WSP Latest News ~ COVID-19 Updates
Lead Times 3-5 Business Days FREE SHIPPING ~ On Orders Over $25*
 
 
Wholesale Supplies Plus
0
 
   
 
 
 
Soap Molds Plastic & Silicone Molds Snowflakes & Snowman - (You Are Here - P14048)

Crafters Choice™ Snowflake Mini Column Silicone Soap Mold 2032

Pricing
$18.27 for 1 Mold
$76.16 for 5 Mold
$803.92 for 60 Mold (Bulk)



Additional Information
Use this Snowflake Mini Column Soap Mold to design a winter wonderland! Combine with the Crafter’s Choice® Snowflake Column Mold to make snow flurries in your soap. Embed fits in Crafter’s Choice Regular Loaf Silicone Mold 1501 and Rectangle Regular Column Silicone Soap Mold 2009.

Common Uses:
Melt & Pour Soap. Cold Process Soap.

Points of Interest:
This soap column mold makes one 1” soap column that can be embedded into a loaf. The silicone construction allows for easy soap removal. One side of the mold is hinged and three sides have edges that seal closed. The mold can stand on its own, but we recommend leaning it against an upright mitre box or a sturdy object before filling with soap. See “Directions” for more information on how to use this mold.

Manufacturer: Crafter’s Choice®
Material: Silicone
Style: Column Mold
Number of Cavities: 1
Country of Origin: China
Color: Natural Semi-Transparent
Max. Temperature: 500ºF
Wash molds in warm, sudsy water.

Country Of Origin: China

Helpful Product Information:
Style: Column Bar Cavities: 1
Bar Depth: 1" Bar Length: 8"
Bar Width: 1" Max Pour Temperature: 135°F
Max Temperature: 500°F Mold Capacity (oz): 2.15



This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Close the mold by firmly pressing the edges together. For added safety, clamp the edges. Slowly pour melted soap no hotter than 130ºF into mold. Allow soap to harden then open mold and remove soap. Trim edges with a potato peeler or spatula. Embed soap into a loaf or slice into bars. To minimize bowing, fill in three pours allowing the soap to harden between pours.

Cold Process Soap: Close the mold by firmly pressing the edges together, and clamp the edges. Slowly pour traced soap into mold. After at least 24 hours, open mold and remove soap with gloved hands. Trim edges with a potato peeler or spatula. Embed soap into a loaf or slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Care:
Hand wash mold in warm, sudsy water.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below



Q Bubble
Posted By: Stephanie    |   October 25, 2019

"Finding it very difficult to get snowflake out in one piece. Tried chilling it for hours, letting it set for extra long cure, any ideas, suggestions"


Recipes & Videos (1)
CustomerReviews (1)
Submit A Rating Average Customer Rating: (1 Reviews)



Theresa • New York

Date Submitted:  05/13/2020

I Recommend This Product!
"Too Cute!"
COMMENTS:  I received awhile ago but just tried this mold last nite. I clamped it all around because I noticed other reviewers for column molds said the seals were not tight, I tried first with out clamps, just using water to test and it leaked. With the clamps tiny bit of leakage at the seams. It un-molded nicely, no problems. Little cleanup in a few spots, but success! Very satisfied with this mold, but would like to see it a little longer so I can use it in my loaf pan. Can’t wait to use it for my holiday soaps!!
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Unmolded easily
• Nice size for embeds
• Length
Customer Photos (0)
Charts & Calculators
 
 
Stay updated on sales, new products, free recipes, and more.
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Site Feedback

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2020 Wholesale Supplies Plus, LLC - All Rights Reserved