We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Bamboo symbols are often found in Chinese, Japanese and Indian culture to represent luck, longevity, strength, and friendship. The Tray Bamboo Leaves Soap Mold features beautifully detailed leaves in a tray that makes six rectangular bars.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Helpful Product Information:
Material: Plastic
Style: Tray
Bar Cavities: 6
Bar Length: 3"
Bar Width: 2.25"
Bar Depth: 1"
Avg. Bar Weight: 4 oz
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: I used this tray along with the Bamboo Teak fragrance oil. I used the recipe that is listed along with the mold (tweaked the recipe a bit for the ingredients I already had on hand). Everything came out great! I love the detail on the soap from the mold.
PRODUCT USED IN: Soap - Cold Process
Theresa • Tennessee
Date Submitted: 03/14/2017
I Recommend This Product!
"Nice"
COMMENTS: This mold is smaller than I expeceted but makes beautiful soaps
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process, Soap - Shampoo Bars
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• The design
• I would like it a little bigger,8 bars
Show more
Customer Photos
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Crafter's Choice
Elements Bath and Body
Just Scent
Rustic Escentuals
Plastic & Silicone Molds
Featured Collections
Molds By Material
Retired Soap Molds
See customer photos
Product Details
Have more questions? See Q&A
Recipes & Videos (1)
Questions & Answers (1)
Customer Reviews (2)
Customer Photos
Charts & Calculators
