulk)

Additional Information
Ladybugs are thought to bring luck where they land. The Lady Bug Soap Mold will hopefully bring luck to others as your handmade soaps land on their soap dishes!

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 3.35 oz Bar Cavities: 3
Bar Depth: 1.25" Bar Length: 3"
Bar Width: 3" Max Temperature: 135ºF

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below

Q Bubble
Posted By: Victoria   |   January 28, 2019

"Can i fit this in any of your tins and which one if it is possible "

Recipes & Videos (0)
CustomerReviews (4)
Submit A Rating Average Customer Rating: (4 Reviews)

Pamela • Pennsylvania

Date Submitted:  07/02/2019

I Recommend This Product!
"Love the detail in this Ladybug Mold!"
COMMENTS:  I had a request use this design for treats at a Dinner Party. It's very cute! As with all the Milky Way Molds the soap is very easy to pop out. I always sit mine in the fridge for a few minutes, then on the counter a few minutes before releasing. I think that makes it easier for the soap to pop out.
PRODUCT USED IN:   Soap - Melt & Pour
• Easy to use!
• Very cute!
Karen • Washington

Date Submitted:  09/10/2017

I Recommend This Product!
"So Cute!"
COMMENTS:  The little bugs are just adorable and I love the bar size.
PRODUCT USED IN:   Soap - Melt & Pour
LeeAnn • Colorado

Date Submitted:  06/27/2016

I Recommend This Product!
"Easy to release mold"
COMMENTS:  Lovely mold! Great detail and easy to un-mold. I used these molds with WSP Detergent Free M & P Soap base, the key is to let the soaps sit in the molds at least 12 hours. I then heated the top of the mold with my heat gun set on "Low". Lady Bugs slipped right out.
PRODUCT USED IN:   Soap - Melt & Pour
• easy to unmold
• great detail
• durable mold
lovetosoap • Utah

Date Submitted:  06/13/2016

I Recommend This Product!
"Just as Pictured"
COMMENTS:  This is such a cute little mold, and I'm excited to use it at my family reunion for the kid's craft project.
PRODUCT USED IN:   Soap - Melt & Pour
• Very sturdy material
• Great detail
Customer Photos (0)
Charts & Calculators
Stay updated on sales, new products, free recipes, and more.

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Site Feedback


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2021 Wholesale Supplies Plus, LLC - All Rights Reserved