Milky Way™ Big Tray- Square Soap Mold (MW 143) - Wholesale Supplies Plus
Current Processing Times: 3-4 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Basic - Smooth Designs - (You Are Here - P9802)

Milky Way™ Big Tray- Square Soap Mold (MW 143)


Additional Information
Need to make a lot of soap at once? The Large Square Soap Mold Tray will make eighteen uniform square soap bars.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Tray
Avg. Bar Weight: 5.4 oz Bar Cavities: 18
Bar Depth: 1.125" Bar Length: 2.5"
Bar Width: 2.5" Max Temperature: 145ºF
Mold Capacity (oz): 98

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below

Q Bubble
Posted By: Barbara   |   April 23, 2014

"I have this mold but haven't used it because I don't want to line it with plastic wrap for CP soap. My fault for not reading the description thoroughly. What kind of cooking spray should be used on it for CP soap making? Just regular PAM or something else? If anyone has used this with cooking spray, how easy was it to get the CP soap out of the mold and did the spray affect the appearance of the soap? Thanks."

Recipes & Videos (1)
CustomerReviews (6)
Submit A Rating Average Customer Rating: (6 Reviews)

Alyssa • Maine

Date Submitted:  04/30/2017

I Recommend This Product!
COMMENTS:  Great quality and easy to use!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
• Bars pop out easily
srinirisha • Michigan

Date Submitted:  12/06/2016

"perhaps my fault but bought it for bath fizzies"
COMMENTS:  perhaps my fault but i thought this works for bath bombs and it doesnt.
PRODUCT USED IN:   Bath Fizzies & Salts
Michelle • New Jersey

Date Submitted:  11/14/2016

I Recommend This Product!
"Great mold! Lots of bars at once!"
COMMENTS:  This mold was our choice for our free Milky Way mold. I am SO happy with it. As with all plastic molds, It's a tiny bit of work to get the soap out, but once you release that suction, it comes out easily. We used this for our facial bars and the square was the perfect size. I was worried that it would cut unevenly, but the mold makes it super easy to cut clean bars.
PRODUCT USED IN:   Soap - Melt & Pour
• Size
• Quantity of bars
• More flexible
Leslie • Ohio

Date Submitted:  09/27/2016

I Recommend This Product!
"Great for large batches"
COMMENTS:  This is a great mold for anyone who needs to make a large batch of M&P soaps at once! The bars are pretty uniform, except I noticed that the outside edges are slightly beveled, so some of the bars don't come out as perfect as I'd like.
PRODUCT USED IN:   Soap - Melt & Pour
• easy to cut each bar uniformly
• makes a large bar!
• can make lots of bars at once
• make outside edges straight up and down
María Antonieta • Mexico

Date Submitted:  07/28/2016

I Recommend This Product!
"This product is very good for hot process soaps"
COMMENTS:  I used them by many years... very good plastic and easy to support high temperature in hot process soaps.
PRODUCT USED IN:   Soap - Hot Process
Holly • Oklahoma

Date Submitted:  12/28/2013

I Recommend This Product!
COMMENTS:  I can't believe I am the 1st to rate this....surely someone else has purchased this mold. It makes 18 perfect large square bars. Unmolds super easy. Cleans super easy. Doesn't retain scents from previous batches. The 18 bars is really nice for inventory stocking (shows, markets, etc). I just ordered 2 more !!!
PRODUCT USED IN:   Soap - Melt & Pour
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved