Visit Us – Pick Up Orders Save 10% (Read More)
Lead Times 1-3 Business Days FREE SHIPPING ~ On Orders Over $25*
 
 
Wholesale Supplies Plus
0
 
   
 
 
 
Molds All Molds Basic - Smooth Designs - (You Are Here - P10210)

Crafters Choice™ Round Regular Column Silicone Soap Mold 2008

Pricing
$35.08 for 1 Mold
$147.78 for 5 Mold
$1206.33 for 46 Mold



Additional Information
Craft circular soap faster with this column soap mold. Once soap has hardened, remove from the mold and slice into bars. You can also embed smaller soap columns into this mold; fancy designs made simple!

Country Of Origin: China

Helpful Product Information:
Style: Column Avg. Bar Weight: 31 oz
Bar Depth: 8.25" Bar Diameter: 2.75
Bar Length: 2.75" Bar Width: 2.75"
Max Pour Temperature: 135°F Max Temperature: 500ºF
Mold Capacity (oz): 31



This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Close the mold by firmly pressing the edges together. For added safety, clamp the edges. Support the mold with two flat objects such as two mitre boxes on their sides. Slowly pour melted soap no hotter than 130ºF into mold. Allow soap to harden then open mold and remove soap. Trim edges with a potato peeler or spatula then slice into bars.

Cold Process Soap: Close the mold by firmly pressing the edges together, and clamp the sides. Support the mold with two flat objects such as two mitre boxes on their sides. Slowly pour traced soap into mold. After at least 24 hours, remove soap from mold with gloved hands. If desired, trim edges with a potato peeler or spatula. Slice into bars and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Hot Process Soap: Close the mold by firmly pressing the edges together, and clamp the sides. Scoop hot process soap into mold. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Open mold and remove soap loaf. If desired, trim edges with a potato peeler or spatula. Slice into bars.

Care:
Hand wash mold in warm, sudsy water.
SDS & Documents
Questions & Answers (3)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 3 Question(s) Shown Below



Q Bubble
Posted By: Jacalyn   |   January 12, 2015

"Are these TWO 3/4 "molds for $22.26 or ONE 2 and 3/4 " mold for $22.26?"




Q Bubble
Posted By: Angela   |   October 13, 2014

"It is difficult to see from the photo(s) provided whether or not this silicone column mold comes with silicone end caps. What holds these "halves" together while pouring soap into them? Do you have any plans to provide a full 3" diameter silicone column mold and perhaps a little longer length?"




Q Bubble
Posted By: pam   |   September 25, 2014

"Is good to use w CP soap and if so how easy is it to remove? How many pounds or ozs of soap is this good for?"


Recipes & Videos (5)
CustomerReviews (14)
Submit A Rating Average Customer Rating: (14 Reviews)



Loraine • Pennsylvania

Date Submitted:  02/01/2018

"Just an OK product"
COMMENTS:  I watched the video, reinforced the sides and clamped it shut but oh those seams, I really don't like having to shave the soap in hopes of a perfect bar and it was more work than using the pvc pipe mold. I've since decided to use this mold for my lined round bars. Possibly an item that could be re-tooled or offer lining sheets to go with it.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• just the right size for round bars
• tighter fit, invisible seams
Tracy • Ontario

Date Submitted:  09/05/2017

I Recommend This Product!
"Love this mold"
COMMENTS:  I use this mold for my shave soap. it works nicely and makes a perfectly round bar of soap. easy to use. just don't tamp down to hard or too many times or soap seeps out side seal. I use thick clips to hold sides together firmly - just in case.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• easy to use
• soap stays nice and round
Conrad • Colorado

Date Submitted:  01/30/2017

I Recommend This Product!
"Works great! Bye Pringle can"
COMMENTS:  Works great. unmolding beautifully
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Brittany • Kentucky

Date Submitted:  12/01/2016

I Recommend This Product!
"Circle column mold!!"
COMMENTS:  Absolutely love this mold. My round soaps look so much better!
PRODUCT USED IN:   Soap - Hot Process, Soap - Shave Shampoo
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• It doesn't leak
• Easy to use
• Almost to small
Deborah • Connecticut

Date Submitted:  11/02/2016

"Almost "
COMMENTS:  I am going to keep trying with this one. It could be a user error, or just the way it was manufactured. I had a side seam that was not easily removed and it bulged ever so slightly so it was not a perfect round circle. Back to the PVC pipes and pringles cans for now lol
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• concept
• silicone
• pull apart to open
• side seam issue
• more side reinforcement
Lisa • Mississippi

Date Submitted:  10/26/2016

I Recommend This Product!
"Good but not perfect"
COMMENTS:  This is a decent, sturdy mold but I find that the seems are not as clean as they could be.
PRODUCT USED IN:   Soap - Melt & Pour
Joan • Delaware

Date Submitted:  05/24/2016

"Round regular column cylinder mold"
COMMENTS:  This is real hard for me to get the soap out of the mold even tho I am following the directions. I even watched a you tube video and still needed help.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Shape
• An easier way to unmold
misty • Ohio

Date Submitted:  04/04/2016

I Recommend This Product!
"Round silicone soap mold"
COMMENTS:  I loved this, it was east to fill and easy to get my soap out and clean! The only thing about it that was "wrong" was that the sides had a line where the mold closed, but it wiped away easy enough!!
PRODUCT USED IN:   Soap - Cold Process
Becky • Utah

Date Submitted:  04/04/2016

I Recommend This Product!
"Love this mold"
COMMENTS:  We have been using Pringles cans to make our shave bar soaps but then I found this and I love it. It doesn't leak or anything. It is perfect. Now I don't have to use the Pringles cans.
PRODUCT USED IN:   Soap - Cold Process
Shana • Georgia

Date Submitted:  03/17/2016

I Recommend This Product!
"Nice Sturdy Mold"
COMMENTS:  I really like this mold, one I don't have to fight to push my soap out...very easy release. It's sturdy and secure I've made many batches of soap with no leaking even pouring a thin trace and I've using this for a year! I just wish it was a little longer. You can't beat the price for an easy to use mold that gives you beautifully round soap!
PRODUCT USED IN:   Soap - Cold Process
weimarmama • Alabama

Date Submitted:  11/02/2015

I Recommend This Product!
"Perfect!"
COMMENTS:  Love this mold! It's perfect for shaving and facial bars, and so much easier to use and unmold than the pvc pipe that I was using. In fact, planning on ordering a second one.
PRODUCT USED IN:   Soap - Cold Process, Soap - Shave Shampoo
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Easy to use
Debbie • Missouri

Date Submitted:  07/02/2015

I Recommend This Product!
"Right size for Shaving Soaps"
COMMENTS:  I use this mold to make my round shaving disks. It's just the perfect size. I love that I don't have to line this mold before pouring in the cp soap batter. The soap pops right out.
PRODUCT USED IN:   Soap - Cold Process
YTS • Texas

Date Submitted:  02/01/2015

I Recommend This Product!
"I love this pillar molds"
COMMENTS:  I love this pillar molds all of them make a great inbed!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Shave Shampoo
Tasha • Ohio

Date Submitted:  01/23/2015

I Recommend This Product!
"Very sturdy!"
COMMENTS:  It's extremely sturdy and the sides seem to stay together perfectly on their own to form a water tight seal. I am using binder clips on the sides just for my own peace of mind... the way these fit together, I highly doubt they will leak. I am using for CP soap - wrap with a towel to gel and you're set!
PRODUCT USED IN:   Soap - Cold Process
Customer Photos (0)
Charts & Calculators
 
 
Stay updated on sales, new products, free recipes, and more.
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Adding To An Order
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Site Feedback

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2019 Wholesale Supplies Plus, LLC - All Rights Reserved