We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Welcome to the new home for
Elements Bath & BodyRustic EssentualsJust ScentCrafter's ChoiceMake Your Own.buzz
Elements Bath & Body Rustic Essentuals Just Scent Crafter's Choice Make Your Own.buzz
products are now exclusively available on Wholesale Supplies Plus.
The classics never go out of style and our Rectangle soap mold is always a true and trusty standby.
Milky Way® Molds are constructed of plastic and have angled sides for easier soap removal. The dimensions listed are for the largest sides. The bottom of each cavity will be slightly smaller than the dimensions listed.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Helpful Product Information:
Material: Plastic
Style: Bar
Bar Length: 3.25"
Bar Width: 2.25"
Bar Depth: 1"
Max Temperature: 135ºF
Avg. Bar Weight: 3.75 oz
Bar Cavities: 4
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does not need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does not need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: As always: an excellent mold. I'm now the proud owner of quite a few of these basic rectangles. They're the first soap molds I ever bought, and I still use them all the time. One of the nicest things about this mold for melt and pour, is how easy this shape is to wrap!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Quality - always consistent • Strength & balance of the mold
Linda • Arkansas
Date Submitted: 09/12/2016
"Individual Rectangle Bars of M&P"
COMMENTS: I gave this an "average" review because the description and picture do not reflect that what would be considered the "bottom" of the soap mold is not as large as the "top" (i.e., the bottom is not 2.25 X 3.5). Since I use these molds to create soaps with "paper embeds" that are made to size, it will not work. I would have to make the embed much smaller and the graphics do not show up well when you make them that much smaller. The description needs to reflect this; I did send a message as to this problem and received no response. Also, this rectangle mold used to be made in the "heavy duty white plastic" that held up well; this one is made with the "clear plastic" and is not as heavy duty. I rely on descriptions being accurate and am not pleased when they are not. I have been purchasing from WSP for many years and appreciate the ability to do so.
WSP Response:
Thank you for bringing this to our attention. We are updating the information for this mold to reflect the correct size. The white mold that you referenced was a different manufacturer not a Milky Way mold. Milky Way molds have always been in a clear plastic.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Description of Mold
Show more
Customer Photos
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!