Wilton™ Brownie Bite (24 Mini Squares) Silicone Mold - Wholesale Supplies Plus
 
Current Processing Times: 6-7 Business Days
 
 
Wholesale Supplies Plus
216-503-9361 Email Us Frequently Asked Questions Calculating Processing Times Suggest A Product
My Account & Orders Wish List Tax Exemption Form
Cart Icon
0
 
 
 
 
 
 
Soap Molds • Plastic & Silicone Molds • Food & Bakery - (You Are Here - P7510)

Wilton™ Brownie Bite (24 Mini Squares) Silicone Mold

Brownie Bite (24 Mini Squares) Silicone Mold Brownie Bite (24 Mini Squares) Silicone Mold Brownie Bite (24 Mini Squares) Silicone Mold
photo icon See customer photos

Document IconProduct Details

Create single-use salt and sugar scrubs with this Wilton Brownie Bite Silicone Mold. It can also be used for soap and bath fizzies.

Material: Food Grade Silicone
Maximum Product Pour Temp: 500ºF
Makes (24) .50 ounce bars
Dimensions: 1.5" x 1.5" x .75"



Helpful Product Information:
Style: Bar Mold Capacity (oz): 12
Bar Cavities: 24 Avg. Bar Weight: 0.5
Bar Length: 1.5" Bar Width: 1.5"
Bar Depth: 0.75" Max Temperature: 500ºF

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.

Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.

Care:
Hand wash in warm sudsy water.

Product Information:

Country Of Origin China

CA Prop 65

Documents:

Non-Hazardous Statement Animal Testing Statement
Question icon Have more questions? See Q&A

Clipboard IconRecipes & Videos (8)

Question Mark IconQuestions & Answers (4)

Comment IconCustomer Reviews (28)

Photo IconCustomer Photos

Levels IconCharts & Calculators
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Coupons
Safe Sale Guarantee
Making Bulk Purchases 		216-503-9361
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Careers/Job Openings

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved