Milky Way™ Snowflake 3 Soap Mold (MW 174) - Wholesale Supplies Plus
Current Processing Times: 1-2 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Snowflakes & Snowman - (You Are Here - P10212)

Milky Way™ Snowflake 3 Soap Mold (MW 174)


Additional Information
Capture the magic of winter in the beautifully detailed Three Snowflakes Soap Mold. Try adding a dash of peppermint oil for that perfect Christmas season ambience.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 3.5 oz Bar Cavities: 3
Bar Depth: 1.125" Bar Diameter: 3
Bar Length: 3" Bar Width: 3"
Max Temperature: 145ºF Mold Capacity (oz): 10.5

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below

Q Bubble
Posted By: lori   |   September 21, 2014

"What is the size of the soap and the approximate ounces? "

Recipes & Videos (1)
CustomerReviews (6)
Submit A Rating Average Customer Rating: (6 Reviews)

Sharon • Pennsylvania

Date Submitted:  12/08/2017

I Recommend This Product!
"Perfect for the season"
COMMENTS:  I love this mold and can easily make the snowflakes a different color from the base which my customers love. I do have some difficulty unmolding the soap, but usually after 15 minutes in the freezer they come out ok. Just have to wrap them in saran wrap quickly to keep the moisture at bay. Lovely molds for Christmas and winter time.
PRODUCT USED IN:   Soap - Melt & Pour
• Easier to unmold
Sarah • Michigan

Date Submitted:  05/09/2017

I Recommend This Product!
"Long-lasting, non-warping"
COMMENTS:  I use these for syndet bars which are quite hot when poured. They have not warped at all. Bars are easier to pop out of than the heavy duty molds. I only wish they would stay shiny longer! Once I've washed them a few times they get a rougher texture. I'm going to try to soak them longer and not scrub as much with my new ones.
PRODUCT USED IN:   Soap - Hot Process
• the size is true, 3 inches, 3 ounces
Gail • California

Date Submitted:  11/18/2016

"Too hard to get the soap out!"
COMMENTS:  The first couple of batches I made were easy enough to pop the soap out of the mold. The snowflake soaps are so pretty once you get them out of the mold, however! It got harder with each subsequent batch(even after putting in the freezer for just a bit)and then the entire mold would bend and shift as I tried to push the soaps out. Now the mold won't lay flat, so I have to add a tilt support so I don't get off sized, uneven soap bars.
PRODUCT USED IN:   Soap - Melt & Pour
• The pattern of the soap bars.
CarolAnn • New Mexico

Date Submitted:  04/10/2015

I Recommend This Product!
"Snowflake 3 Soap Mold 174"
COMMENTS:  This was so nice to use. The snowflake inside was deep and very easy to pour color into wthout going into the outer area. After resting a few minutes, spray with alcohol then pour on some white or clear soap with a glitter. They turn out just gorgeous. These will sell like crazy and no work at all. Gosh The kids will be able to help out with this one. It is cute,the little gloves and aprons and here they come. Got to love the soap patrol. Grows on you. Anyway, I am ordering every week and we are going to be a very busy crew around here. Our church gang is going to be making bath teas, fizzies and selling them. We are all having a wonderful time thanks to the wonderful products and staff at WSP.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars, Bath Fizzies & Salts
• Easiest mold to use. Pretty.
• Nothing.
Sherri • Ohio

Date Submitted:  01/11/2015

I Recommend This Product!
"Snowflake 3 Soap Mold (MW 174)"
COMMENTS:  Love how the soaps look, I learned it is much easier to remove the soap from the molds if they are full. I guess that was common sense. I should have bought several more of these molds.
PRODUCT USED IN:   Soap - Melt & Pour
Natalie • Illinois

Date Submitted:  11/30/2014

I Recommend This Product!
COMMENTS:  I am using this with my MP soaps. I wanted a "Frozen" soap for my girls and they have sold very well. I poured the raised area with a little darker blue and then filled the larger cavity with clear soap and blue glitter and it is really pretty. Little girls are loving them.
PRODUCT USED IN:   Soap - Melt & Pour
Customer Photos (1)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved