WSP Latest News ~ COVID-19 Updates
Lead Times 5-7 Business Days FREE SHIPPING ~ On Orders Over $25*
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Basic - Pattern Designs - (You Are Here - P964)

Milky Way™ Pinwheels Guest Soap Mold (MW 325)

$6.95 for 1 Mold
$29.95 for 5 Mold
$95.95 for 20 Mold
$385.70 for 150 Mold (Bulk)

Additional Information
Create pretty pinwheel soaps for your guests using the Pinwheels Guest Soap mold! Featuring two slightly different designs that were inspired by pinwheels.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Swirl 1: 2 ounces, 2.75" x 1", 2 cavities
Swirl 2: 1.95 ounces, 2.5" x 1", 3 cavities

Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 2 oz Bar Cavities: 5
Bar Depth: 1" Bar Length: 2.6"
Bar Width: 2.6" Max Temperature: 135ºF

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below

Q Bubble
Posted By: Nadine    |   December 09, 2018

"Hi, what is the diameter of each bar?"

Recipes & Videos (1)
CustomerReviews (5)
Submit A Rating Average Customer Rating: (5 Reviews)

jeretta • Kentucky

Date Submitted:  05/02/2019

I Recommend This Product!
"instructions in the kit were easy to follow. "
COMMENTS:  i really liked this kit. everything included to make great pinwheels body bombs. instructions where detailed but easy to follow. had alot of fun making them. every bomb turned out perfect. the plastic bags and ties were included. the scent included volcano smelled great...
PRODUCT USED IN:   Bath Fizzies & Salts
• everything
• nothing
Janey • Washington

Date Submitted:  05/22/2018

I Recommend This Product!
"Good for Bath Bombs"
COMMENTS:  Love this mold for bath bombs. It works well for my masculine scents. The shape shrink wraps well- no sharp corners. I fill one at a time, press hard with hand, turn over and tap with a table knife. Works every time!
PRODUCT USED IN:   Soap - Melt & Pour, Bath Fizzies & Salts
• The shape
• The rigidity
Kristina • Missouri

Date Submitted:  05/27/2008

I Recommend This Product!
"FAB Lotion Bar Mold!"
COMMENTS:  I use this mold for a fabulous lotion bar which I place in a metal tin with clear window. Makes a LOVELY presentation! And the ridges on the mold make the lotion bar rub easily onto the skin. PERFECT!
PRODUCT USED IN:  Other Products
Monica • New York

Date Submitted:  06/28/2006

I Recommend This Product!
"Very Nice"
COMMENTS:  Makes a great looking bath cookie.
PRODUCT USED IN:  Bath Products
Jill • Ohio

Date Submitted:  11/29/2005

I Recommend This Product!
"very easy"
COMMENTS:  This mold is very cute with out much work - looks great with a bit of sparkle in a clear base
PRODUCT USED IN:  Soap Products
Customer Photos (0)
Charts & Calculators
Stay updated on sales, new products, free recipes, and more.

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Site Feedback


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2020 Wholesale Supplies Plus, LLC - All Rights Reserved