Milky Way™ Shells 3 Soap Mold Tray (MW 167) - Wholesale Supplies Plus
Current Processing Times: 5-7 Business Days FREE SHIPPING ~ On Orders Over $25*
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Shell, Sand Dollar, Turtles - (You Are Here - P10164)

Milky Way™ Shells 3 Soap Mold Tray (MW 167)

$7.73 for 1 Each
$33.31 for 5 Mold
$106.69 for 20 Mold
$428.88 for 150 Mold (Bulk)

Additional Information
The Shells Soap Mold Tray features three different shell designs, including conch, scallop, and conical. Perfect for beach houses or just bringing a touch of the seashore inside.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Tray
Avg. Bar Weight: 4 oz Bar Cavities: 9
Bar Depth: 1.375" Bar Length: 2.625"
Bar Width: 2.625" Max Temperature: 145ºF
Mold Capacity (oz): 36

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (3)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 3 Question(s) Shown Below

Q Bubble
Posted By: Martin   |   May 08, 2018

"Hi there!... I would like to know if can I divide every different shell in 9 pieces like if were a chocolate bar? And if, which would be the weight of each one?Thanks!.. (Cause I don't know if the photo is a whole mold or just one soap bar example)"

Q Bubble
Posted By: Susan   |   February 10, 2015

"Instead of cooking oil, could I use Cyclomethicone as a release agent, when using this mold for CP soap?"

Q Bubble
Posted By: Makita   |   August 20, 2014

"What size bars does this mold make?"

Recipes & Videos (0)
CustomerReviews (3)
Submit A Rating Average Customer Rating: (3 Reviews)

Leah • Kentucky

Date Submitted:  06/06/2016

I Recommend This Product!
"Great mold!"
COMMENTS:  I love the detail in this one! I have had no issues getting the soaps out of this mold.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Shampoo Bars, Soap - Shave Shampoo
Jamie • New York

Date Submitted:  05/09/2016

I Recommend This Product!
"Nice Soap Mold"
COMMENTS:  This is a nice soap mold! It is very easy to cut the bars when un-molded - something I was worried about when I purchased it.
PRODUCT USED IN:   Soap - Melt & Pour
Linda  • North Carolina

Date Submitted:  11/24/2014

I Recommend This Product!
"Beach soaps sell well "
COMMENTS:  These seashell soaps have been great. They are the perfect 4 oz size for my products and the designs are so pretty. I enjoy using milky way molds so these are no exception.
PRODUCT USED IN:   Soap - Melt & Pour
• Makes beautiful detailed soaps
• Like 4 oz bar size
• Enjoy working with milky way molds
Customer Photos (1)
Charts & Calculators
Stay updated on sales, new products, free recipes, and more.

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2022 Wholesale Supplies Plus, LLC - All Rights Reserved