We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Give your children or students gold stars with handmade bars of soap made from this mold! This mold can also be used around the holidays or Fourth of July. Embed fits in Crafter's Choice Regular Loaf Silicone Mold 1501 and Rectangle Regular Column Silicone Soap Mold 2009.
Country Of Origin: China
Helpful Product Information:
Style: Column
Avg. Bar Weight: 7.4 oz
Bar Cavities: 1
Bar Depth: 8.25"
Bar Length: 1.75"
Bar Width: 1.75"
Max Pour Temperature: 135°F
Max Temperature: 500ºF
Mold Capacity (oz): 7.4
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Close the mold by firmly pressing the edges together. For added safety, clamp the edges. Slowly pour melted soap no hotter than 130ºF into mold. Allow soap to harden then open mold and remove soap. Trim edges with a potato peeler or spatula. Embed soap into a loaf or slice into bars.
Cold Process Soap: Close the mold by firmly pressing the edges together, and clamp the edges. Slowly pour traced soap into mold. After at least 24 hours, open mold and remove soap with gloved hands. Trim edges with a potato peeler or spatula. Embed soap into a loaf or slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: I love this star mold. It is a great embed size. I wish it was a little longer, it does not complete go to the end of a 2-pound loaf. But I still love it! Make sure you seal it propyl and it will not leak.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Midori • New York
Date Submitted: 04/09/2019
I Recommend This Product!
"This one's a keeper!"
COMMENTS: I had been eyeing this mold for a while, and when it went on sale, I grabbed it. I have not been disappointed; it makes creating loaves with star embeds so easy! You do need to make sure that the mold is fully sealed before pouring, but once you do that, it works like a dream. I've made superhero soap with this, and keep finding new uses for the star design. I only wish it were a little longer, so the star embed would completely fill a 2-pound loaf mold; as it is, it comes up a bit short. Other than that, though, I am very happy with this mold!
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Ease of use
• Could be a little longer
Danielle • Pennsylvania
Date Submitted: 12/07/2017
I Recommend This Product!
"Awesome!"
COMMENTS: Makes a perfect large star for soap loaves!
PRODUCT USED IN: Soap - Melt & Pour
Tracy • Pennsylvania
Date Submitted: 06/25/2017
I Recommend This Product!
"Great for embeds"
COMMENTS: I just used this mold this weekend to make a star embed for 4th of July soap. It was easy to lock, fill and release. This was the first time I used this type of mold and it was great.
PRODUCT USED IN: Soap - Melt & Pour
DeShawn • Florida
Date Submitted: 01/18/2017
I Recommend This Product!
"Fun mold, works great!"
COMMENTS: Fun mold to make embeds with. Love getting creative with these type of molds. Works great for both glycerin and cold process soap.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• easy release • durability
• nothing
John • California
Date Submitted: 11/01/2016
I Recommend This Product!
"Great Mold for making embeds"
COMMENTS: Very easy to use and seals very well. Works with either M&P or CP soap. An easy way to add design elements to any soap.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Karen • Washington
Date Submitted: 07/19/2016
I Recommend This Product!
"So Fun To Add Shapes Into Soaps"
COMMENTS: I love all of the silicone column molds. It is kind of tricky when you first start using them as you have to make sure you have them well sealed all the way around, but once you master that, it is a breeze. I love putting them in my M & P loves for added character in my bars.
PRODUCT USED IN: Soap - Melt & Pour
LaKishia • Maryland
Date Submitted: 07/13/2016
I Recommend This Product!
"Great"
COMMENTS: I had no problems with this mold. I just made sure it was snapped in very well. I like to make stars soaps for my little girls.
PRODUCT USED IN: Soap - Melt & Pour
Rachel • Missouri
Date Submitted: 10/05/2015
I Recommend This Product!
"Easy to use"
COMMENTS: Great mold. Easy to use. I used a binder clip to hold everything closed just in cast of leaks.
PRODUCT USED IN: Soap - Melt & Pour
Gail • Nevada
Date Submitted: 08/01/2015
I Recommend This Product!
"Perfect for making soap pretty"
COMMENTS: This works very well as long as you make sure the seal is tight, and you pour at under 120 degrees. Easy to unmold, and use in loaf molds.
PRODUCT USED IN: Soap - Melt & Pour
JamiAnn • Utah
Date Submitted: 05/19/2015
I Recommend This Product!
"Works OK"
COMMENTS: I used this for an embed in cold process soap. I followed the advice of some other reviewers and clamped the sides and bottom with paper pinch clamps. When using these I had no leakage and the star seemed to release from the mold easier. After making my fourth batch, I got lazy and didn't clamp as well and had leakage and the star didn't release as easily from the mold. I think freezing the soap before removing will help with this next time.
It would be nice if the mold were longer so the embed fits a 2 pound log mold.
Other than that it makes a nice embed for cold process soap!
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• longer mold • better seal
Kathy • Oklahoma
Date Submitted: 05/18/2015
I Recommend This Product!
"Just Right"
COMMENTS: It turned out just as I wanted. Easy Peasy!
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy to unmold
Rachelle • Colorado
Date Submitted: 04/08/2015
I Recommend This Product!
"Perfect size!"
COMMENTS: Just got these in and will be making embeds today. They are the perfect size for my bars. I keep saying this on other reviews of the other shapes, but my mind is full of ideas for these. That is a good thing. Wish I had more of them. They are well made. You can clip the sides with clothes pins or use a rubber band for extra security if you are worried about leaking. They should not leak at all if you have pressed ALL the sides together properly before filling. As I was preparing mine for my project in a few minutes, I thought I had sealed it well. But when I double checked it, I had missed a small area. Glad I checked it again before filling it.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Size and shape
Debbie • Missouri
Date Submitted: 03/11/2015
I Recommend This Product!
"Americana"
COMMENTS: I have some soap molded and ready to use as embeds in my patriotic soaps for summer. These column molds are much easier to use than the other silicone molds that you have to push all the way out. I haven't had any trouble with these at all.
PRODUCT USED IN: Soap - Cold Process
Marie • South Dakota
Date Submitted: 02/05/2015
I Recommend This Product!
"EXCELLENT Mold!"
COMMENTS: This is a very sturdy mold. It seals in the soap and there is no leakage.
Its very easy to unmold as well. Fits perfectly in Silicone loaf mold 1501 if you are using it for an embed.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Very Sturdy • Easy to mold and unmold
YTS • Texas
Date Submitted: 01/29/2015
I Recommend This Product!
"I love this silicone mold"
COMMENTS: It has the perfect size to use with the other embeds and the regular mold!
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Retired Soap Molds
