Milky Way™ Pineapple Fruit Soap Mold (MW 417) - Wholesale Supplies Plus
Current Processing Times: 3-5 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Fruit - (You Are Here - P2874)

Milky Way™ Pineapple Fruit Soap Mold (MW 417)


Additional Information
This tropical mold is oval shaped with a whole pineapple on top. Pairs perfectly with any of our pineapple fragrance oils!

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 5 oz Bar Cavities: 3
Bar Depth: 1.5" Bar Length: 4.3"
Bar Width: 2.5" Max Temperature: 135ºF

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below

Q Bubble
Posted By: Daina   |   June 14, 2017

"Is this for 1 mold? The description says one mold but then it says 3 cavities. Thanks"

Recipes & Videos (1)
CustomerReviews (3)
Submit A Rating Average Customer Rating: (3 Reviews)

Josephine • California

Date Submitted:  06/13/2019

I Recommend This Product!
"Pineapple Soap Mold - LOVE IT!"
COMMENTS:  Everyone i show this soap to falls in love with it. I’m going to have this soap for purchase all year around. It’s so cute and quite large for its size!
PRODUCT USED IN:   Soap - Melt & Pour
• Great detail
• Large size
Karen • Washington

Date Submitted:  09/10/2017

I Recommend This Product!
"Very Cool Mold"
COMMENTS:  I had a custom order for a couple who were having pineapples as their theme for their wedding and wanted a nice size soap to set at each persons table setting to use as a decoration as well as a Thank-You gift for coming to the wedding. THEY LOVED THESE SOAPS! Not too big but not too small.
PRODUCT USED IN:   Soap - Melt & Pour
• Size
kris • Florida

Date Submitted:  03/06/2017

I Recommend This Product!
"Pineapple Fruit Soap mold MW417"
COMMENTS:  Sturdy hard plastic. Nice 5 oz sized soaps. Have used for MP and for cold process. I put mold in freezer prior to unmolding for CP and they came out of mold very easily.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved