Milky Way™ Oliva Soap Mold (MW 124) - Wholesale Supplies Plus
WSP Latest News ~ COVID-19 Updates
Lead Times 3-5 Business Days FREE SHIPPING ~ On Orders Over $25*
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Olive Oil - (You Are Here - P9835)

Milky Way™ Oliva Soap Mold (MW 124)

$6.95 for 1 Mold
$29.95 for 5 Mold
$95.95 for 20 Mold
$385.70 for 150 Mold (Bulk)

Additional Information
There’s no better way to advertise your olive oil soap than with Olio di Oliva right on the bar. Along with a beautiful olive branch as decoration, our Oliva soap mold is perfect for handmade olive oil soaps.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 3 oz Bar Cavities: 4
Bar Depth: 1.5" Bar Length: 3.75"
Bar Width: 2.25" Max Temperature: 145ºF
Mold Capacity (oz): 12

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (0)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 0 Question(s) Shown Below

Recipes & Videos (1)
CustomerReviews (4)
Submit A Rating Average Customer Rating: (4 Reviews)

Shari • Indiana

Date Submitted:  03/07/2018

I Recommend This Product!
"Milky Way™ Oliva Soap Mold (MW 124) "
COMMENTS:  A very nice mold to use for batch overflow excess. I typically wash in dishwasher and grab out of washer before the heated dry mode... but this one time I got distracted, oops! I wash my Milky Way molds all by hand now! LOL I highly recommend.
PRODUCT USED IN:   Soap - Cold Process, Soap - CPOP, Soap - Hot Process
Alison • Pennsylvania

Date Submitted:  04/04/2017

I Recommend This Product!
COMMENTS:  I used this with the Olive Leaf and Fig soap recipe. It came right out of the mold, and the soap is beautiful! Very detailed, and makes my Italian father smile.
PRODUCT USED IN:   Soap - Cold Process
Sharon  • Nevada

Date Submitted:  01/04/2015

I Recommend This Product!
"Oliva Soap Mold (Plastic)"
COMMENTS:  I really like silicone molds for their soap releasing abilities. Most plastic molds take a little more time getting the soap out of the mold due to the stiffness of the plastic, but this mold worked great! The soap released easily and the design is intricate making a really beautiful soap. Plan to use this many more times.
PRODUCT USED IN:   Soap - Melt & Pour
• Intricate design
• Ease of release from a plastic mold
• Eye appeal
CHRISTY • California

Date Submitted:  12/21/2013

I Recommend This Product!
PRODUCT USED IN:   Lotion Bars & Sticks
Customer Photos (1)
Charts & Calculators
Stay updated on sales, new products, free recipes, and more.

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2021 Wholesale Supplies Plus, LLC - All Rights Reserved