Milky Way™ Yin Yang Soap Mold (MW 29) - Wholesale Supplies Plus
WSP Latest News ~ COVID-19 Updates
Lead Times 8-10 Business Days FREE SHIPPING ~ On Orders Over $25*
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Yoga, Henna & Buddha - (You Are Here - P9854)

Milky Way™ Yin Yang Soap Mold (MW 29)

$6.95 for 1 Mold
$29.95 for 5 Mold
$95.95 for 20 Mold
$385.70 for 150 Mold (Bulk)

Additional Information
In Chinese philosophy, the concept of yin and yang is used to describe how opposite, contrary, or complementary forces (light and dark) are interconnected and interdependent. The Yin Yang Soap Mold is a version of the familiar Taijitu symbol.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 5 oz Bar Cavities: 3
Bar Depth: 1.25" Bar Diameter: 3
Bar Length: 3" Bar Width: 3"
Max Temperature: 145ºF Mold Capacity (oz): 15

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (2)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 2 Question(s) Shown Below

Q Bubble
Posted By: Brandi   |   April 22, 2015

"What is the actual diameter of the soap bars made with this mold? "

Q Bubble
Posted By: Kim   |   November 30, 2014

"Will these fit in 4 oz metal tin?"

Recipes & Videos (0)
CustomerReviews (4)
Submit A Rating Average Customer Rating: (4 Reviews)

Carol • Wisconsin

Date Submitted:  11/27/2016

"Makes beautiful soap"
COMMENTS:  I love the look of this mold. It makes about 4 oz of soap. But the problem is that the mold doesn't stay flat, so the bars are uneven. I much prefer silicon molds as the Milky Way molds are rigid and unforgiving. You need to put the mold in the freezer to get the soap out. Once you bend the mold to get the soap out, it never flattens out which results in subsequent soaps being uneven.
PRODUCT USED IN:   Soap - Melt & Pour
• The look of the soap
• Nice size
• Hard to get soap out of mold
• Mold doesn't lay flat
Lynne • New Mexico

Date Submitted:  08/07/2015

I Recommend This Product!
"Love it!"
COMMENTS:  I love this mold...fits in nicely with my Asian themed soaps and is very popular in my area. So many different color variations are posible...not just black and white. The only problem I've run into is the size...5 oz. is a big bar...I would like it better if it was 3.5 to 4 oz. So I just pour it short to achieve those weights. Releases with no problems.
PRODUCT USED IN:   Soap - Melt & Pour
• Fits with my Asian themed soaps
• overall's a big bar

Date Submitted:  04/21/2015

I Recommend This Product!
"yin yang"
COMMENTS:  very easy mold to use. Great results.
PRODUCT USED IN:   Soap - Melt & Pour
Timothy • West Virginia

Date Submitted:  09/13/2014

I Recommend This Product!
"Great Product!"
COMMENTS:  I love these for my mp soap, makes a great gift. Very popular mold I'm glad I got it!!
PRODUCT USED IN:   Soap - Melt & Pour
Customer Photos (0)
Charts & Calculators
Stay updated on sales, new products, free recipes, and more.

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2021 Wholesale Supplies Plus, LLC - All Rights Reserved