We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Welcome to the new home for
Elements Bath & BodyRustic EssentualsJust ScentCrafter's ChoiceMake Your Own.buzz
Elements Bath & Body Rustic Essentuals Just Scent Crafter's Choice Make Your Own.buzz
products are now exclusively available on Wholesale Supplies Plus.
The Farmhouse Guest Silicone Mold has eight rounded rectangular cavities. Each cavity has 7 ridges that will make for a unique and textured bar of soap! More details
The Farmhouse Guest Silicone Mold has eight rounded rectangular cavities. Each cavity has 7 ridges that will make for a unique and textured bar of soap!
Common Uses:
Melt & Pour Soap. Cold Process Soap. Hot Process Soap. Lotion Bars.
Points of Interest:
Material: Food Grade Silicone
Maximum Product Pour Temp: 500ºF
Helpful Product Information:
Style: Bar
Bar Cavities: 8
Avg. Bar Weight: 1.2 oz
Bar Depth: 0.75"
Bar Length: 2"
Bar Width: 1.5"
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: I'm not a fan of the smaller size, cute as guest soap but trickier for pouring. I wish I would have ordered the larger farmhouse mold. I do like the shape and the ridges.
PRODUCT USED IN: Soap - Cold Process
Kimberley • Nevada
Date Submitted: 10/18/2020
I Recommend This Product!
"Perfect"
COMMENTS: I love this mold for my travel soaps. They are adorable!
PRODUCT USED IN: Soap - Melt & Pour
Julie • Utah
Date Submitted: 10/11/2020
I Recommend This Product!
"Great Little Mold"
COMMENTS: I love this little mold--super easy to use with CP and a good quality silacone. I enjoy the classic shape so I think I'll get the larger size for regular full bars.
PRODUCT USED IN: Soap - Cold Process
Kathryn • Connecticut
Date Submitted: 08/16/2019
I Recommend This Product!
"Great mold for guest soaps"
COMMENTS: I picked up this little mold as way to use up extra CP soap batter while making larger soap projects, and it did not disappoint! The ridges give it a little more visual interest than the typical guest mold, and the bar size is perfect for travel and in bathrooms/powder rooms. I'm planning to order a second mold to make full batches in guest size.
For cold process soap, the ridges will have the best definition if you pour at thin to medium trace.
PRODUCT USED IN: Soap - Cold Process
Kerri • Texas
Date Submitted: 02/14/2019
I Recommend This Product!
"Perfect little bars of soap!"
COMMENTS: I was so excited to use this mold. It did not disappoint! The silicone is excellent quality. The first little bar to remove takes a little time, I think because the cavities are so close together, but no problem at all after that. The style is very popular. I can make 3 batches from just a 2lb block of MP base! I can't wait to try the larger bars!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• The style. • The size. • The quality.
• Space the cavities out a little more.
Luz • Indiana
Date Submitted: 11/14/2018
I Recommend This Product!
"Great mold!"
COMMENTS: I am in love with this mold. It's so easy to use and handle and clean. It's well very well made.
COMMENTS: I love that the silicone is thicker. I feel that it makes for better quality pours, as it doesn’t wrinkle the back of the soap when you lift the tray to love it. Thinner molds have the tendency to do so. The ridges on top five it that little but of extra and I’ve gotten tons of compliments already!
COMMENTS: I've been looking for a mold like this for a while now- just never knew that WSP had it! The ridges give the soap the 'handmade" look I want without looking commercial. Easy to pop out the bars from the mold once they are firm.
It is a little tricky to clean the mold because some soap will want to stick in the ridges, using a soft tooth brush will remove the stuck on soap residue.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Hot Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• shape • easy to remove from mold • the ridges
Rachelle • Colorado
Date Submitted: 01/14/2018
I Recommend This Product!
"Farm Mold"
COMMENTS: This mold is OK. I wanted to buy the bigger size but each time I put it in my cart it went out of stock so I ended up getting this size. It works for small sample bars.
PRODUCT USED IN: Soap - Cold Process
Toni • Michigan
Date Submitted: 11/18/2017
I Recommend This Product!
"Get it!"
COMMENTS: This is my favorite mold by far! It makes the cutest little soaps! It’s great also for the back up mold when you have extra soap left. This would also be great for little hands!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Silicone • Size • Shape
• Would love a large size of this, meaning • more bars per mold.
Diane • Illinois
Date Submitted: 11/09/2017
I Recommend This Product!
"Great Product"
COMMENTS: Beautiful and great quality. Must get another.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• heavy duty
Emily • Virginia
Date Submitted: 06/27/2017
I Recommend This Product!
"Super Cute"
COMMENTS: Exactly what I wanted, and super high quality sturdy mold
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Anna • Ohio
Date Submitted: 05/25/2017
I Recommend This Product!
"Awesome!"
COMMENTS: Makes beautiful little guest soaps. Love it. I am going to buy another one!
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Everything
• Nothing
Show more
Customer Photos
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!