We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Gumballs? Marbles? Nope, the small balls made from this mold are soap! Use this mold to create embeds for a gumball soap loaf or use them as decorative accents.
Common Uses:
Melt & Pour Soap (MP). Cold Process Soap (CP). Cold Process Oven Process Soap (CPOP). Hot Process Soap (HP). Lotion Bars.
Points of Interest:
Maximum Temperature: 500ºF
Manufacturer: Crafter’s Choice®
Material: Silicone
Country of Origin: China
Country Of Origin: China
Helpful Product Information:
Style: Bar
Avg. Bar Weight: 0.6 oz
Bar Cavities: 18
Bar Depth: 1.25"
Bar Diameter: 1.25"
Bar Length: 1.25"
Bar Width: 1.25''
Max Temperature: 500ºF
Mold Capacity (oz): 10.8
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Solid Lotion: Pour melted lotion mixture into mold cavities. Allow mixture to solidify. Carefully remove solid lotion from mold by gently pulling the sides away from the solid lotion, and then push on the bottom of the mold until the solid lotion starts to release. Grab hold of solid lotion and carefully pull out of mold.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: Words great, perfect size for my soap samples in both CP and MP, great for embeds. My 4 star rating is due to price point...I really feel it is a bit over priced for just one. Very sturdy, cleans well.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Price Point
SoapBunny • Peru
Date Submitted: 05/30/2017
I Recommend This Product!
"Love it!!!!!"
COMMENTS: That mold is the ultimate! Super practical and necessary. It's a mold that you have to have!
PRODUCT USED IN: Soap - Melt & Pour
Jessica • Hawaii
Date Submitted: 05/08/2017
I Recommend This Product!
"Sample bath bomb molds"
COMMENTS: This product was great for making tester bath bombs but I wish it were easier to get them out of the molds.
PRODUCT USED IN: Bath Fizzies & Salts
Christie • Georgia
Date Submitted: 02/15/2017
I Recommend This Product!
"Love it"
COMMENTS: Perfect Round Ball.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Etosha • Georgia
Date Submitted: 01/18/2017
I Recommend This Product!
"Big Balls"
COMMENTS: Love these Balls! So easy to play with!
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Jeanette • Maryland
Date Submitted: 10/04/2016
I Recommend This Product!
"Nice and durable!"
COMMENTS: The mold is sturdy, really well made and did the job just like it said! I made the cutest little bath melts from a recipe I found on WSP. The finished product came out awesome. I am planning on ordering another mold just like it.
PRODUCT USED IN: Bath Fizzies & Salts
Barbara • Oregon
Date Submitted: 09/30/2016
I Recommend This Product!
"Great for embeds"
COMMENTS: Works great for embeds and toppers for soap
PRODUCT USED IN: Soap - Melt & Pour
julie • Florida
Date Submitted: 09/20/2016
I Recommend This Product!
"Perfect size for imbeds"
COMMENTS: I loved this mold for making gumball soap and for making "cherries" for the top of my frosted cupcake soap. SO cute!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• nothing
Nancy • South Carolina
Date Submitted: 09/17/2016
I Recommend This Product!
"Perfect!"
COMMENTS: I recently received this round ball 1 1/4 silicone soap mold and I LOVE it! It makes perfect little balls. I made the Cranberry "snowball" sugar scrub and they came out beautifully!
PRODUCT USED IN: Exfoliants & Sugar Scrubs
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• easy to use • comes out easily
Amy • Texas
Date Submitted: 09/03/2016
I Recommend This Product!
"Perfect"
COMMENTS: Works exactly how it should, you get a nice round ball that is easy to pop out of the mold unscathed
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy removal of product from mold
Allena • New York
Date Submitted: 08/23/2016
I Recommend This Product!
"Love, love, & love."
COMMENTS: This product came in handy for me to decorate my soap loafs. It creates perfectly round sphere balls and comes out of the mold with ease. This mold is constantly used for my soaps. I love it .
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Everything • Easy to remove soap from molds
• Nothing
Alysa • Georgia
Date Submitted: 03/20/2016
I Recommend This Product!
"Excellent Product"
COMMENTS: Great to make small soaps for quest baths or bath bombs!!! kids love this
PRODUCT USED IN: Soap - Melt & Pour
Karen • Washington
Date Submitted: 02/15/2016
I Recommend This Product!
"LOVE THIS MOLD!"
COMMENTS: As with all of WSP silicone molds. I LOVE IT! I think I own almost each and every one they sell. Yes! I definitely need an intervention! What can I say? I make little gum balls with this mold with of course gum ball fragrance. The kids love them!
PRODUCT USED IN: Soap - Melt & Pour
Tabitha • Michigan
Date Submitted: 02/13/2016
I Recommend This Product!
"So fun!"
COMMENTS: Love this mold and the soap size it makes. My only issue with it is that the silicone attracts fuzz and dust so easily.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• size • smoothness
Kendra • Colorado
Date Submitted: 10/25/2015
I Recommend This Product!
"Makes adorable little globes!"
COMMENTS: I love this mold, only thing, I wish there was a way to stop the "flat bottom". I fill the mold up as high as I can, but still, you cannot escape the flat bottom. This does not cause a problem if I use the globes as toppers on my soaps, but if I want to use them as embeds, they have to be positioned in a way that hides the flat bottom or else it looks weird. Still love the mold though! I give it my official thumbs up!
PRODUCT USED IN: Soap - Melt & Pour
Veronica • Texas
Date Submitted: 10/06/2015
I Recommend This Product!
"really good mold"
COMMENTS: happy with this product, very very easy to use, release and clean
PRODUCT USED IN: Soap - Melt & Pour
Marie • South Dakota
Date Submitted: 08/11/2015
I Recommend This Product!
"Makes cute gumballs"
COMMENTS: I used this with multiple colors in M&P soap. I then placed them in the WSP Silicone Loaf mold and used Bubble Gum FO. I was adorable. Kids loved it and it smelled exactly like bubble gum.
The mold is of excellent quality. The balls come out easily and shaped perfectly.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Well made mold • Easy to use
Rebecca • New Jersey
Date Submitted: 04/30/2015
I Recommend This Product!
"Very east to unmold"
COMMENTS: Love the way the balls come out and is extremely easy to unmold. Used with my soaps and looked great!
PRODUCT USED IN: Soap - Melt & Pour
sylvie • New Jersey
Date Submitted: 03/06/2015
I Recommend This Product!
"soap decorating"
COMMENTS: I also purchased the smaller version to help give my soap designs a more dimensional look.
PRODUCT USED IN: Soap - Cold Process
veronica • Texas
Date Submitted: 02/18/2015
I Recommend This Product!
"mp bubble gum soap"
COMMENTS: Love the mold. Used to make Bubble Gum soap. Worked out great. Easy release.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy to use
YTS • Texas
Date Submitted: 01/29/2015
I Recommend This Product!
"I love it for inbeds"
COMMENTS: I love it for inbeds. I use them for small lotion bars that I cut in 1/2 and then put them in small containers.
COMMENTS: This little mold is genius! I have used it in so many loaf projects. Different colored soap balls loaded into the silicone loaf with a coordinated color poured over it. Makes final product look so detailed and complicated, but it is a breeze. Easy to unmold the little soap balls too.
PRODUCT USED IN: Soap - Melt & Pour
Katie • Texas
Date Submitted: 10/15/2014
I Recommend This Product!
"Just the Best!"
COMMENTS: This is honestly the cheapest, most durable, high quality mold I could find of this shape and size! It's ridiculously awesome and I will certainly be buying two more! :D
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Cere • Texas
Date Submitted: 09/09/2014
I Recommend This Product!
"Works Great!"
COMMENTS: Easy to pour into opening -- and came out like a charm!
PRODUCT USED IN: Soap - Cold Process
Sarah • Florida
Date Submitted: 08/27/2014
I Recommend This Product!
"Love this mold!"
COMMENTS: I just received this mold last week, and have used it for both MP and CP soap. Very happy with results for each, and easy to remove soap from mold as well! I wish there was a way it made a perfect circle (the top opening part is flat), but otherwise I love it!
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Retired Soap Molds
