We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Welcome to the new home for
Elements Bath & BodyRustic EssentualsJust ScentCrafter's ChoiceMake Your Own.buzz
Elements Bath & Body Rustic Essentuals Just Scent Crafter's Choice Make Your Own.buzz
products are now exclusively available on Wholesale Supplies Plus.
This romantic heart design is full of swirls and life. The Victorian Heart Soap Mold is perfect for Valentine's Day or weddings.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Helpful Product Information:
Material: Plastic
Style: Bar
Mold Capacity (oz): 12.75
Bar Cavities: 3
Avg. Bar Weight: 4.25 oz
Bar Length: 3"
Bar Width: 2.75"
Bar Depth: 1.25"
Max Temperature: 145ºF
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does not need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does not need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: This is a gorgeous mold. My soaps turned out beautiful... once I was able to get them out. If I had a complaint at all, it would be how difficult that was. I've used plastic molds before, but this one was a little difficult. The design is beautiful though.
PRODUCT USED IN: Soap - Melt & Pour
Anne • California
Date Submitted: 08/19/2017
I Recommend This Product!
"Nice Mold"
COMMENTS: I really like this mold. It makes nice hearts that look like a cross between celtic and victorian design. I just ordered my 3rd one so that I can use them to make favors for my daughters wedding. Out of all my molds this is the one she chose for her wedding soaps. I mainly use it for melt and pour, but have used it for bath bombs and lotion bars too. It worked fine for both those.
COMMENTS: As always with Milky Way molds: perfection. These are built the way plastic molds should be: perfectly balanced (so that the mold doesn't tip off-level when you pour one cavity), perfect strength for an incredible life-span, and perfect beauty and uniqueness. These hearts are the perfect size & weight -- just right to grip in the hand. I love them!
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Quality of mold material • Quality of mold balance • Uniqueness/beauty that is Milky Way!
• I would ***LOVE*** a guest size!
Angie • New York
Date Submitted: 09/30/2015
I Recommend This Product!
"Love this heart mold!"
COMMENTS: I love the size and shape of this heart mold. Perfect for Valentine's Day or just becaus.
PRODUCT USED IN: Soap - Melt & Pour
sharon • Ohio
Date Submitted: 09/16/2015
I Recommend This Product!
"Very pretty. Quite a bit bigger then I expected. "
COMMENTS: This mold it very nice, the design is pretty and clear. It's hard to judge the sizing on the milky way molds. This is very large for a bar of soap, the mold is very deep. I know it tells you the ounces each holds, but it would be nice if there another picture to help with the sizing. Other then that it is as expected. The milky way molds does remind me of the Wilton chocolate molds which don't really hold up so well to a lot of uses, so I guess I'll have to just see how this one stands up.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• design is clear
• Better pictures
Cindy • Wisconsin
Date Submitted: 01/30/2015
I Recommend This Product!
"Very pretty heart mold"
COMMENTS: This heart mold is perfect for soaps and bath bombs. I usually don't like hearts but, I do like this mold. Feels pretty sturdy so I should have it around for a while. Nice mold.
COMMENTS: I like the sturdiness of this mold. Soaps came out fairly easily. (I poured them at medium trace and let sit in mold 2 days.)
PRODUCT USED IN: Soap - Cold Process
Karen • North Carolina
Date Submitted: 03/19/2004
I Recommend This Product!
"Beautiful!"
COMMENTS: So easy to work with and such lovely results.
PRODUCT USED IN: Soap Products
Ann • Michigan
Date Submitted: 01/31/2004
I Recommend This Product!
"Beautiful Mold!"
COMMENTS: This mold is beautiful! I made some soaps for Valentine's Day using this mold & they came out stunning!
PRODUCT USED IN: Soap Products
LoriAnne • North Carolina
Date Submitted: 01/20/2004
I Recommend This Product!
"I loved this mold"
COMMENTS: Worked great for Valentine's Day gift soaps, was easy to work with. The finished product was beautiful, and simple to pour. Was a nice size for my two-bar gift crates.
PRODUCT USED IN: Soap Products
Show more
Customer Photos
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!